Electrical Testing - Page 29

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CTM-26-4 Color: Yellow

Insulator for automotive battery charger and trouble light clips CTM-24A, CTM-25 and CTM-25C. Replacement for Mueller clip insulator BU-26. Made of PVC. Temperature: 0 to 60 degree C. 3-7/8" Length. RoHS (2002/95/EC) compliant. Yellow color.

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 21985 Color: Red/Yellow/Blue

The nylon permeation barrier meets sae requirements J2196 for cfc, hcfc and hfc refrigerants.

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 760PH

The BK Precision 760PH is a PH Probe for use with the model 760 PH Meter

Manufacturer: Zhangzhou Eastern Intelligent Meter Co. Brand: all-sun Model: EM415PRO Color: Black

Please Note: This product set needs two batteries. Please install 9V 6F22 battery in both Receiver & Transmitter. This instrument is designed to identify and trace wires or cables without damaging the insulation. You can also use it in checking for short circuit and loacting open circuit and so on. There are a Sender and a Receiver included in the instrument. HOW TO USE THE PROBE? The probe of the Receiver is built of coiled steel and may be bent as needed, in order to reach wires in ongested or difficult areas. Depending on the circuit characteristic and sensitivity settings, the probe will pick up the signal from  the wire in a range of positions. However, for the best possible  range the Receiver's probe tip (black cap) should be positioned perpendicular (at 90o) to the wire being traced and either above or below it. SPECIFICATIONS: Receiver: On/Off button Test button Probe length: 7" flexible probe Sender: Tone/Off/Cont (Continuity) switch Tone/Cont (Continuity) LEDs Red and black test leads cable (61cm length, approximate) Receiver Dimensions: 38.5 x 4 x 2.3cm (H x W x D, approximate) Sender Dimensions: 6.5 x 5.6 x 2.1cm (H x W x D, approximate) DC Voltage: Operates from 6 to 42 volts Power : 2x9V battery (6F22) (Battery not provided by seller) PACKAGE: 1 x Automotive Short and Open Finder Sender 1 x Automotive Short and Open Finder Reciever(with carrying bag) English User Manual Standard Factory Packaging APPLICATION: Checking for short circuit,Loating open circuit,Wire identification, Wire traceing,etc. Please Note: This product set needs two batteries. Please install 9V 6F22 battery in both Receiver & Transmitter.

Manufacturer: GABOTRONICS Brand: GABOTRONICS

XMEGA Xminilab Plug-in Mixed Signal Oscilloscope The Xminilab is a mixed signal oscilloscope with an arbitrary waveform generator in a DIP module. It measures only 3.3 x 1.75 inches, and can be mounted directly on a breadboard. The Xminilab can also be used as a development board for the AVR XMEGA microcontroller.Features:Mixed Signal Oscilloscope: Simultaneous sampling of analog and digital signalsAdvanced Trigger: Normal / Single / Auto, with rising or falling edge and adjustable trigger levelMeter Mode: Average, Peak to peak and Frequency readoutXY Mode:           Plot Lissajous patterns           See the phase difference between two waveformsSpectrum Analyzer with different windowing options and selectable vertical logHorizontal and Vertical Cursors with automatic waveform measurementsArbitrary Waveform Generator with Sweep on all parametersDisplay options: Persistence, Different grid options, and moreIncludes: Two 10-pin headersSpecifications:General Specifications:ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROMGraphic OLED display 2.42", 128x64 pixelsModule size: 3.3" x 1.75"PDI interface4 tactile switchesUSB connectivity: Windows, Linux, Mac, AndroidLogic Analyzer specifications:8 Digital Inputs, 3.3V levelMaximum sampling rate: 2MSPSFrequency counter: 16MHzProtocol Sniffer: UART, I2C, SPIInternal pull up or pull downBuffer size: 256Oscilloscope specifications:2 Analog InputsMaximum Sampling rate: 2MSPSAnalog Bandwidth: 200kHzResolution: 8bitsInput Impedance: 1MΩBuffer size per channel: 256Input Voltage Range: -14V to +

Manufacturer: VEGTRUG LIMITED Brand: Vegtrug Limited

The VegTrug Frame & Greenhouse Cover creates a protected microclimate for plants in your Compact VegTrug. You can start planting earlier in spring and extend the growing season later into fall for an even bigger and better harvest. The easy-to-install, 21"-high steel frame installs in minutes with convenient push-fit connectors, and the reinforced polyethylene greenhouse cover has heavy-duty stitching and zippers. The cover slips snugly over the frame and attaches with strong VELCRO® brand tabs. Zips open for ventilation and easy access to crops.

Manufacturer: Test Products International, Inc Brand: TPI Model: SP200B Color: Red

The SP series probes are available in switchable attenuation. These series of probes are perfect for the technician needing additional features such as replaceable cable and interchangeable probe tip. The compensation adjustment for these probes is located in the BNC to eliminate noise pickup. The probe should have sufficient bandwidth and rise time for the test instrument and application. For oscilloscope probes, the input capacitance of your oscilloscope should be within the compensation range specification of the probe. Use TPI Probes with Bench Top, Portable, Analog, and Oscilloscopes. Logic signal and waveform tests. Measure voice / data signals. Analyze power quality. Test motor control circuits. Attenuation: x1 to x10. Cable length: 1.2m. Input impedance: 1 to 10 Megaohms R; 47 to 15pF L. compensation range: 10 to 30pF. IEC1010: CAT II.

Manufacturer: Acr Electronics Brand: Blue Sea Systems Model: 9630

9630AC Analog Ammeter - 2-3/4" Face, 0-50 Amperes ACSimple 2-wire connectionMeter senses and powers from coil slipped over wire to be measuredIncludes AC current transformer

Manufacturer: Smart Outlet Brand: Smart Outlet Model: PM8908C Color: Orange

Makes a great gift for the DIY handyman

Manufacturer: Fluke Corporation Brand: Fluke Model: PM9081/001

Dual banana plug 4mm male to female BNC adapter. Consists of two adapters. Maximum signal voltage: 300V rms. Maximum voltage to ground: 600V rms. CAT III per IEC 61010-031.