Electrical Testing - Page 296

Manufacturer: Etekcity Brand: Etekcity Model: 679113374812

Clamp meters, also called clamp-on meters, are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor. This Etekcity digital clamp meter is an auto-ranging multimeter that has two jaws which can close around an electrical conductor up to 26mm in diameter to measure AC current up to 400 amp without interrupting the circuit. A set of test leads is included for measuring AC/DC voltage, resistance and for diode and continuity test. It comes with a handy carrying pouch and an easy-to-read large LCD display, and also featues Data Hold, Max Reading, Auto off functions.SpecificationsSafety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V overvoltage and double insulationDisplay: Maximum display 1999Range selection: Auto rangingOverload display: Display OLMax. Jaw Opening: 28mm diameterMax. Current Conductor Size: 26mm diameterAC current: 2/20/200/400AAC voltage: 2/20/200/600VDC voltage: 200mV; 2/20/200/600VResistance: 200Ω; 2/20/200KΩ; 2/20MΩDiode test: YesContinuity test: YesDimensions: 8.19 x 2.99 x 1.18 inchesPower: 2 AAA 1.5V batteriesBattery Life: about 150hoursWeight: 9.2 oz Package Includes 1 x Etekcity Digital Clamp Meter2 x Test Leads (a pair) 1 x Carrying Bag1 x User Manual

Manufacturer: DELTRON EMCON Brand: DELTRON EMCON

DELTRON EMCON 307-0100 CROCODILE CLIP, 15MM, BLACK, 10A

Manufacturer: AGILENT TECHNOLOGIES Brand: Agilent Technologies

AGILENT TECHNOLOGIES 34138A TEST LEAD SET, 1kV

Manufacturer: MENDA Brand: Menda

MENDA 35621 PROBE, NYLON, SPUDGER, 5.5"

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 78020 Color: Multicolored

Determine pump efficiency, cut-off and suction, as well as analyze or try troubleshoot burner efficiency. Kit includes 2" gauge, 30" 0-150 lb. scale and 12" hose with fittings.

Manufacturer: Test Products International, Inc Brand: TPI Model: CK20M

Wide temperature range used in many digital thermometers. Identified by a yellow connector. Sub-Mini Connector: This is an industry standard connector type allowing TPI probes to be used in any thermocouple thermometer using this type of connector. Sub-mini connectors are quick and easy to use, simply push in and out. A wide variety of economical probes are available with sub-mini connectors, enhancing versatility and affordability of the temperature tester. Application: Clamp probe for pipe temperatures. Temperature range: -58 to 482 degree F. 25/32" Maximum jaw opening. Made of polyurethane. Measures 25/32" maximum jaw opening by 1/4" nominal jaw opening and 39-25/64" lead length. RoHS Compliant.

Manufacturer: Fluke Brand: Fluke Model: TL27

Twist Guard test leads offer adjustable length test tips for use in different measurement environments. Includes removable 4mm lantern tips that thread onto the lead tip. Fluke TL175 are the only test leads as tough as your meter. Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement. Double Insulated Silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures. Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure. Universal input plugs are compatible with all instruments that accept standard 4mm shrouded banana plugs. Probes always show correct category rating for tip being used. Exposed probe tip length: 19mm to 4mm (0.75" to 0.16"). Ratings: CAT II 1000V, CAT III 1000V, CAT IV 600V, 10A maximum, Pollution Degree 2. Environmental ratings: -20 to 55 degree C (-4 to 131 degree F), altitude: 2000m (6,562'). Conforms to EN61010-031. 1 year warranty.

Manufacturer: bayite Brand: bayite

This meter can only be used with one-phase AC power. And it can only measure the active power(real power). It doesn't show Apparent power. For more information about the difference, please search AC POWER on wikipedia. Main Specifications: Working voltage: 80 ~ 260VAC Working frequency: 50/60Hz Measuring:Accuracy: 1% Power Consumption: 0.2W Measurement speed: 2 times/s Store data when power off The blue backlight can be turned on/off manually Test Range and Display format: 1.Power: test range: 0~22kW < 1kW, display: 0.0~999.9W 1kW~10kW, display: 1000~9999W > 10kW, display: 0.1~22.0kW 2.Energy: test range: 0~9999kWh 10kWh, display: 10~9999kWh 3.Voltage: test range: 80~260V(single-phase) Display: 80~260V 4.Current: test range: 0~100A Display: 0.00~99.99A Precautions 1. Please make sure the AC input is Pure Sine Wave.(Municipal electric power is pure sine wave). Please don't use the meter to measure AC power converterd from a DC-AC inverter UNLESS you can make sure the output from your DC-AC inverter is Pure Sine Wave. This is very importatnt. 2. Applied load should not exceed the rated power. 3. Wiring order can not be wrong. 4. This module is suitable for indoor, please do not use outdoor. Packing including: 1x 80 ~ 260VAC 100A Power Multimeter w/ Open-close structure Current Transformer

Manufacturer: POMONA Brand: Pomona Model: 4513-POMONA

POMONA 4513 BANANA PLUG, 5A, TURRET

Manufacturer: Test Products International, Inc Brand: TPI Model: CK21M

Wide temperature range used in many digital thermometers. Identified by a yellow connector. Sub-Mini Connector: This is an industry standard connector type allowing TPI probes to be used in any thermocouple thermometer using this type of connector. Sub-mini connectors are quick and easy to use, simply push in and out. A wide variety of economical probes are available with sub-mini connectors, enhancing versatility and affordability of the temperature tester. Application: Clamp probe for pipe temperatures. Pipe clamp probe with sub-miniature plug. Temperature range: -58 to 482 degree F. 1-3/16" Maximum jaw opening. Made of polyurethane. Measures 1-3/16" maximum jaw opening by 3/4" nominal jaw opening and 39-25/64" lead length. RoHS Compliant.