Electrical Testing - Page 272

Manufacturer: AEMC Brand: aemc Model: 601

The TRMS Clamp-on Meter Model 601 provides a new standard for safety and measurement capability not available in any other clamp meter sold today. Safety Rated at 1000V CAT IV, it is safe to operate in all electrical environments. It is rugged enough for the most demanding work environments and will withstand both dust and water spray with its IP54 rating. It is ergonomically designed and easily used by one hand, including function selection and button pushing even with a glove on. In addition to the standard measurement of volts, amps, frequency, resistance, diode checking and continuity, the Model 601 offers several unequaled functions including: True InRush , Temperature measurement and more. Features: 1000V CAT IV Rated UL 94 flame retardant self-extinguishing IP54 Rated 10,000-count blue electroluminescent backlit display Measures up to 2000VAC (1400V peak), 1000VDC and AC+DC with resolution to 10mV Measures up to 1000AAC Tracks Min/Max and peak values Measures frequency to 20kHz with 0.1Hz Measures temperature in F or C using a K-type Thermocouple True InRush current measurement with 1mS capture Jaw opening up to 2.36 Leads are constructed with a flexible silicone material Applications: General purpose electrical troubleshooting Motor start up analysis Voltage troubleshooting Bond and continuity checking Temperature analysis

Manufacturer: Promax Brand: Promax Model: MZ-505C

The L/C/R MZ-505C handheld meter displays values up to 19,999 counts using 41/2 digits and it is controlled by a special microprocessor, which measures inductance, capacitance and esistance. It is easy to use and it allows measuring in parallel and serial mode. It takes direct and accurate measures of coils, capacitors and resistors at different frequencies. It allows selecting measure ranges in manual or automatic way. The front panel keys provide maximum comfort when selecting functions and features like read-memory; maximum value log, minimum and average; relative measures; tolerance for components classification; frequency and L/C/R selection. Results of measures are displayed in a (dual) backlit screen and they can be transferred to a PC by means of an opto-coupled standard RS-232 interface. A tilted support makes easy to view and work with it. A rubber holster, made to protect the instrument from unexpected shocks, covers the MZ-505C giving it mechanical protection. To operate its required a 9 V battery and also it can work with a 12 V power adaptor.

Manufacturer: Hantek Brand: Hantek HDG2022B

Specifications: 1.Main Features •Model:HDG2022B •Channel:2 •Waveform Length:64M •Bandwidth:20MHz •Frequency:1μHz-20MHz •Sample Rate:250MSa/s •Voltage Resolution:16Bit •Digital Output Mode:16 Channels 2.Frequency Characteristics •Waveform:Sine,Square,Ramp,Pulse,Noise,Sinc,Exponential Fall,ECG,Gauss,Haver Sine, Lorentz,Dual-Tone,DC •Sine:1μHz-20MHz •Square: 1μHz-20MHz •Pulse: 1μHz-20MHz •Ramp: 1μHz-2MHz •White Noise:20Mhz •Harmonic/Arbitray: 1μHz-20MHz •Resolution: 1μHz •Accuracy:±2ppm,18℃-28℃ 3.Square •Rise/Fall time(Typical):＜16ns •Overshoot:Typical Value(100KHz,1Vpp)＜3% •Duty Cycel:≤10MHz:20.0%-80.0%;10MHz-40MHz:40.0%-60.0%;＞40MH:50.0%(fixed) •Non-symmetry:1% of period+5ns 4.Ramp •Linearity:≤1%(Typical,1kHz,1VPP,Symmetry 100%) •Symmetry:0%-100% 5.Pulse •Period:200ns-1millons •Pulse:≥16ns •Leading/Trailing Edge Time: 11ns •Overshoot:Typical (1Vpp)＜3% 6.Amplitude Characteristic •Amplitude Range:≤20MHz:1mVpp-20Vpp; ≤60MHz:1mVpp-15Vpp; ≤80MHz:1mVpp-10Vpp ;≤90MHz:1mVpp-5Vpp; ≤10MHz:1mVpp-2Vpp •Resolution:1mv or 4 digits •Isolation:＜-80dB •Impedance:50Ω(Typical) 7.Modulation Characteristic: Support AM,FM,PM,ASK,FSK,PSK and PWM modulations 8.Burst Characteristic •Burst Count:200000000 •Gated Source:External Trigger •Trigger Source:Internal External or Manual 9.Sweep Characteristic •Direction:Up •Type:Linear •Sweep/Hold/Return Time:280000s

