Electrical Testing - Page 217

Manufacturer: Aaronia Brand: Aaronia

[custom2] Download Data Sheet [/custom2]

Manufacturer: EAGLE SIGNAL Brand: EAGLE SIGNAL

RESET COUNTER

Manufacturer: Megger Brand: Megger Model: 242104-2-26

The Megger 242104-2 series duplex test lead with C-clamp is for use with Megger 247100, 247101, DLRO200, and DLRO600 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements. The lead has a maximum test current input of 100 amp. The C-clamp provides a hands-free connection to a conductor and can accommodate conductors up to 4" (10 cm). The C-clamp directs the current through the clamp and screw and the potential through a four-point anvil that is insulated from the clamp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardiza...

Manufacturer: GROUP MAX LIMITED Brand: Reed Instruments Model: MS2301-NIST

The REED Earth Resistance Meter has a resolution of 0.001Ω for low resistance measurements and an accuracy of ± 0.01Ω. The meter stores up to 99 resistance measurements and has a limit alarm. There is a user selectable alarm threshold from 1 to 100Ω and 1 second sampling time. This earth resistance tester measures leakage current to 1mA and neutral current to 20A and has a 4-digit 9999-count LCD.

Manufacturer: Veris Brand: Veris

Wall Mount Power Meter, 120-480V, 1V, CT Input, Modbus Output, Full Data Set Display, 5-Year Warranty

Manufacturer: Megger Brand: Megger

Technical Specification Item Battery Operated Megohmmeter Output Test Voltage 50/100/250/500VDC Insulation Resistance Range 100G Ohms Live Circuit Detection 0 to 600VAC/DC Display Digital/Analog LCD Accuracy +/-3% +/-2 Digits Auto Power Off Yes Safety Rating CAT IV 600V Leakage Current Range 10uA to 2000uA Auto Ranging Yes Features TRMS AC and DC Voltage Measurements Up to 600V Power Source (5) AA Batteries Includes Test Lead Set, Soft Canvas Carrying Bag and Instructions Manufacturers Warranty Length 3 yr. Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: Megger Brand: Megger Model: 6410-957

The Megger 212000 series insulation resistance tester measures insulation resistance and voltage in electrical installations, building maintenance, and electrical testing. The average-sensing meter help provide accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. This analog meter has manual range selection for flexibility of use and a guard terminal to eliminate surface current leakage. Selectable test currents allow use in a variety of applications. The tester is safety rated to European Standard EN61010-1, Category II, 300V and Category I, 600V. The Megger 212000 series is commonly used by electricians and electrical contractors.Specifications Voltage testing range 0 to 600V DC or TRMS Voltage test inhibit level 75V Weight 1kg / 2.3 lb. Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat II 300V, Cat I 600V Dimensions 130 x 125 x 180mm / 5.1 x 4.9 x 7 inchesH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has...

Manufacturer: HONEYWELL Brand: Honeywell

Uda2182-Ph1-Nn2-Nn-N-0E00-Ee Analyzer

Manufacturer: MEGGER Brand: Megger

' Hand Cranked Megohmmeter, Output Test Voltage 100/250/500/1000VDC, Insulation Resistance Range 2000 megohm, Live Circuit Detection 0 to 600VAC/DC, Resistance Range 5000 ohm, Display Analog, Accuracy +/-1.25 Percent of Scale Length, Includes Carrying Case and Test Leads '

Manufacturer: Amprobe Brand: Amprobe Model: AMB-55

The Amprobe AMB-55 industrial high-voltage insulation resistance tester is a digital meter that measures insulation resistance, current, capacitance, and voltage to help reduce shock hazards and downtime on electrical systems that include wires, cables, transformers, surge arresters, generators, and electrical motors. The tester has automatic range selection for increased safety. The unit measures 0 to 600V alternating current (AC) or direct current (DC), current from 0 to 5.5mA, capacitance from 0 to 50 microfarads, and insulation resistance from 0 to 10 teraohms using DC test voltages from 250 to 5,000V in 25V increments. The internal memory holds up to 1,000 test results for later download to a PC using USB or RS232 data interfaces. The tester is safety rated to European Standard (EN) 61010-1, Category IV, 600V. The unit has a programmable timer to perform Dielectric Absorption Ratio (DAR), Polarization Index (PI), dielectric discharge (DD), and step voltage tests. The tester is powered by six C batteries (included). The AMB-55 is designed for use by electricians and electrical contractors. Specifications Power supply (6) C batteries (included) Insulation resistance range 0 to 10 teraohms Test voltages 250 to 5,000V DC in 25V increments AC and DC voltage range 0 to 600V Current range 0 to 5.5mA Capacitance range 0 to 50 microfarads Weight (including batteries) 6.6 lbs./3kg Dimensions 12 x 5 x 10 inches/31 x 13 x 25cm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers,...