Electrical Testing - Page 307

Manufacturer: Fieldpiece Brand: Fieldpiece Model: ATS1 Color: Multicolored

The ATS1, K-type thermocouple is great for measuring the temperature of flat surfaces. The disk tip on the thermocouple is designed to establish good thermal contact. There's no better way to measure a flat metal surface than the ATS1. Infrared gets a close temperature measurement but the ATS1 is more accurate.

Manufacturer: Autonics Brand: Autonics USA, Inc

Timer, Digital,1/16 DIN,10 Mode, Multi-Range, SPDT Out, 24-240 VAC/DC (socket req'd)

Manufacturer: Greenlee Brand: Greenlee Model: CM-450 Color: Greens

GREENLEE True RMS Clamp Meter

Manufacturer: Gary Cooper Publishing House Brand: Gardner Bender Model: GCM-221

The Gardner Bender GCM-221 Clamp-on Multimeter tests AC current, AC voltage, DC voltage, resistance and continuity. This meter has easy to read displays with autoranging style. Test leads and operating instructions. It has a voltage range of 600V, a current range of 600A, a crush rating of 150-Pound and a one year warranty. Since 1959, Gardner Bender branded electrical tools, voltage testers, wire management products and professional equipment have been a mainstay with electrical contractors. Gardner Bender's approach of offering superior quality at an affordable price makes them an attractive choice for those who prefer putting more money in their pockets than into the job. In addition, Gardner Bender offers industry leading innovation, offering a solution based approach with product designs and features based on end-user feedback.

Manufacturer: Applied Materials (Amat) Brand: Applied Materials (Amat)

Gasket, Rf Shield, Mac Icp

Manufacturer: Blue Sea Systems Brand: Blue Sea Systems Model: NA-CWR-20959

9233Analog Meter Shunt 200A/50mVFor us with DC AmmetersFor continuous operation, it is recommended that shunts not to be run at more than two-thirds (66%) the rated current under normal conditions

Manufacturer: Pomona Electronics Brand: Pomona Model: 6499

Featuring a new, compact, ergonomically designed probe handle, these modular general purpose passive voltage probes are ideal for use with a wide variety of oscilloscopes. They also feature a spring-loaded, pogo-pin replaceable tip. The fine tip probes are perfectly suited for probing high-density chip leads with less than 0.060in (1.52mm) spacing. Modular in design, the probe handle is capable of receiving a variety of spring-loaded and fixed tips, providing greater testing versatility. An affordable, versatile probe for many uses.

Manufacturer: SS-Tech Brand: SS-Tech

Important: 1, Please carefully consider the order. You must know how to use it. we do not provide technical support . 2, Do not try to disassemble or open it . Update: 1.Built-in 60 programes, 15 tester pictures 2.Support to 7''- 84'' panel 3,Resolutions: supoort to 2048x1536 2.Short circuit protection.Cancelled the CR2032 button battery in the tester, so no need to change the battery any more Leave us your email to get English instructions now!! Features: 1.Easy and convenient to operate, built-in procedure with 60 kinds of Lvds screen resolutions. 2.Digital number display indicator,you can choose corresponding resolution by swifting button. 3.Make screen line in proper position and prevent driver board from damage with LCD power supply short circuit protection function. 4.15 kinds of built-in standardized testing pictures. 5.The screen will show external VGA input signal when plug external VGA line. 6.Supporting to test LCD and LED screen with LVDS Interface from 7 inches to 84 inches Package includes: - 1pcs x Panel tester - 14pcs x LVDS cables - 1pcs x 4-c inverter (4 Independent transformers on the board, so it can driver 1 lamps, 2 lamps,3 lamps, and 4 lamps---perfect for testing) - 1pcs x LED test board (12 kinds of definitions with 7 output cables) - 1pcs x DC input cable - 1pcs x VGA input cable - 1pcs x Mini tester (switch) - 1pcs x 12v 4a power adapter

Manufacturer: AGM Brand: AGM Model: AGM-GS22

Applications: Gas Lines and Pipes Propane Gas refill station Fuel in marine bilges Exhaust and fuel leaks Heat Exchange Leaks Hazardous Living & Working Check manholes for safety Detected Gas: Methane, Natural Gases, Coal Gases, Steam, Propane, Ethanol, Butane, Propanol, Industrial solvent, Spraying fuel, Sulfureted Hydrogen, Paint, CO, Ketone, Gasoline, Naphtha, Smoke, Ammonia. Specifications: Detects Combustible Gas Sensitivity: 50 ppm Methane Response time: 2 seconds Operation Cycle: Continual Operation Warm up time: 60 seconds (in 25 °C / 77 °F, 60% R.H.) Continuous Operation Time: 8 hours (slightly vary with operation status) Sensor Size: 16 inches Power & Alarm LED indication Low battery indication: 3 ± 0.2V Operation temperature: 0 ~ 52 °C (0 ~ 110 °F) Power: 3 x 1.5V LR14 batteries Item Size: approx. 76 x 49 x 220 mm (3 x 3.39 x 8.66 inch) Item Weight: approx. 492g (17.4 oz) Features: Quick response with audible & visual indication. Protected circuit, charge protection for overheat, over-current and overcharge. 8 hours continuous operation. Flexible probe/sensor easily access even hard to reach areas. Use in any situation where combustible gasses, vapor or residues. Package Include : 1 x Combustible Gas Detector 1 x Black Cloth Pouch 1 x Instruction Manual

Manufacturer: Amprobe Brand: Amprobe Model: ACD-10 PLUS

The Amprobe ACD-10 Plus digital clamp meter is an average-sensing, auto-ranging multimeter for measuring current, voltage, capacitance, resistance, and frequency in electrical testing applications. It has a transformer clamp that measures alternating current (AC) to 600 amp and frequency to 100 kilohertz (kHz), and it comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 3,000 microfarads, resistance to 40 megaohms, and frequency to 100 kHz. The clamp has two 0.4" (10 mm) thick jaws that are slimmer than standard clamp jaws for improved access to tight areas. The jaws can close around electrical conductors up to 1" (26 mm) in diameter to measure current without touching or interrupting the circuit. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of multiple readings. The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is an auto-ranging multimeter and automatically selects the correct operating range for the property being measured. The meter has a 4,000-count resolution, meaning that it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electro...