|
|
-
4.6 of 5.0 with 41 Reviews
SALE PRICE: $396.21 1% OFF
Manufacturer: TENMA
Brand: Tenma
Model: 72-10165-TENMA
Manufacturer: TENMA
Brand: Tenma
Model: 72-10165-TENMA
Bandwidth: 100MHz. Bandwidth: 100MHz. Input Impedance: 1Mohm. Input Impedance: 1Mohm. Meter Display Type: -. Meter Display Type: -. Plug Type: -. Plug Type: -. Rise Time: 3. 5ns. Rise Time: 3. 5ns. SVHC: To Be Advised. Sampling Rate: 250MSPS. Sampling Rate: 250MSPS. Scope Channels: 2 Analogue. Scope Channels: 2 Analogue. Scope Type: PC Based. Scope Type: PC Based. Series: -. Series: (Not Ava
-
4.6 of 5.0 with 17 Reviews
SALE PRICE: $396.50 1% OFF
Manufacturer: IDI
Brand: IDGroup
Manufacturer: IDI
Brand: IDGroup
Contact Probes BECU PLUNGER RND TIP
-
4.6 of 5.0 with 43 Reviews
SALE PRICE: $397.65 1% OFF
Manufacturer: Silvertronic
Brand: Silvertronic
Manufacturer: Silvertronic
Brand: Silvertronic
Test Clips COPPER PLATE 200AMP BU-41A-2
-
4.6 of 5.0 with 50 Reviews
SALE PRICE: $399.00
Manufacturer: Rigol
Brand: Rigol
Model: DS1054Z
Color: Grey
Manufacturer: Rigol
Brand: Rigol
Model: DS1054Z
Color: Grey
|
Rigol DS1054Z    Best Selling Oscilloscope Find out with the DS1054Z is one of the top selling oscilloscopes in the WORLD since its release in September 2014. Read the reviews! Let our customers tell you what they think of this unit. Schools love them, companies love them, students and home hobbyist love the DS1054Z. Backed by a 30 day money back guarantee you cannot go wrong with this unit. DS1054Z Features 50 MHz Analog Bandwidth Total of 4 Analog Channels Maximum Waveform Capture Rate of up to 30,000 wfms/s Includes 4 RP2200 150 MHz Passive HighZ Probes Low noise floor USB Host for Thumb Drive Large 7" Display 12 Mpts of Memory - upgradeable to 24   Customer Feedback "I have used the scope for basic measurements so far, mostly audio signals and comparisons of such signals. It works well and the construction is as good as that of expensive top-brand items. The packaging was adequate and protects the instrument well. RIGOL has tried hard to pass themselves as a decent company to buy equipment from and they have succeeded, at least with this scope. I have used lots of lab equipment for many years in college labs and this would fit perfectly in every lab, given its low price, specifications and support. Highly recommended for tight budgets and high expectations" Customer Submitted Image UltraVision Rigol's innovative UltraVision technology provides a deeper memory depth of 12Mpts standard and is upgradeable to 24 Mpts (with purchase of MEM-DS1000Z). The DS1054z also provides the ability to quickly focus in on certain piece of a recorded waveform. UltraVision × Full Visibility × Full Visibility The large 7" display of the DS1054z, with a resolution of 800 X 480 pixels makes it possible to view all channels on a single screen. This makes for better usability and more efficient analysis
-
4.6 of 5.0 with 40 Reviews
SALE PRICE: $399.00
Manufacturer: Psiber Data Systems
Brand: Psiber Data Systems
Model: LMK3515
Manufacturer: Psiber Data Systems
Brand: Psiber Data Systems
Model: LMK3515
The LanMaster 35 is a new handheld tester used for installing and maintaining Local Area Networks (LAN) using Power over Ethernet (PoE). The LanMaster 35 Power and Link Tester conducts power tests with actual loads to ensure that when a powered device such as a VoIP phone, wireless access point or security camera is connected to the network it will operate properly.
-
4.6 of 5.0 with 3 Reviews
SALE PRICE: $399.02
Manufacturer: GW Instek
Brand: GW Instek
Model: GOS-620
Manufacturer: GW Instek
Brand: GW Instek
Model: GOS-620
|
The Instek GOS-620 is a 20 MHz, two-channel analog oscilloscope with ALT triggering, Z-axis input, TV synchronization capability, and channel 1 output for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. This oscilloscope has a vertical sensitivity to 1mV per division for capturing low-level signals. An ALT triggering function displays the signal from both channels simultaneously and a Z-axis input modulates the intensity of the waveform. The TV synchronization circuit allows triggering of TV-V and TV-H signals and the channel 1 output can apply a signal to an external device, such as a frequency counter (sold separately). Sweep speed can be magnified by 10 to increase the number of sweeps shown on the display. Additional specifications include a rise time of 17.5 ns (50 ns at 5X magnification) and various triggering features. The oscilloscope has a 6" CRT (cathode ray tube) display with an internal 8 x 10 division grid (each division is 1 cm) for viewing waveforms. It has European Conformity (CE) marking. It comes with two 20 MHz passive voltage probes; a power cord for 115/230VAC, 50/60 Hz; and instructions. SpecificationsDisplay6" CRT (cathode ray tube)Bandwidth20 MHzChannelsTwoSweep speed0.2 μs to 0.5 s per division; 100 ns to 50 ms per division (at 10X magnification)Power source115/230VAC, 50/60 HzDimensions (H x W x D)150 x 310 x 455 mmWeight8 kgH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Oscilloscopes are electrical testing devices used to verify the functionality of equipment that generates an electrical signal. Oscilloscopes measure the voltage of an electrical signal over time, and display the measurement as a waveform in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and the time on a horizontal (X) axis. Details of a waveform dem...
