Electrical Testing - Page 289

Manufacturer: Velleman Brand: Velleman Model: PROBE150

VELLEMAN PROBE150 OSCILLOSCOPE PROBE 150MHz. Complete probe set, for measurements up to 150MHz.

Manufacturer: Greenlee Brand: Greenlee Model: GT-12A Color: N/A

The Greenlee GT-12A voltage detector is intended to check for the presence of AC voltage, signaling the user with an intermittent tone and flashing LED. The tone can be disabled using the smart ON/OFF button. The GT-12A has a self test feature that continuously tests the integrity of the entire unit including the antenna. The GT-12A also features low battery indication and an auto power off feature. Designed and assembled in USA.

Manufacturer: nj365 Brand: HOTSYSTEM

Click here, you can see more about nj365 Gauge promotions Specifications: Condition: 100% New in Box & Good Quality Diameter: 2"/52mm READS: 8-18V Power: DC(10-15v) Professional 12V IGN MAX 0.3A IGN MAX 0.3A Red LED illuminated needles LED super white display Application: All Car Models Listed in Title Features: Smoke tint lens during the day,Clear and bright LED Display during the night. Add a racing look and feel to your ride,High quality and light weight package include: 1 x Universal 2" 52mm Volt Glow Car LED Gauge How to installation: 1.Gauge May Be Mounted In 2"/52mm Dia holes Or In Auto Gauge Custom Mounted Panels .Secure Gauge With Mounting Clamps Supplied. 2.Drill 3/8" Dia .Holes And Install Rubber Grommets Where Pressure Or Vacuum Line Passes Through Sheet Mental Such As Firewall. 3.Attach Nylon Pressure Line To Fitting On Back Of Gauge Using Adaptor ,Ferrule ,And Compression nut .Route Line Through Grommets To Engine Compartment .Connect Line To Pressure port On Engine By Using 1/8" Adaptor Ferrule And Compression Nut For Turbo And Prossure Gauge Or 1/8" Adaptor And Fitting For Vacuum Gauge. 4.Start Engine And Thoroughly Check Installation For Leaks. Twist In Light Socket Assembly And Connect One Wire(Yellow) To Dash Lighting Circut Or Other 12V Power Source And The Other Wire(Black) To A Good Ground.

Manufacturer: Fluke Brand: Fluke Model: TL224 Color: Black/Red

SureGrip accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Manufacturer: Fluke Brand: Fluke Model: TL224 Color: Black/Red

SureGrip accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Manufacturer: Garry's Warehouse, LLC Brand: Voltage Tester Pro Color: Green

Manufacturer: Meterteck Brand: Meterteck Model: MT-001 Color: Black and Yellow

Introducing The Meterteck MT-001 Digital Multimeter An essential, practical tool for professionals, electricians, hobbyists and general, household use, the Meterteck MT-001 Digital Multimeter is exceptionally easy to operate. Featuring a wealth of functions, it is intended for troubleshooting various electrical issues arising in household, industrial and automotive devices. It can be used to assemble, diagnose and repair circuitry and wiring. The Meterteck MT-001 measures DC current, AC/DC voltage, resistance, continuity (buzzer), transistor and diodes, with unprecedented accuracy. Features: • Fast, accurate measurements at 3 readings per second update speed; • Backlit LCD Screen with perspicuous readings display; • Overload protection in all ranges; • Heavy duty build, suitable for indoor & outdoor use; • Pre-installed 9V battery & TWO Test Cable Sets. Multimeter Specifications: - Range Selection: Manual Ranging - Max Display: 1999 - Sample Rate: 3 times/s - DC Voltage: 200mV/2V/20V/200V/500V ±0.8% - AC Voltage: 200mV/2/20/200/500V ±(0.5%+5) - DC Current: 2mA/20mA/200mA/10A ±1.4% - Resistance: 200/2k/20k/200k/2M ±0.8% - LCD Backlight: Yes - Overload protection: Yes - Data Hold: Yes - Diode Test: Yes - Auto Polarity indication: Yes - Low Battery indication: Yes - Continuity Test: Yes - Power Supply: 9V 6F22 (included) What's In The Box: - 1x Meterteck MT-001 Digital Multimeter - 1x 9V Battery 6F22 (Pre-installed) - 2x Test Leads (2 pairs) - 1x User Manual (English) - 1x E-book (English) Each Meterteck MT-001 Digital Multimeter Comes with a superior, 1 YEAR WARRANTY. Click Buy Add To Cart While Supplies Last!

Manufacturer: DIGITEN Brand: DIGITEN

It is a frequency tester of remote control, which can test the frequency of remote control exactly and show out clearly. It make you easy to adjust the exact frequency that you want when you are confecting the remote control. Test method: So long as you approach the remote control to the tester not above 10cm, it can test your remote control exactly. Application range: Electric door controller, auto door etc burglar alarm controller .remote control, electric lock, garage doorremote control ,entrance guard ,and so on. Features Test coverage: 250-450MHZ. Working voltage: DC7.5-10V(advise battery:6F22, don't include). Working current: 51mA. Standby current: 40mA. Test distance: 10cm.

Manufacturer: Luxebell Brand: Luxebell Model: LT-VT-001 Color: Voltage/amp Tester

Luxebell Voltage/amps Power Meter Tester Multimeter This USB Multi-meter plugs directly into any USB socket or Micro-USB charger or cable. It displays on the screen the voltage, current and capacity. Acts as both a vol and amp meter. All three are shown at the same time so there is no need to switch between screens. It is powered when you plug it in so no batteries are needed. Backlit screen will let you see it in low light conditions. Will handle up to 3.5A which is more than enough to test any cell phone or tablet. The monitor is suitable for 0-2.5 Amps, and 3-7 Volts and has an accuracy better than 1%. It can also give you a rough estimate of the capacity of the device you are charging.

Manufacturer: Elite Element Brand: AiLi Model: AiLi-EL-12050-1000

The DCM120100C Battery Monitor is designed to monitor performance most kind of battery systems with capacities of up to 999 Amp hours. · It can match different shunt 10-1000A. · It is easy to enable simple DIY installation. · The unit continuously monitors voltage, charge and discharge current, number of power (charge or discharge), the remaining battery capacity, these information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. Technical Specification Power Supply: 10~90V (external/Internal power supply) Measuring range: 0-120V(external power), 10-90V(external power) Display Type: 7 segment 4digits Red LED Sampling rate: 5 readings per second Accuracy: Volt ± 1% + 2byte / Amp ± 2% + 5byte Resolution: 0.01V, 0.01A, 0.01W, 0.01Ah, 0.01H