Electrical Testing - Page 269

Manufacturer: Hioki Brand: Hioki Model: IR4017-20

Reliable and efficient insulation testing in the field. Single range testing voltage 500V, insulation meter up to 1000 Mega-Ohms. Built tough to withstand a 1-meter drop onto a concrete floor. Bright LED luminous scale. Check for live circuits and for the battery status. Hard case in a body, quick and easy storage without disconnecting the leads. Testing voltage: 500VDC. Rated Resistance: 1000 Mega-Ohm. Accuracy: +/-5 percent of indicated value 1 - 500 mega-Ohm. Lower limit resistance: 0.5 mega-ohm (measurement resistance value to be maintained testing voltage). Overload protection: 600 VAC (10 Sec). AC voltage measurement: 0 to 600V (50/60Hz), +/-5 percent of maximum scale value accuracy, 500 Kilo-ohm or more input resistance. Other functions: bright LED luminous cale, drop proof, battery check, live circuit check, auto discharge. Power supply: AA alkaline battery x 4, continuous use: 20 hours (at 500V range, no load). Measures 159mm width by 177mm height by 53mm depth. Supplied accessories: test lead L9787, Instruction Manual, LR6 (AA) alkaline batteries x 4, Shoulder strap.

Manufacturer: Accuenergy Brand: AcuDC 243 Color: None

The World’s only multifunction DC power meter with three-line LCD display, direct measure up to 1000V DC voltage, bi-directional current, power and energy measurement, Modbus RTU via RS485 communications and optional input/output. The AcuDC 243 is ideal for monitoring and controlling DC systems such as Solar, wind, cell tower, UPS, railway system and etc. All data can be read directly off the LCD display or via Modbus and can be used with Accuenergy’s free Acuview software. The AcuDC 243 is UL and CE certified, and comes with a class-leading five year warranty.

Manufacturer: Amprobe Brand: Amprobe Model: TX900

The Amprobe TX900 microwave leak detector measures radio frequency (RF) power leakage from microwave ovens in home, commercial, and industrial maintenance applications. The detector's eight dipole sensors detect plane wave signals of any polarization. The temperature compensation feature helps ensure that the ambient temperature of the testing area does not interfere with measurements. The unit automatically zeroes the display when it is powered on, helping to improve measurement accuracy. It has a 2-1/2 digit liquid crystal display (LCD) that shows readings both in digits and on a 10-segment bar graph. The unit comes with two glass beakers that, when filled with water, act as a load for the microwave during testing. A set of labels is included for marking the highest level of RF radiation detected during testing. A low-battery indicator signals when the meter's batteries need to be replaced. The unit comes with a hard plastic carrying case that helps protect the leak detector from damage during transportation and storage.SpecificationsOperating temperature0 to 50 degrees Celsius/32 to 122 degrees FahrenheitDetection range, radio frequency (RF) power0 to 10 milliwatts per centimeter squaredPower supply9V NEDA 1604A or IEC 6LR61 battery (one, included)Standards metEuropean Conformity (CE); Australia N10140Weight0.33 lb./0.15 kgDimensions9.1 x 1.7 x 1.7 inches/230 x 42 x 44 mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Leak detectors are used in mechanical, automotive, petrochemical, wastewater treatment, plumbing, electrical, and heating, ventilation, and air conditioning (HVAC) applications to locate the source of a leaking gas or liquid. Simple leak detectors use dyes, pH- or chemically reactive indicators, or a foaming substance to find leaks in pipes, tubes, fittings, tanks, and cylinders. More complex leak detectors have electronic sensors that measure the concent...

Manufacturer: Fluke Corporation Brand: Fluke Model: 4357406

The Fluke Flexible Current Probe is a 12" current probe that measures AC to 1,500 amp. This current probe is for use with the Fluke 1730 Three-Phase Energy Logger (sold separately) for conducting energy usage surveys. It measures AC to 1,500 amp to extend the range of the energy logger. The flexible probe is 12" long for coiling around a cable under test. The probe connects to the energy logger vial a 6' cord. It meets International Electrotechnical Commission (IEC) safety standard 61010-1, and is rated for CAT IV installations to 600V and CAT III installations to 1,000V. It comes in a set of three.SpecificationsRange1 to 150 amp AC / 10 to 1,500 amp ACAccuracy (with the 1730 Energy Logger)+ or - (1% of reading + 0.02% of range)Coil length12"Cable length2m/6.6'Installation ratingCAT IV, 600V; CAT III 1,000VStandards metEN safety standard 61010, CE marking, Canadian Standards Association, Australian EMCIngress protectionIP50Weight115gIndustrial power meters measure electrical properties such as voltage, current, power, and energy to monitor the efficiency and performance of a power system. They are used for designing, installing, and maintaining industrial, commercial, and residential power supply systems. More advanced models have features for comparing and recording multiple measurements taken at different times and in different areas.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: IDI Brand: IDGroup

Contact Probes HEADED 4-SIDE CHISEL

Manufacturer: B&K Precision Brand: B&K Precision Model: 600B Color: Blue/White

The 600B Battery Capacity Analyzer addresses the need to test and maintain sealed lead acid (SLA) batteries used in backup power UPS, emergency lighting, fire alarms, security systems, and many other electrical systems. By quickly characterizing a battery's response to a load resistance, the meter displays the remaining battery capacity as an indicator of the battery's health.