-
4.6 of 5.0 with 22 Reviews
SALE PRICE: $399.55
Manufacturer: Hioki
Brand: Hioki
Model: FT6031-03
Manufacturer: Hioki
Brand: Hioki
Model: FT6031-03
Earthing or grounding of electrical equipment is essential to maintain safety, protecting lives, as well as prevent damage to equipment. The FT6031-03 is a IP67 dustproof and waterproof two- or three-pole earth resistance tester with large, easy-to-read display, highly sensitive earthing rods, and innovative cable winder that significantly reduces the amount of time needed to complete earth resistance tests.
-
4.6 of 5.0 with 108 Reviews
SALE PRICE: $399.99
Manufacturer: Rigol
Brand: Rigol
Model: DS1102E
Color: White
Manufacturer: Rigol
Brand: Rigol
Model: DS1102E
Color: White
This Rigol DS1102E Model is economical digital oscilloscope with high-performance, which is designed with dual channels and 1 external trigger channel. It provides 20 types of wave parameters for automatically measuring, which contains 10 Voltage and 10 Time parameters. In cursor mode, users can easily measure by moving cursor. Besides, 3 types of cursor measurement are optional: Manual, Track and Auto. This DS1102E DSO provides powerful PC application software: UltraScope, which enables to: Capture and measure wave; Perform local or remote operation; Save waves as ".bmp" format; Save files as ".txt" or ".xls" format; Print waveforms.
-
4.6 of 5.0 with 5 Reviews
SALE PRICE: $404.52 5% OFF
Manufacturer: LeCroy Corporation
Brand: LeCroy
Model: WSXS-SPIBUS TD
Manufacturer: LeCroy Corporation
Brand: LeCroy
Model: WSXS-SPIBUS TD
|
Advanced software algorithms deconstruct the waveform into protocol information, then overlay the decoded data on the waveform. Decode information condenses or expands depending on the timebase/zoom ratio setting, so understanding messages is easy. Various sections of the protocol are color-coded to make it easy to understand, especially for users new to SPI serial data. The decode operation is fast-even with long acquisitions. The user can choose to decode into hex, binary, or ASCII formats. Completely isolate specific SPI message events for better understanding and debug. Use a conditional DATA trigger to select a range of DATA values to trigger on, not just a single DATA value. Oftentimes, I2C utilizes DATA bytes to specify sub-addresses for accessing memory locations in EEPROMs. Conditional DATA trigger allows triggering on a range of DATA bytes that correspond to reads or writes to specific sub-address memory blocks in the EEPROM. Of course, all the basic SPI triggering capability you would expect is also included. The SPI trigger can be configured for a range of CPOL and CPHA settings as well as the Simplified SPI protocol. Turn your oscilloscope into a protocol analyzer with the Table display of protocol information. Custom configure the Table to display only the information you want, and export Table data to an Excel file. Touch a message in the table and automatically zoom for detail. In all cases, the Table never obscures your waveform data. SPI messages can be quickly located by searching on DATA. Pressing an arrow button advances the single zoomed message view one message to the right or left of the current message. Compatible with TD (Trigger and Decode) Option compatible with all WaveMaster 8 Zi/Zi-A, WavePro 7 Zi/Zi-A, WaveRunner 6 Zi, WaveRunner Xi and WaveSurfer Xs. D (Decode) Option fully compatible with WaveRunner 6000, WavePro 7000, and WaveMaster 8000 Series.
-
4.6 of 5.0 with 37 Reviews
SALE PRICE: $404.60 1% OFF
Manufacturer: Extreme Network
Brand: Extreme Network
Manufacturer: Extreme Network
Brand: Extreme Network
Extreme Networks will provide 24 x 7 x 365 access to TAC and software support. Extremes multilingual TAC team provides personalized assistance via phone, web or e-mail to quickly resolve any networking questions or issues. To ensure Extremes perception of the problem is in-line with yours and to ensure that the problem resolution meets your expectations, the customer determines the priority of a reported problem.
|
|