Electrical Testing - Page 339

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 3022

The Kyoritsu digital megohmmeter is an auto-ranging insulation tester with four test voltages for measuring insulation resistance to 2,000MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance to 400Ω and AC and DC voltage to 600V, lighting a warning indicator and sounding a buzzer when a live circuit is detected. The comparator function allows a reference resistance value to be set, lights a "pass" or "fail" indicator for subsequent readings, and triggers a buzzer when a reading exceeds the reference value. Up to 99 insulation resistance readings can be stored in the unit's internal memory. When measurement is complete and the range selector is switched off, residual voltage is automatically discharged from the circuit under test. The test button can be locked for extended measurement sessions. The meter has an LCD with a backlight for visibility in low light that automatically turns off after 60 seconds. The display shows readings numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.This auto-ranging meter automatically selects the appropriate operating range for measurements. It is rated for category (CAT) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It automatically turns off after 15 minutes of non-use to conserve battery life and has a low-battery indicator that signals when the batteries need to be replaced. It comes with a set of test leads with a remote control switch for initiating a test, a test bar, a safety alligator clip, an extension prod, a test lead storage pouch, six AA batteries, and instructions. SpecificationsMaximum insulation resistance measured2,000MΩTest voltagesB009TAL7K...

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: IM75

The FLIR IM75 is both an advanced multifunction digital multimeter and premier handheld insulation tester for installation, troubleshooting and maintenance professionals. The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption and Earth Bond Resistance. Insulation tests can be performed instantly, continuously and over a timed duration for in-depth assessment. TA81 CAT IV Silicone Insulated Test Probes with screw on insulated alligator clips, TA50 Magnetic hanging strap, 6 x AAA batteries, and User manual/CD included.

Manufacturer: Tektronix Brand: Tektronix Model: TBS1052B

The Tektronix TBS1000B series digital storage oscilloscopes (DSO) with a range for bandwidth from 30 to 200 MHz and sample rates up to 2GS/s have Automatic measurements, convenience functions such as limit testing, data logging, frequency counter, TrendPlot, context-sensitive help menu, lowest loading for passive probe in this product class with small 3.8mm probe head to get to signals in hard to reach places, industrial grade 7" WVGA (800 x 480 pixels) Active TFT color LCD meaning great waveform viewing and high reliability, uncompromised acquisition rate of up to 2GS/s on all channel, and additional specifications include a rise time of 2.5ns.In addition to basic oscilloscope features, the TBS1000B offers three practical tools to facilitate your work of monitoring and signal capturing. If you are doing automatic tests, limit testing is a feature of TBS1000B in detecting and recording signals falling out of pre-defined templates. If you are in research and production requiring duty-free test, data logging will enable automatic saving of triggered waveforms. Duration can be set from 30 minutes to even infinite. If you are capturing intermittent faults, or monitoring power supply stability over time, then TrendPlot feature will help you plot the trends of any measurements over time.

Manufacturer: IDI Brand: IDGroup

Contact Probes HEADLESS 30 DEG SPEAR STEEL

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent Eclipse Plus C8,4.6x100mm,5um - BC

Manufacturer: Hantek Brand: Hantek DSO5102BMV

Specifications: •Model:DSO5102BMV •Bandwidth:100MHz •Channel:2 •Real-Time Sample Rate:1GSa/s •Equivalent Sample Rate:25GSa/s •Memory Depth:2M •Rise Time:1.7ns/3.5ns/5.8ns •Time Base Accuracy:±50ppm •Time Base Range:2ns/div-40s/div •Video Help:Yes •SD Card:Yes •Input Impendance:1MΩ •VOLTS/DIV Range:2mV/div～5V/div •A/D Converter:8 bit •Position Range:±50V(5V/div),±40V(2V/div～500mV/div), ±2V(200mV/div～50mV/div),±400mV(20mV/div～2mV/div) •DC Gain Accuracy: ±3% for Normal or Average acquisition mode,5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div •Bandwidth Limit:20MHz •Trigger Types:Edge,Video,Pulse, Slope,Over time,Alternative •Trigger Source:CH1,CH2,EXT,EXT/5, AC Line •Math:+,-,x,÷,FFT •Cursor Measurement: Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT) •Auto Measuerment:Frequency,Period, Mean,Pk-Pk,Cycli RMS,Minimum, Maximum,Rise time,Fall Time,+Pulse Width,-Pulse Width, Delay1-2Rise, Delay1-2Fall,+Duty,-Duty,Vbase,Vtop, Vmid,Vamp,Overshoot, Preshoot,Preiod Mean,Preiod RMS,FOVShoot, RPREShoot, BWIDTH,FRF •Display:7"TFT 16K Color LCD,800*480 dots

Manufacturer: Grayhill Brand: Grayhill

Test Plugs & Test Jacks Hardware Standard Black Cap

Manufacturer: Veris Brand: Veris

Bi-Directional Power and Energy Meter, Alarm Output (N.C.), 1 Pulse Output (N.O.), RS-485 Serial Modbus RTU Protocol, 5-Year Warranty

Manufacturer: Dranetz Brand: Dranetz Model: DRANFLEX300MHB8

Flexible Probes are available in three lengths 24 inches, 36 inches, and 48 inch lengths and available in two maximum ranges of 3000 A RMS and 6000 A RMS. Each probe can be powered by battery or AC adapter and multiple probes can be powered by a single AC adapter. Flex probes are available as separate probes, or as four phase packages, which include power supply. All Flexible Probes listed here are compatible with Dranetz portable instruments: PowerXplorer, PowerGuide, PowerVisa, PowerGuia, Energy Platform, PP4300, 658 with CA4300 adapter; and Dranetz permanent instruments: Encore 61000 with 61MAC module, Signature System 5513. Adapters are available for use with other instrument configurations; contact us for details. Dranetz recommends only Dranetz-brand probes be used with Dranetz power quality equipment

Manufacturer: Measurement Specialties Brand: Measurement Specialties

Test Accessories - Other 4612 PROBE