Electrical Testing - Page 26

Manufacturer: Honeywell Brand: Micro Model: CSLA2CD-W/SCREWS Color: black

This sensor is easily used with the Arduino platform such as the Arduino UNO which only costs you $20 through Amazon (Sold separately). The Arduino UNO has 6 Analog channels to monitor a 0 to 5V range. The Arduino UNO can be setup as an AC or DC datalogger / O-Scope for monitoring both current and Voltage (Voltage monitoring requires the use of a Voltage divider to scale the Voltage down to the input range of data logger) . If you would like the free LabVIEW software to use the Arduino for a datalogger or data acquisition O-Scope let us know and we will give you a link to download it. The hole diameter on this sensor is about 0.43 inches so it would fit up to a size 4 or size 2 AWG wire. The biggest advantage of this type of sensor is that you can loop a wire through the sensor as many times as you want to strengthen the signal. For example, if you loop the wire through 10 times with a supply of 8 Volts DC, then the sensitivity of this hall effect transducer will be about 330mV instead of 33mV (10 times larger sensitivity). ASSEMBLY REQUIRED HERE. You will need to connect the positive pin of this sensor to a DC voltage regulator such as the 7508 8V regulator. To build this simple circuit you will need to use a soldering iron and a voltage regulator. See picture in the listing for a schematic showing detailed information on how to hook this sensor up. This current sensor is a linear output Hall effect transducer. For every Amp that it detects, it changes its output by a few millivolts. If you want to see the exact sensitivity then take a look at the sensitivity chart above. It ranges from 24mv at 5 Volts supply, to 58mV per Amp with a 12 Volt DC supply. This sensor comes with mounting screws which are 0.375 inch long 4-40 screw and square nut (included) . However you could solder three wires to the pins and put heat shrink around each of them and runs this sensor to wherever you want.

Manufacturer: Rigol Brand: Rigol Model: RA5040K

Rigol RA5040K 40 dB Attenuator Accessory for Oscilloscopes or Generators

Manufacturer: Aidbucks Brand: Aidbucks Model: PM8233B

Our suppliers have 16 years of experience in meter development and production, focusing on productingf high-quality and safe products. We also established a professional technical support team and after-sales service team, is committed to customer service purposes!Aidbucks PM8233B digital multimeter is designed to safely and accurately solve all kinds of automotive and household electrical problems. For household sockets, sockets, fuses, cabling, general purpose batteries, car batteries and charging systems, car circuits and so on. Specifications: Safety/Compliances: IEC61010 CAT II 600V, pollution degree 2,double insulation. DC Voltage: 200mV/2V/20V/200V ±(0.5%+2), 600V (0.8%+2) AC Voltage: 200V/600V ±(1.2%+10) DC Current: 200μA/2mA/20mA ±(1.0%+2), 200mA ±(1.5%+2); 10A ±(3%+2) Resistance: 200Ω/2KΩ/20KΩ/200KΩ±(0.8%+2; 2MΩ ±(1.0%+2) Fuse protection: F 250mA/250V 10A/250V Max Display: 2000 CountsBacklight: 10 minUpdate: 2-3/secOverrange indication: "1"Polarity display: Negative polarity display "-"Measuring method: Dual-slope integration A/D converterPower: 9V battery, NEDA 1604 or 6F22Low battery indication: √Over load protection: √Data hold: √No delay response: √Low battery indicator: √Continuous buzzer: √Overload protection: √General Specifications: Dimensions: 5.1" x 2.9" x 1.4" Power Supply: 1 x 9V 6F22Package Includes 1 x Digital Multimeter 1 x Test Leads (1 pair) 1 x English Manual1 x 9V 6F22 battery

Manufacturer: Fluke Corporation Brand: Fluke Model: AC72

The Fluke alligator clip-set of red and black clips have a pair of nickel plated jaws. The jaws have an 8mm (0.32") opening. Recommended for use with TL71 and TL75 test leads, they are CAT IV 600V, CAT III 1000V, 10A rated and UL listed. The over-molded surfaces and finger-hugging curves give the user a comfortable, reliable grip and improves steadiness in slippery hands. UL listed. The Fluke alligator clips are sold as one set per package.

