Electrical Testing - Page 199

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: TA72

The FLIR Universal Flex Current Probe Accessory is designed to add capabilities, simplify challenges and get the best readings with your existing meter. Made with a narrow, 25 cm (10") flexible coil clamp, you can easily take measurements in tight or awkward spots. Coupled with a standard output, it's compatible for use with most digital multimeters and clamp meters, regardless of brand. Comes with probe, batteries and manual.

Manufacturer: Gems Sensors Brand: Warrick Model: 16DB1B0

Engineered for general purpose single-level or differential applications, these economy priced controls have spade terminals for easy wiring and provide sensitivities up to 1 million ohm/cm. Same features and specifications as Series 16, but these controls also have DPDT load contacts to eliminate the need for slave relays.

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N6457A

The N6457A Soft carrying case is the perfect way to travel with or store your 2000 or 3000 X-Series oscilloscope. The case is designed for convenience with padded sides and bottom, as well as a storage pouch for your probes and additional accessories. When you order N6457A, you also receive the durable front panel cover to protect your oscilloscope during transport.

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N2853A

The Keysight N2853A low-cost passive probe provides a 10:1 attenuation and features a high input resistance of 10 M?. The probe can be adjusted for low-frequency compensation and high-frequency compensation. Compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 1 M? input. For the best measurements you should compensate your probe to match its characteristics to the oscilloscope. Probe ID is included.

Manufacturer: Made in usa Brand: awasy2415

3 MONTHS WARRANTYFULL REFUND!!!NEW OLD STOCK IN DIRTY BOX!!!(ZQ3-3-6)Exported By ExportYourStore

Manufacturer: Keystone Electronics Brand: Keystone Electronics

Test Plugs & Test Jacks Threaded banana plug

Manufacturer: Gems Sensors Brand: Warrick Model: 16MB1M0

Designed for either differential or single-level service. U.L. “Motor Controller” listing, 8 pin socket with screw-type connections make the unit easy to install and service. Sensitivity of up to 1 million ohm/cm.

Manufacturer: Fluke Corporation Brand: Fluke Model: TLK282

Kit includes insulation piercing clip set, automotive back probe pins (five), SureGrip silicone test lead set, SureGrip test probe set. Also includes SureGrip alligator clip set, SureGrip large jaw alligator clip set, SureGrip hook clip set, Soft case. Use the back probe pins to slide into weather pack connectors on fuel injectors, TPS and MAP sensors. A hook probe with plunger actuation allows quick connection to pins or exposed conductors. Tested to 60V DC.

Manufacturer: Fluke Brand: Fluke Model: FLUKE 117 Color: Electrician's True RMS Multimeter

Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact-voltage detection to help get the job done faster.

Manufacturer: Reed Brand: REED Instruments Model: ST-ELECTRICKIT

The Reed ST- ElectricKit Electrician's Combination Kit includes an AC clamp meter with temperature function, a voltage and continuity tester, a non-contact voltage detector with built-in flashlight, a temperature input adapter and Type K thermocouple wire probe, safety test leads, and a carrying case.The ST-335 clamp meter is an autoranging mini clamp meter with high resolution AC current measurement, temperature measurement to 1832°F/ 1000°C, 4,000-count backlit LCD screen, data hold and zero functions, diode test to 0.3mA and continuity buzzer, automatic shutoff, low battery indication, and a safety rating of European Union (EN) 61010-1 Category III up to 600V.The ST-9902N is a voltage and continuity tester with non-contact AC voltage detection, seven LEDs to indicate voltage, a beeper to indicate continuity, and a safety rating of Category III 600V. It has an AC voltage range of 12V, 24V, 48V, 110V, 230V, 400V, and 690V; a DC voltage range of 6V, 12V, 24V, 36V, 48V, 110V, and 220V; and a continuity range of 0 to 85kΩ. The tester runs on two AA batteries (included).The Reed AC-9 non-contact voltage detector is a pen-style detector for use on 50/60 Hz circuits, with a pocket clip, a built-in flashlight, and a voltage detection range of 90 to 600VAC. It runs on two AAA batteries (included), and a red flashing LED indicates the presence of live voltage. The detector has an EN safety rating of Category III 1000V.The TL 88-1 safety test leads can be used with the clamp meter. These two 48" flexible silicone insulated leads are heat- and cold-resistant and have stainless steel tips. One is black, and one is red.Specifications Clamp meter AC current range 40.00, 400.0 amp Clamp meter AC voltage range400.0mV, 4.000, 40.00, 400.0, 600VClamp meter DC voltage range 4.000, 40.00, 400.0, 600V Clamp meter resistance range400.0Ω, 4.000, 40.00, 400.0kΩ, 4.000, 40.00MΩClamp meter capacitance range40.00, 400.0nF, 4.000, 40.00,100μF Clamp meter frequency range5.000, 50.00, 500.0Hz, 5.000, 50.00, 150.0kHzClam...