Electrical Testing - Page 278

Manufacturer: Hioki Brand: Hioki Model: 9203

Digital printer provides conventional printing of measurement values and decision results, and also a range of statistical and graphing functions, including maximum value, minimum value, average value, standard deviation, histograms, and process productivity index. Printing of process productivity index (Cp: dispersion, CpK: bias) for production line productivity management. Graph printing function for at-a-glance grasp of measurement changes. Data handing capacity: 99,999 values (maximum 5,000 for histogram and graph printing). Thermal printer for high-speed output. Thermal line printer. Lifetime : At least 2 million lines. Print medium : 9233 recording paper, 58mm × 10m (approximately 3000 lines equivalent). Clock : Real time or elapsed time printing (data printed). Maximum number of printed values : 1 to 99,999. Printed data selection : ALL, IN, HL, VAL (valid data only), OFF. Decision result codes : Hi, IN, Lo, OF, NG. Printing interval : manu/auto. Data handing capacity : 99,999 values. Functions computed : number of values, maximum, minimum, and average values, standard deviation, process productivity index, bias (upper and lower limit settings). Histogram printing: Data handing capacity : 5,000 values (if more than 5,000 present, most recent 5,000 values are used). Withstand voltage : Body to power supply 1.5 kV AC (current sensitivity 20 mA). Insulation resistance : Body to power supply at least 100 Mohm. Operating temperature and humidity range : 0 to 40 degree C, 80 percent R.H. maximum (no condensation). Power supply : 100 to 240 V AC(+/-10 percent, 250V max.), 50/60 Hz. power consumption: 30 VA max. Compatible models: 3227, 3540, 3560, 3550, 3551. Interface: Input: start or stop signal, Output: trigger or error signal, data/centronics. Accessories: Recording paper (1 roll), Power cord (1), Fuse (1), Connection Leads (2). Measures 8-29/64" width by 6-19/6" height by 2-1/8" depth. 1 Year warranty.

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent Hypersil BDS-C18, 5um, 2.0 x 125mm cart - BC

Manufacturer: Hantek Brand: Hantek DSO1202BV

Specifications: ●Model:DSO1202BV ●Bandwidth:200MHz ●Channel:2 ●Real-Sample Rate:1GSa/s ●Equivalent Sample Rate:25GSa/s ●Record Length:1M ●Rish time:≤1.7ns/≤3.5ns/≤5.8ns ●Timebase Accuracy:±50ppm ●Time Base Range:2ns/div-40s/div / 4ns/div-40s/div / 4ns/div-40s/div ●Video Help:Yes ●SD Card:2GB ●Input Impandance:1MΩ ●VOLTS/DIV Range:2mV/div～5V/div ●A/D Converter:8bit ●Position Range:±50V(5V/div),±40V(2V/div～500mV/div),±2V(200mV/div～50mV/div),±400mV(20mV/div～2mV/div) ●DC Gain Accuracy: ±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div ●Bandwidth Limit:20MHz ●Trigger Types:Edge, Video,Pulse,Slope,Over time, Alternative ●Trigger Source:CH1,CH2 ●Math:+,-,x,÷,FFT, Invert ●Cursor Measurement: Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT); ●Auto Measuerment:Frequency,Period, Mean,Pk-Pk,Cycli RMS,Minimum, Maximum,Rise time,Fall Time,+Pulse Width,-Pulse Width,Delay1-2Rise,Delay1-2Fall,+Duty,-Duty,Vbase,Vtop,Vmid, Vamp,Overshoot,Preshoot,Preiod Mean, Preiod RMS,FOVShoot,RPREShoot, BWIDTH,FRF,FFR,LRR,LRF,LFR,LFF ●DMM Max.Resolution:6,000 Counts ●Testing Modes:Voltage,Current, Resistance,Capacitance,Diode & Continuity ●Max.Input Voltage:AC: 600V,DC: 800V ●Max. Input Current:AC:10A ,DC: 10A ●Max.Input Impandance:10MΩ ●Display:5.6"TFT 16K Color Display, 640*480 dots ●Size:245mm x 163mm x 52mm ●Weight:1.3KG(Without Package) ●Standard Probe:PP200x2

Manufacturer: Fluke Networks Brand: Fluke Networks Model: TS100-PRO-BT-TDR

FLUKE NETWORKS TS100-PRO-BT-TDR CABLE FAULT FINDER TDR KIT, BRIDGETAP DETECTION

Manufacturer: Megger Brand: Megger Model: 242041-18

The Megger 242041 series current test lead set includes one red and one black test lead with terminal clips for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. When used with compatible potential leads, the Megger 242041 series current test lead set allows the operator to take four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The leads have a maximum test current input of 10 amp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardizatio...

