|
|
-
4.6 of 5.0 with 32 Reviews
SALE PRICE: $64.00 1% OFF
Manufacturer: Bacharach
Brand: Bacharach
Model: 0011-7029
Manufacturer: Bacharach
Brand: Bacharach
Model: 0011-7029
Accuracy is within 0.5% CO2 or 02. Test gases up to 850 Degree Fahrenheit. Replacement part for Pyrite CO2 and O2 Testing Kit. Image shown may NOT be accurate - Some show devices instead of parts; This is a PART, not the whole device. .
-
4.6 of 5.0 with 62 Reviews
SALE PRICE: $64.17 13% OFF
Manufacturer: ICM Controls
Brand: ICM Controls
Model: ICM281
Color: Multicolored
Manufacturer: ICM Controls
Brand: ICM Controls
Model: ICM281
Color: Multicolored
Furnace Control - replacement for OEM models including Carrier CES0110057-xx series control boards.
-
4.6 of 5.0 with 16 Reviews
SALE PRICE: $64.94 1% OFF
Manufacturer: EXSO
Brand: EXT-1170N
Manufacturer: EXSO
Brand: EXT-1170N
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $64.99 1% OFF
Manufacturer: SainSmart
Brand: SainSmart
Manufacturer: SainSmart
Brand: SainSmart
* Panel Type: TFT * Interface Type: Digital * The number of wiring: 50 PIN Digital (TTL) TCON
-
4.6 of 5.0 with 38 Reviews
SALE PRICE: $66.00 1% OFF
Manufacturer: MURATA POWER SOLUTIONS
Brand: Murata Power Solutions
Manufacturer: MURATA POWER SOLUTIONS
Brand: Murata Power Solutions
MURATA POWER SOLUTIONS DMS-30PC-0-RL-C VOLTAGE METER
-
4.6 of 5.0 with 22 Reviews
SALE PRICE: $66.99 3% OFF
Manufacturer: J-DEAL
Model: J-DEAL
Manufacturer: J-DEAL
Model: J-DEAL
•Automatic measurement: frequency, cycle, duty, Vpp, Vram, Vavg and DC voltage •6 triggering mode - 1Mhz Analog Bandwidth. Basic 1 Msps sample rate with 12 bit resolution •2.8" color 320*240 display. Micro SD card Waveform Storage •Complete measurement markers, signal characteristic and various trigger mode •Build-in test signal generator, Usb chargeable battery, and open source
-
4.6 of 5.0 with 8 Reviews
SALE PRICE: $67.24 4% OFF
Manufacturer: Honeywell
Brand: Honeywell
Model: UC100E1006
Color: White
Manufacturer: Honeywell
Brand: Honeywell
Model: UC100E1006
Color: White
Original Factory Replacement (UC100E1006) UV Bulb for Honeywell UV Germicidal Lamp - 18 Watt SnapLamp knob and bulb assembly.  With this knob/lamp assembly, future lamp replacement will require only the new lamp (UC18W1004) as the lamp itself is removeable. Fits:Model UV100E1043 Single-Lamp Reurn Air Unit.  Older Model UV100A1000 Return Air UnitReplaces UC100A1005 - (same bulb, blue handle rather than tan). Overall bulb length is 8½ inches, glass length measures 7½ inches. The bulb has has two glass tubes fused together and two filaments, each tube is ¾" in diameter.
-
4.6 of 5.0 with 28 Reviews
SALE PRICE: $67.37 1% OFF
Manufacturer: Shenzhenshi Kelushi Keji Youxiangongsi
Brand: KELUSHI
Manufacturer: Shenzhenshi Kelushi Keji Youxiangongsi
Brand: KELUSHI
|
APM820 Optical Power Meter Features User self calibration function Comfortable LCD display and optional backlight LCD display supports night operation Power measurements in dBm or mw and insertion loss in dB Low battery consumption, more than 150 hours continual operation time for two 1.5V alkaline batteries Optional 10 minutes Auto-off function Specifications 1) Insertion loss test in dB 2) Wide measuremen range High resolution: 0.01dB; Good accuracy:±0.2dB; 3) Insertion loss test in dB; 4) SM or MM applications 5) 2.5mm universal and FC, SC, ST, LC; 6) 850/1300/1310/1490/1550/1625nm calibrated wavelengths; 7) APM820 is for telecom testing, APM830 is for CATV testing; 8) Energy save mode: about 10 minutes no operation will cause the device automatic power off (can be cancelled); 9) Reference value storage; 10) Full energy can support above 150hours operation Fiber Optic Cable Tester Output optical power:>10mW Output distance:10 kilometers Output wavelength:650+-10nm Fiber Adapter:2.5mm universal and FC, SC, ST, LC Operating temperature:-20℃~60℃ Storage temperature:-40℃~85℃ Type of battery:2 X AAA alkaline batteries Fiber category:SM,MM product weight:120g Application Telecom Maintenance CCTV Maintenance Comprehensive cable construction system Optical instruments research and development Optical communication education and lab testing Other optical project
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $67.45
Manufacturer: Elenco
Brand: Elenco
Manufacturer: Elenco
Brand: Elenco
In addition to functions found in regular DMMs, this meter can also measure inductance in 5 ranges (4mH,40mH,400mH,4H, 40H), capacitance in 5 ranges (4nF,40nF, 400nF, 4uF, 400uF), frequency in 4 ranges(4KHz, 40KHz, 400KHz, 4MHz), TTL logic test, diode test and transistor hFE test. 5 AC/DC ranges up to 1000V (AC750V), 3 AC/DC current ranges up to 20A and 7 resistance ranges up to 4000 M ohms. Includes test leads, battery, spare fuse, and manual. Net weight: 1lb.
-
4.6 of 5.0 with 34 Reviews
SALE PRICE: $67.54 72% OFF
Manufacturer: Megger
Brand: Megger
Model: 230315-2
Manufacturer: Megger
Brand: Megger
Model: 230315-2
|
The Megger 230425-2 pistol grip lead and high-voltage probe is 4' (1.2 m) long and is for use with Megger 230425 AC/DC high pot tester. The probe has a pistol-grip style handle with trigger button that allows operator to take measurements without pushing a button on the meter.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.
|
|