Manufacturer: Siglent Brand: Siglent Model: SDG1010

Specifications:• Highest frequency output:10MHz • Output channels: 2 • Sample rate:125MSa/s • Wave length:16Kpts • Frequency resolution:1μHz • Vertical resolution:14bits • Waveform:Sine wave,square wave,triangular wave,pulse wave white noise,48 types of function waveform. • Sine wave:1μHz~10MHz • Square wave:1μHz~10MHz • Pulse:500μHz~5MHz • Ramp:1μHz~300KHz • Gaussian white noise:>10MHz bandwidth(-3dB) • Wave:1μHz~5MHz • Modulation function:AM,DSB-AM,FM,PM,ASK,FSK,PWM ,SWEEP,BURST • Other function:Frequency counter: 100mHz~200MHz • Standard configuration:USB Host & Device • Optional port:USB-GPIB(IEEE-488) • SIZE:WxHxD=229mmx105mmx281mm Applications: 1. IC test 2. Analog sensor 3. Simulated environment signals Electrical circuit function test Education and training Standard Accessories: 1. A User Manual 2. A Certification 3. A Guaranty Card 4. A CD (including EasyWave 1.0 computer software system) 5. A Power Cord that fits the standard of destination country 6. A USB Cable 7. A Quick Start

Manufacturer: Radiall Brand: Radiall

Test Plugs & Test Jacks LC ADTR SM BEIGE/10

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

Memory Adapter for SECUTEST... and SECULIFE ST This memory adapter is intended for use with SECUTEST.../ SECULIFE ST  test instruments. Test reports and individual test steps and/or test series can be written ("printed") directly from the SECUTEST... test instrument to the memory adapter, and can be subsequently read out and processed at a PC. This memory adapter is thus especially well suited for archiving and transmitting test reports. Depending upon their scope, up to 1,000 test reports or test series can be saved to memory. Applications This memory adapter is intended for use with SECUTEST... test instruments. Test reports and individual test steps and/or test series can be written ("printed") directly from the SECUTEST... test instrument to the memory adapter, and can be subsequently read out and processed at a PC. This memory adapter is thus especially well suited for archiving and transmitting test reports. Depending upon their scope, up to 1,000 test reports or test series can be saved to memory. Please note that the direct print-out option must be enabled in order to save individual test steps or test series to your SECUTEST...

Manufacturer: REK Brand: REK Model: MOS620CH

Vertical Axis Sensitivity: 5mV~5V/DIV, 10 steps in 1-2-5 sequence Vernier Vertical Sensitivity:To 1/2.5 or less of panel-indicated value. Frequency bandwidth: DC~20MHz & DC~40MHz AC coupling:Low limit frequency 10Hz. Rise time:Approx. 17.5nS for 20MHz Approx. 8.75nS for 40MHz Input impedance: Approx. 1M ohm//Approx.25pF DC balance shift: Adjustable on panel Linearity: ≤ ±0.1 DIV of amplitude change when waveform of 2 DIV at graticule center is moved vertically. Vertical modes:CH1:CH1 single channel.CH2: CH2 single channel. DUAL:CH1 and CH2 are displayed. ALT or CHOP selectable at any sweep rate. ADD:CH1+CH2 algebraic addition. Chopping repetition frequency:Approx. 250KHz Input coupling:AC, GND, DC Maximum input voltage:400V (DC+AC peak), AC: frequency 1KHz or lower. When set probe switch at 1:1, the maximum effective readout is 40V pp Or set prove switch at 10:1, the maximum effective readout is 400 V pp Common mode rejection ratio: 50:1 better at 50KHz sinusoidal wave. Isolation between channels: (At 5m V/DIV range) >1000:1 at 50 KHz >30:1 at 15 KHz >30:1 at 35 KHz CH2 INV BAL:Balanced point variation: ¡Ü1 DIV (Reference at center graticule) Triggering Source CH1, CH2, LINE, EXT(CH1and CH2 can be selected only when the vertical mode is DUAL or ADD). In ALT mode, if the TRIG.ALT switch is pushed in, it can be used for alternate triggering of two different sources. Coupling:AC: 20Hz to full bandwidth Slope:+/- Sensitivity:20Hz~2MHz: 0.5DIV, TRIG-ALT:2 DIV,EXT:200mV 2-20MHz:1.5DIV TRIG-ALT:3 DIV, EXT:800mV TV:Sync Pulse more than1 DIV(EXT:1V) Triggering Modes AUTO: Sweeps run in the free mode when no triggering input signal is applied. TV-V: This setting is used when observing the entire vertical picture of television signal. TV-H: This setting id used when observing the entire horizontal picture of television signal. EXT triggering signal input Input impedance Max. Input Voltage Approx: 1M ohm//Approx. 25 pF 400V AC: Frequency not higher than 1KHz.