Manufacturer: Radiall Brand: Radiall

Test Plugs & Test Jacks BANANA U-LINK YELLOW 2000V 7A

Manufacturer: Compliance West Brand: Compliance West

HTT-1R HimA, Function Checker, Ground (Pass 0.025 Fail 0.1 ohm) Leakage (Pass 424k Fail 200kohm) Arcover 750V ± 400V. The HTT-1R was designed to provide a fast, safe and reliable way to verify proper operation of Dielectric Withstand (hipot) and Ground Bond Testers between calibration cycles, using actual component values which mimic the product being tested. It provides a stringent periodic check of your production line hipot and ground bond testers as required by TUV and others. The HTT-1R functions like our successful HTT-1 tester, but goes a step further by providing component values as the test loads, instead of opens and shorts provided by the HTT-1. By choosing one of our standard configurations conforming to your testing parameters (or custom parameters based on your requirements), the hipot and ground bond tester in use are checked by realistic component values which mimic the characteristics of your production items. The HTT-1R verifies the result of the three failure modes encountered in production hipot and ground circuit testing (open ground, high leakage current, and dielectric breakdown) separately or in any combination to verify proper test equipment operation. A passing test can also be simulated. The HTT-1R is designed to test up to 30A ground bond testers using these values to simulate actual operation. Connections to the Ground Bond Tester will add approximately 0.03Ω to these values.

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N2876A

The N2876A passive probe offers DC to 1.5 GHz and 100:1 attenuation factor to measure fast edges in high speed applications more accurately. This probe needs 50 ? input on the oscilloscope. Compact 2.5-mm probe head diameter, low input capacitance, and various fine-pitch probe tip accessories make the Keysight N2870A Series passive probes ideal for probing densely populated IC components or surface-mount devices used in today's high-speed digital applications. The sharp probe tip is spring loaded to help engineers keep the probe from slipping off the device under test. Insulating IC caps keep the small probe tip centered on the IC lead and keep it from shorting adjacent leads. Standard flat blade ground connector and self-adhesive copper ground pad help reduce ground inductance while offering easy ground access. Optional probe tip accessories provide specialized capabilities for demanding applications. Compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 50 ? input. Recommended for measuring 50 ? transmission line or signals with low source impedance (

Manufacturer: Tlegend Instrument Brand: Tlegend Instrument Model: TU-6D

Welcome to Tlegend Instrument®-----A Professional Instrument Store. Professional Product: Light source wavelength:470nm Dimensions:440×75×51（mm） Input power:AC110-220V，50/60Hz UV window:150x50mm Power:≤6W Weight:1100g Matters needing attention: 1, UV filter cannot and metal objects magnetic eraser, not force, the surface should be kept clean and dry, each time after use to wipe with a clean gauze to wipe. 2, ultraviolet radiation on the human body is harmful, so do not use the device when the UV lamp is closed, in the use of as much as possible not to the human (TU-6D no harm to the human body, use more secure). Professional Service: The product usually takes 7--13 business days to reach you after your order is confirmed. We ship the product by FedEx IE or Yanwen Express lanes. As your satisfaction is our utmost priority,we will endeavor to solve all of your problems until you are satisfied. Click "Add to Cart" to buy now!

Manufacturer: Mueller Electric Brand: Mueller Electric

Test Plugs & Test Jacks RED SPADE JACK

Manufacturer: AEMC Brand: AEMC Model: HX0034

The accessory is a current clamp using a Hall-effect cell to measure DC or AC currents up to 80A peak, without any intervention on the electrical installation (cutting off the current to be measured). A voltage output transducer, this clamp is a "PLUG and PLAY" element. Its internal electronics are powered by the oscilloscope.

Manufacturer: withUtrade Brand: Hantek DSO3062AL

Features Five-in-one PC Based Laboratories: Oscilloscope/Arbitrary Waveform Generator/Logic Analyzer/Spectrum Analysis/Frequency Counter Oscilloscope: 2 Channel and EXT trigger, 60MHz Bandwidth. 200MSa/s real-time sampling rate, 10k-16M memory depth per channel. Arbitrary Waveform Generator: 25MHz arbitrary waveform output, (sine wave can deliver up to 75MHz) 200MSa/s DDS, 12bits of vertical resolution. Frequency Counter, FFT spectrum analysis. 8--36V Wide range of input voltage, suitable for vehicle power test. USB 2.0 interface, LAN optional. More than 20 kinds of automatic measurement function, PASS/FAIL Check function, is suitable for engineering application. Excellent industrial design, similar interface with bench oscilloscope, easy to use. Software support: Windows NT, Windows 2000, Windows XP, VISTA, Win 7, Win 8. Supply DEMO code (VC, VB, LABVIEW) and technical support.