Electrical Testing - Page 20

Manufacturer: UNI-T Brand: UNI-T Model: UT139C Color: Red&Grey

Features: Display Count: 6000 Auto Range: √ Manual Range: √ True RMS: √ Bandwidth (Hz）: 45Hz ～1kHz V.F.C: √ Duty Cycle: 0.1% ～ 99.9% Diode: Around 3V NCV: √ Auto Power Off: Around 15 Minutes Continuity Buzzer: √ Low Battery Indication: ≤2.5V Data Hold: √ Relative Mode: √ MAX/MIN: √ LCD Backlight: √ Input Protection: 600Vrms Input Impedance for DCV: 1GΩ Max Specifications: DC Voltage (V): 60mV±(0.7%+3),600mV±(0.5%+2),6V/60V/600V ±(0.7%+3) AC Voltage (V): 60mV/600mV±(1%+3) ,6V/60V/600V±(0.8%+3) DC Current (A): 600μA/6000μA/60mA/600mA± (0.7%+2) ,6A/10A ± (1%+3) AC Current (A): 600μA/6000μA/60mA/600mA±(1%+3) ,6A/10A±(1.2%+3) Resistance (Ω): 600Ω±(1%+2),6kΩ/60kΩ/600kΩ±(0.8%+2),6MΩ±(1.2%+3),60MΩ ±(1%+5) Capacitance (F): 9.999nF Under REL status:±(4.0%+10),99.99nF-999.9μF±(4.0%+5),9.999mF-99.99mF ±10%(≤2mF) Frequency (Hz): 9.999HZ~9.999MHZ ±(0.1%+4) ,1%~99.9%(Not Defined) Temperature (°C): -40~0°C ±3,>0~100°C ±(1.0%+3),>100~1000°C ±(2.0%+3) Temperature (°F): -40~32°F ±5,>32~212°F ±(1.5%+5),>212~1832°F ±(2.5%+5) General Characteristics: Power: AA 1.5V * 2 LCD Size: 58mm * 36 mm Product Colour: Red and Grey Product Net Weight: 370g Package includes: 1 x UNI-T UT139C True RMS Digital Multimeters(Battery Installed) 1 pair x Test Leads 1 x Temperature Probe

Manufacturer: Fluke Brand: Fluke Model: TL76

FLUKE TL76 TEST LEAD SET, 2MM / 4MM

Manufacturer: GW Instek Brand: GW Instek Model: GLP-1A

The GLP-1A logic pulser can be used to perform in-circuit testing of TTL, CMOS, and many other logic devices at a maximum of 50 MHz. The GLP-1A is enhanced with a logic probe function with a minimum detectable pulse width of 10 ns, providing enough sensitivity for most applications. A Short 10 sec pulse width assures that no damage will occur to circuits whilst testing. With a weight less than 50g, a non-slip grip, and an external sync input, GLP-1A provides comfort and reliability for various troubleshooting tasks. Display: 8 digits with Hz, kHz, MHz, GHz, s, ms, microseconds, and overflow. Gate time: Variable from 10ms to 10s, or 1 period of input depending on whichever is greater. Accuracy: +/- (resolution +/- timebase error). Channel A: Range: DC coupling: 0.01Hz to 120 MHz, AC coupling: 30Hz to 120 MHz. Sensitivity: 10mV typical, 50mV maximum. Coupling: AC or DC, selectable. Filter: Low pass, selectable in or out for channel A (-3dB point, nominal 100kHz). Impedance: 1 megohms//40 picofarad. Attenuator: 1/1 or 1/20dB. Trigger level: -2.5VDC to +2.5VDC. Adjustment resolution: For frequency measurement, the maximum resolution is 100nHz for 1Hz and 0.1Hz for 100 MHz inputs respectively. For period measurement, the maximum resolution is 10ns for 1Hz input, and 0.1x10-15s for 100 MHz inputs respectively. Display accuracy: 7 digits for 1 sec gate time, 6 digits for 100ms gate time, 5 digits for 10ms gate time. Power Source, 100 MHz Bandwidth: 100V/120V/220V/230V +/- 10 percent, 50/60Hz AC. Measures 230mm width by 95mm height by 280mm depth.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3655

Non-terminated BNC tip adapter compatible with all 3.5 mm compact scope probes. Use in conjunction with oscilloscope probe cover shell. Reference Tektronix 013-0254-00. RoHS (2002/95/EC) compliant.

Manufacturer: Klein Brand: Klein Tools Model: D2000-9NE Color: Blue

Klein Tools is known world wide for the quality of its pliers. These High-Leverage Side-Cutting pliers are also designed for heavy-duty cutting. They can cut ACSR, screws, nails, and most hardened wire. The high-leverage design gives these pliers 46% greater cutting power than other plier designs.

Manufacturer: Pomona Electronics Brand: Pomona Model: B-8-0 Color: Black

Hands free testing in controlled voltage environment: 5000 Vdc; For CE compliance: not intended for hand held use at voltages above 33 Vrms/70 Vdc, 15A, +131ËšF (+55ËšC) max

Manufacturer: POMONA Brand: Pomona Model: 5268-C-24-POMONA

POMONA 5268-C-24 TEST LEAD, BNC PLUG, 500V

Manufacturer: ICM Controls Brand: ICM Controls Model: ICM321 Color: Multicolored

Defrost Control - replacement for Carrier CES0110063-xx controls.

Manufacturer: V&A Brand: V&A Model: VA311 Color: Red and Green

The V&A VA311 is an auto-ranging digital AC/DC clamp on meter, it can be used to measure AC/DC voltage and current, resistance, frequency, capacitance, continuity and even temperature. Accessories include AAA batteries, Test leads, Thermo probe, User manual.

Manufacturer: SainSmart Brand: SainSmart

Description: This is SainSmart DSO138 2.4" TFT 1Msps Digital oscilloscope kit for DIY. It's easy to solder. Perfect for students to identify elements, inline elements welding, soldering SMD components training. And you could also easily develop a secondary development kit based on SainSmart DSO138. For example, it can be changed to voltmeter, data loggers, and so on. * highest real-time sampling rate : 1Msps * Accuracy : 12Bit * Sampling buffer depth : 1024 bytes * Analog bandwidth : 0 - 200KHz * Vertical sensitivity : 10mV / Div - 5V / Div ( 1-2-5 progressive manner ) * Adjustable vertical displacement , and with instructions * Input impedance : 1MΩ * Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe ) * Coupling modes include DC / AC / GND * Horizontal time base range : 10μs / Div - 50s / Div ( 1-2-5 progressive manner ) * With automatic , conventional and single -shot mode , easy waveform capture the moment * Available rising or falling edge trigger * Adjustable trigger level position , and with instructions * Observable trigger waveform before ( negative delay ) * Can always freeze the waveform display (HOLD function ) * Comes 1Hz /3.3V square wave test signal source Package List: 1 x DSO138 2.4" TFT Digital Oscilloscope Kit DIY parts 1Msps 1 x Probe 1 x Acrylic DIY Case Note: 9V DC power supply required. Not included.