Manufacturer: Megger Brand: Megger

Developed, after extensive customer research, specifically to meet the needs of today's electrical contractors, the new MIT300 range of insulation and continuity testers from Megger is not only durable and easy to use, but also incorporates a comprehensive set of features designed to ensure operator safety, even under conditions of accidental misuse. The range includes four models, ensuring an exact match for the needs of every user, all of which offer automatic discharge of the circuit after testing, audible and visual warning if the test probes are applied to a live circuit, and a test inhibit feature which operates automatically under live circuit conditions. The units also conform fully to IEC 61010-1 for use in Category III 600V applications, and provide all of the facilities needed to meet insulation testing requirements relating to the current edition of the IEE Wiring Regulations.

Manufacturer: Hioki Brand: Hioki

DC Milliohm Hi-Tester The Resistance Meters RM3544/RM3544-01/RM3548 can measure the winding resistance of devices such as motors and transformers, the contact resistance of power contacts (relays and switches), and the DC resistance of fuses, resistors, and substrates such as conductive rubber and sheets. It does so quickly and at a high level of precision using four-terminal measurement. The RM3544/RM3544-01 is well suited to use for adjustment and testing on production lines as well as acceptance inspections, while the RM3548 comprises a portable solution for measuring resistance values ranging in magnitude from microohms to megohms, making it ideal for use in production, maintenance, repair and operation of large equipment High-precision specs in a compact package Convenient range options Measure from 0.000 mΩ to 3.5000 MΩ1µΩ max. resolution, 0.02% basic accuracy Max. measurable current of 300mA As inverter-equipped power supply equipment uses increasingly high currents and frequencies, increasingly low-resistance and low-loss inductors are being used in their circuitry, prompting a need for the ability to measure lower resistance levels with a high level of stability. With a resolution of 1 μΩ, the RM3544/RM3544-01 satisfies these needs. Electronic components make extensive use of high-resistance substrates such as conductive sheets and rubber, and the RM3544/RM3544-01 delivers the ability to measure up to 3.5 MΩ. Moreover, the instrument's maximum resolution of 0.02% allows it to be used in testing current detectors with a precision of 0.1%. No warmup period or zero adjustment The RM3544/RM3544-01 has no warmup time, meaning it's ready to use for measurement as soon as you turn it on. Accuracy is guaranteed immediately after the instrument is powered up (assuming temperature and humidity conditions that satisfy the accuracy guarantee conditions)

Manufacturer: Gigahertz Solutions Brand: GIGAHERTZ SOLUTIONS

The HF58 is a low cost and professional high frequency broadband measurement technology. Its functions and features are tailored to the needs and practical experiences of the building biology. More Features: -A quantitative differentiation between pulsed and un-pulsed radiation - a unique feature within the broadband measuring technology (based on our patent DE10317805) -A NiMH battery, a battery charger and a power supply unit inclusive -An AC- and a DC-output (AC: demodulated signal) -LEDs monitoring the function of the antenna -Sensor:Optimised logarithmic periodic antenna: Less ripple, better directionality, improved shielding vs. ground -Audio Analysis: Identification of pulsed radiation sources (mobile radio (GSM, UMTS/G3), cordless telephones (DECT), WLAN (Bluetooth), air-traffic control-radar) by means of an acoustic signal proportional to the modulation frequency -Signal Rating: Display of peak value, peak hold as well as average value (switchable) A quantitative differentiation between pulsed and un-pulsed radiation - a unique feature within the broadband measuring technology

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: U1453A

The U1451A insulation resistance tester from the U1450A series is ideal for predictive and preventive maintenance measurement tasks in electrical and industrial applications. With its vast measurement capabilities, efficient automated report generation and high durability, you can accomplish more in a day's work.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-709

The Fluke 709 Precision Loop Calibrator and 709H Precision HART Loop Calibrator (the Product or the Calibrator) can be used for installation, calibration, and troubleshooting of field transmitters, valves, and other control system components at process plants. Primary functions are source and measure mA signals in the 0 mA to 24 mA range. The Product can measure 0 V to 30 V and produce 24 V dc loop power.