Manufacturer: Extech Brand: Extech Model: TP882

Extech TP882 Type K High Temperature General Purpose Penetration Probe

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9082/001

One red (signal) and one black (ground) 4mm banana contact. Consists of two adapters. Maximum signal voltage: 600V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031. UL Listed.

Manufacturer: Efergy Brand: Efergy Color: White

Add this transmitter to your engage system to view multiple circuits. Ideal for installations that want to view solar and generation data separately or any home that needs to see the consumption of a different area separately

Manufacturer: Lenox Brand: Lenox Model: 30888VB11 Color: Multicolored

The Lenox 30888-VB11 Vari-Bit Step Drill Bit - 7/8" and 1-1/8" for 1/2" and 3/4" Conduit has a patented two flute design which cuts fast, clean, round holes that are accurate and burr-free. The enhanced flute design also removes chips rapidly to ensure longer tool life. The split point on the tip of the Vari-Bit is designed for faster penetration and prevents walking. The steam oxide coating adds to the durability of the Vari-Bit Step Drill Bit. Use of Lenox PROTOOL LUBE recommended to extend tool life. Step Sizes: 7/8" and 1-1/8" (for 1/2 and 3/4 conduit).

Manufacturer: Janisa Brand: Janisa

Overview: The MT100 is a automatically select measurement function and range digital clamp multimeter, which means that you just need to turn on the dial and it will show all the different measurement symbols you could want. It can reach 5999 counts , and has a maximum 600A AC current range and maximum work height is 2000m. So it will meet the needs of different applications easily. Besides , there are also functions like data-hold function, back Light, low battery display, auto power-off and the whole range of overload protection circuit, unique design makes it the superior performance of a dedicated electrical instruments. It can be used to measure the DC voltage, AC voltage, AC current, resistance, diodes, circuit continuity and so on.Specifications: DC Voltage range and accuracy: 0.5V-600V ±（0.5%reading+3）0-600V ±(0.5%+3) AC Voltage range and accuracy: 1V-600V±（0.8%reading+5） AC Current range and accuracy: 100mA-400A ±（2.5%reading+5) 400A-600A ±（3%reading+5) Resistance range and accuracy: 0Ω-10MΩ±（0.8%reading+3) Peak Point Current range and accuracy: 10A-900A ±(10%reading+3) Display: 5999 counts.  Auto range: √ Data hold: √ Back light: √ Diode test: √ Auto power off: √ Over load protection: √ Short circuit buzzer : √ Short circuit protection : √ General Specifications: Dimensions: 7.4*2.8*1.5 in Power: 2 x AAA Batteries (More economical for you,but Not included) Safety Rating: CE ETL CAT.Ⅲ 1000V Package List: 1* Digital Clamp Multimeter 1* Pair Test Leads 1* Operating Manual 1* Carry Case NOTES: SAFETY ALWAYS GOES FIRST WHEN YOU ARE WORKING

Manufacturer: ZIBOO Brand: ZIBOO Model: ZIBOO UT210D

Size name:ZIBOO UT210D Specifications: AC Current (A): 20A/200A ±（2.5%+8) DC Current (A): 20A/200A ±（2%+3) AC Voltage (V): 2V/20V200V/600V ±（1%+3) DC Voltage (V): 200mV/2V/20V200V/600V ±（0.7%+3) Resistance (Ω): 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ ±（1%+2) Frequency（Hz): 10Hz/100Hz/1kHz/10kHZ/60kHz ±（0.1%+4) Capacitance (F): 2nF/20nF/200nF/2μF/20μF/200μF/2mF/20mF ±（4%+5) Temperature（℃）: -40℃～1000℃ ±(1%+3) Temperature（℉）: -40℉～1832℉ ±(1.5%+5) General Characteristic: Power: AAA 1.5V × 2 LCD Size: 39.3mm × 26.5 mm Product Color: Red and Grey Product Net Weight: 170g Product Size: 175mm × 60mm × 33.5mm What's in the box: 1 * ZB-UT210D Clamp Meter 1 * ZB-UTL20 Test Lead 1 * Point Contact Temperature Probe 1 * English User Manual