SMAKNÂ® BNC to Dual Alligator Clips Lead Tester-1M
his series of BNC test leads combines the ever popular BNC interface with most of the commonly used test lab connection types such as alligator clips, banana plugs, and test clips. These test leads are very useful in a lab or real world environment for all your testing needs.
The Amprobe ST-101B socket tester is an outlet tester used to check and confirm the proper wiring of alternating current (AC) electrical outlets in residential settings. Three incandescent lights that indicate whether an outlet is correctly wired or the presence of five different wiring faults, including open ground, open neutral, open hot, hot/ground reverse, and hot/neutral reverse. The tester is designed to test 110 to 125V AC outlets and is UL and Canadian UL listed for safety. The ST-101B is used by electricians to test the wiring of electrical sockets in domestic and industrial settings. Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, or leads connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit; multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meter choice includes the electrical properties to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has multiple settings that correspond to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range. Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.
Range: â€“500uA to 500uA Internal Resistance: 40â€“80 ohm / 1.5â€“2K Weight: 0.35 lb. Designed to measure weak current or the potential difference in DC circuit. It may be used in experiments on bridge measurement, thermocouple, electro-magnetic induction and photoelectric effect etc.
Dimensions:48mm x 29mm x 22mm
Cutting Size: 45mm x 26mm
Power Supply: DC 3.5-30V
Measure Range: DC 0-33.00V
Display: four 0.36" digital LED tube
Display Color: Blue
Lead wire: 14cm (three-wire)
Refresh Rate: about 500ms / times
Accuracy: Â± (3 â€° +2 digits)
Working Temperature: -10 Â°c~ 65 Â°c
Red VCC : Power supply + (DC 3.5-30V)
Black GND: Power supply -Measurement signal -
Yellow VIN : Measurement signal +
1x Digital LED Voltmeter
RedJasper is said to have an active character that energises the spirit. It is aligned with the navel chakra, Manipura. This is a centre for dynamism and productivity.Red jasper is sometimes used to open this chakra and release its potential. The five/six sides of this generator point are said to represent the first /five/six chakras, culminating in the apex - the crown chakra Sahasrara. This creates a powerful tool for tapping into the energy of Manipura and vibrant red jasper. Size is approximate.
uxcell Analog Current Meter DC 20A 75mV Divider Shunt Resistor
Descriptions:1.An Ammeter Shunt allows the measurement of current values too large to be directly measured by a particular ammeter. 2.Could be used either in a Digital or an Analog meter.3.Good quality, good performance and easily installation.Specifications:Product Name: DC ShuntMaterial: Metal, PlasticColor: Black, Silver ToneAccuracy: 0.5 ClassCurrent: 20AVoltage Drop: 75mVDimension: 12 x 2.5 x 1.5cm / 4.7 inch x 0.98 inch x 0.6 inch(L*W*H)Net Weight: 60gPackage Content:1 x 20A 75mV DC Shunt ResistorÂ
Protect wires from chafing against drilled holes.Â Acts as a guard from the sharp sheet metal edges.These grommet set is for replacing old cracked grommets or for running new wires safely through body panels!Â Â
Description:Measures voltage range of DC 0-15V with accuracy of Class 2.5.Clear and easy to read scale and a button for fine tuning the dial.For electronic applications, auto circuit or other Voltage measurement devices.With dial pointer,there is no difficulity in seeing the display.A good car accessory to measure voltage efficiently and quickly.Specification:Product Name : Analog Voltmeter;Model : 85C1;Measuring Voltage Range : DC 0-15VAccuracy : Class 2.5;Meter Face Size(Approx) : 6.3 x 5.5 x 1cm/2.5inch x 2.2inch x 0.39inch(L*W*T);Thread Size:0.28 x 0.8cm / 0.11inch x 0.30inch(Dia.*L)Overall Depth : 5.8cm / 2.28inchColor:WhiteNet Weight : 58gPackage Content :1 x Analog VoltmeterSeveral Installing Parts