|
|
-
4.6 of 5.0 with 30 Reviews
SALE PRICE: $500.00
Manufacturer: DENT Instruments
Brand: DENT Instruments
Model: EXC-W-INT
Manufacturer: DENT Instruments
Brand: DENT Instruments
Model: EXC-W-INT
This product is a weather right drop-in enclosure for use in harsh environments. (International Version).
-
4.6 of 5.0 with 18 Reviews
SALE PRICE: $506.26 67% OFF
Manufacturer: Fluke
Brand: Fluke
Model: 4352349
Color: Yellow/Brown/Silver
Manufacturer: Fluke
Brand: Fluke
Model: 4352349
Color: Yellow/Brown/Silver
The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure. Modules are calibrated independently of the calibrator, and can be used with any 740, 750 or compatible 720 or 710 series calibrator.
-
4.6 of 5.0 with 47 Reviews
SALE PRICE: $520.00 1% OFF
Manufacturer: AEMC
Brand: AEMC
Model: JM861
Manufacturer: AEMC
Brand: AEMC
Model: JM861
|
The model JM861 is designed for oscilloscopes, waveform displaying instruments and other instruments able to benefit from its frequency response. The model JM861 encompasses a special circuit and three ranges to maximize frequency response performance. Accurately measures AC current waveforms and has proportional mV output for direct readings on oscilloscopes. Three-position slide switch on the handle selects ranges. Large jaw window enables use on cables and bus bars. Nominal range: 30A, 300A, 3000A. Output: 10mA/AAC, 1mV/AAC, 0.1mA/AAC. Oscilloscope current probe for applications in industrial and power environments. Analyze, measure and accurately display distorted current waveforms and harmonics. Current range from 1 to 2400A RMS, large jaw window for use on cables and bus bars. Direct BNC connection to scope. Applications: electrical utility, HVAC, industrial maintenance, laboratory, plant maintenance, power quality. Double Insulation amd CE mark.
-
4.6 of 5.0 with 11 Reviews
SALE PRICE: $525.00
Manufacturer: HP Agilent
Brand: Agilent/HP
Model: 70100A
Manufacturer: HP Agilent
Brand: Agilent/HP
Model: 70100A
HP 70100A Power Meter Manufacturer: Hewlett Packard Model: 70100A Features:100 kHz to 50 GHz Single-channel 1/8th rack-width -70 dBm to +44 dBm Automatic calibration and zeroing Selectable resolution to 0.001 dB HP-IBFull-feature module for the HP 70000 modular system The same flexible feature set and the same accuracy as the HP 437B in only half the rack space Also fully compatible with the HP 8480 series of power sensors l
-
4.6 of 5.0 with 40 Reviews
SALE PRICE: $525.00 1% OFF
Manufacturer: Gossen Metrawatt
Brand: GOSSEN METRAWATT
Manufacturer: Gossen Metrawatt
Brand: GOSSEN METRAWATT
4½ Place TRMS Digital Multimeter for Industrial Use, e.g. in Chemical Process Engineering, Resolution: 12,000 Digits - 20 Multimeter Functions.
-
4.6 of 5.0 with 18 Reviews
SALE PRICE: $525.83
Manufacturer: Instek
Brand: GW Instek
Model: GTP-300
Manufacturer: Instek
Brand: GW Instek
Model: GTP-300
DC test probe kit for GSP series spectrum analyzer.
-
4.6 of 5.0 with 20 Reviews
SALE PRICE: $525.89
Manufacturer: Agilent Technologies
Brand: Agilent Technologies
Manufacturer: Agilent Technologies
Brand: Agilent Technologies
Agilent LiChrospher 100CN, 5um, 4x4mm - BC
-
4.6 of 5.0 with 9 Reviews
SALE PRICE: $529.00 1% OFF
Manufacturer: Extech
Brand: Extech
Model: 380562
Manufacturer: Extech
Brand: Extech
Model: 380562
|
View larger 220V High Resolution Precision Milliohm Meter Compact and precise, the Extech 380560 Milliohm Meter has 7 ranges and measures down to 0.1 milliohms using 4-wire Kelvin clip test leads. Measurements are displayed on the unit's large 0.8-inch, 1999-count LCD. Other Features Automatic zero, 5V test voltage, and a built-in comparator for Hi/Lo/Go resistance testing or selection. Operates on 220 VAC and comes complete with 4-wire cables with Kelvin clip connectors. What is a MilliOhm? The units of measure for resistances less than 1 Ohm (Ω) are Milli- (mΩ) and Micro-(μΩ)Ohms. One MilliOhm (1mΩ) is equal to one thousandth of an ohm (0.001). One MicroOhm (1μΩ) is equal to one millionth of an ohm (0.000001). For example, 0.5 ohms (one half an ohm) is equal to 500mΩ. Why bother measuring resistances so low? It may seem like too small a resistance to be of any consequence but many safety standards (UL, CSA, VDE, etc.) require that such resistances be measured during the manufacture of consumer products, hand tools, and many appliances. A good example is the testing of kitchen appliances. Why are 4-wire connections required when making milliohm measurements? Test leads always introduce a small amount of additional resistance into a measurement. This is acceptable in non-critical measurements such as megohm resistances. However, when measuring milliohms in a critical application, any additional resistance can render the measurement useless. This is why 4-wire (Kelvin) connections are imperative. More Extech Instruments to Choose From View larger 380560 High Resolution Precision Milliohm Meter Benchtop Milliohm Meter has 7 ranges and measures down to 0.01 milliohms. Measurements are displayed on a 1999 count display with 0.8-inch digits. Additional features include: automatic zero, 5V test voltage, and a built-in comparator for Hi/Lo/Go resistance testing or selection. Operates on 110VAC and comes complete with 4-wire cables with Kelvin cli...
-
4.6 of 5.0 with 18 Reviews
SALE PRICE: $535.00
Manufacturer: Megger
Brand: Megger
Model: 242006-18
Manufacturer: Megger
Brand: Megger
Model: 242006-18
|
The Megger 242006 series duplex test lead with Kelvin clip is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measure both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. The Kelvin clip directs current through one jaw and potential through other jaw when taking resistance measurements on cables and small wires. It has a 1.5" (4 cm) jaw opening.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headqua...
-
4.6 of 5.0 with 9 Reviews
SALE PRICE: $539.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 700G/TRACK
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 700G/TRACK
Software for the 700G Pressure Test Gauges. Manage your instruments and calibration data with this easy-to-use software. For use with 700G Series gauges to perform real time data logging. Enables data download and logging configurations to the 700G Series gauges for a remote logging event. Configure logging event reading rate, duration and measurement units. Upload measurements logged remotely and display or export measurements. Includes communication cable for connection to a PC and CD-Rom user manual.
|
|