|
|
-
4.5 of 5.0 with 11 Reviews
SALE PRICE: $1,678.44 1% OFF
Manufacturer: FW BELL
Brand: FW Bell
Manufacturer: FW BELL
Brand: FW Bell
FW BELL 5170 METER, GAUSS, 200G-20kG, 0HZ-20KHZ, 2%
-
4.5 of 5.0 with 2 Reviews
SALE PRICE: $1,899.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: Fluke-123/003S
Manufacturer: Fluke Corporation
Brand: Fluke
Model: Fluke-123/003S
|
The Fluke ScopeMeter series 120 is a handheld electrical test device that combines a two-channel digital oscilloscope for viewing electrical signals with a true RMS, manual- and auto-ranging digital multimeter on each input for measuring AC and DC voltage to 1,250V, resistance to 50MΩ, capacitance to 500μF, frequency to 50MHz for Fluke 123 models and 70MHz for Fluke 124 models, and duty cycle from 2% to 98%. The oscilloscope has a real-time sample rate of 25MS/s and a record length of 512 points per channel for acquiring waveforms. Automatic and cursor measurement parameters allow an in-depth analysis of waveforms, and edge and video triggers allow isolation of specific signals. The oscilloscope's advanced automatic triggering recognizes signal patterns and automatically optimizes triggering, timebase and amplitude settings. It has an optical port for attaching a Fluke ITP120 probe (sold separately) for external triggering. The 5,000-count, true RMS (root mean square) multimeter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. It has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects the appropriate operating range. The relative function allows a measurement to be set as a reference value and displays subsequent measurements as a positive or negative deviation from that value, the touch-hold mode captures a stable reading, and the data-hold function freezes a reading on the display to aid documentation. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit’s diodes are working properly. Setups and screen shots—up to 10 for the 20MHz models and 20 for the 40MHz models—can be stored in the internal memory. A TrendPlot chart recorder graphs readings from both the oscilloscope and multimeter functions of the minimum and maximum values over time. The recorder can be programmed from 15 seconds per division over 120 seconds to...
-
4.5 of 5.0 with 2 Reviews
SALE PRICE: $2,374.95 1% OFF
Manufacturer: T3 Innovation
Brand: T3 Innovation
Model: AC120
Manufacturer: T3 Innovation
Brand: T3 Innovation
Model: AC120
The Arc Chaser Dual Mode TDR is capable of finding faults (Opens, Shorts, Arc Faults) on fully energized cables up to 600 Volts. Arc Chaser can monitor live cables for intermittent conditions, capturing these “events†and reporting where and when they occur. Using advanced Spread Spectrum Time Domain Reflectometry (SSTDR), Arc Chaser is capable of accuracy to fault of better than 1%.
-
4.5 of 5.0 with 14 Reviews
SALE PRICE: $2,608.67 1% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 5050
Manufacturer: AEMC
Brand: AEMC
Model: 5050
|
The digital/analog Megohmmeter model 5050 is the latest design in 5000V insulation testers. Features include automatic calculation and presentation of the dielectric absorption ratio (DAR), polarization index (PI) and dielectric discharge (DD). The model 5050 displays the test voltage, insulation resistance ad the leakage current during the test. Capacitance of the sample and discharge voltage present at the test leads is displayed at the conclusion of the test. This meter is designed with the highest level of built-in safety features. The model 5050 can be operated from an internal rechargeable battery system or from an AC line power. Direct measurement and display of capacitance and leakage current. Display resistance, test voltage and run time. Programmable test run times and PI ratio times. Smooth and alarm functions. Automatic test inhibition if live sample (>25). Automatic discharge and display of discharge voltage. Large dual-display with time, voltage and measurements shown. Rugged dual wall weatherproof field case. Designed and built to IEC safety standards. EN 61010-1, 600V Cat. III. Test insulation on cables, transformers, motors, generators, insulators and wiring installations. High resistance or absorption tests. Spot reading tests. Timed resistance measurements. Multi-layer insulation testing (DD). Test old or water damaged installations over long time runs. Motor insulation resistance measurements. Computer controlled production line testing. Predictive maintenance by storing results in PC for trend analysis. User selectable voltage testing to provide application specific testing. Measures 10-5/8" length by 9-53/64" width by 7-57/64" depth. Double insulation. CE mark.
-
4.5 of 5.0 with 41 Reviews
SALE PRICE: $2,711.30 5% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 6470-B Kit-300ft
Manufacturer: AEMC
Brand: AEMC
Model: 6470-B Kit-300ft
|
The AEMC 6470-B multi-function digital ground resistance tester with 300-foot leads performs 3-point ground resistance, 4-point soil resistivity, and 2- and 4-wire bonding resistance testing in rugged conditions, such as field maintenance with numerous tests. The tester is designed for ease of use with “connect–press–read†operation, a large easy-to-read LCD screen, and user alerts. For higher accuracy in electrically noisy environments, the tester can be operated in manual or automatic frequency scan mode from 40 to 513Hz. Test voltage of 16V or 32V can be selected up to 250 milliAmp (mA) test current. The tester automatically recognizes all electrode connections and their resistance value. The auto power-off feature turns off the tester after a set period for power management. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing.The tester’s software (included) is compatible with Microsoft Windows XP, Windows Vista, Windows 7, and Windows 8. It enables remote set-up and operation of all measurements, and provides data storage, real-time display, analysis, report generation, and system configuration. Up to 512 complete test results can be stored in memory for recording data in the field and then analyzing readings when convenient. After taking measurements, reports are automatically generated. The AEMC 6470-B exceeds IEC mechanical and safety specifications for shock, vibration, and drop tests. The double-insulated tester is compliant with grounding standards IEC 61557 parts 4 and 5. Safety ratings include EN 61010-1, CAT IV 50V, and pollution degree 2. The tester kit includes two 300ft. color-coded leads on spools (one red, one blue), two hand-tied 100ft. leads (one green, one black), two 5 ft. leads (one red, one blue), four 14.5" T-shaped auxiliary ground electrodes, five spaded lugs, 100ft. tape measure, DataView software, rechargeable NiMH batteries, optical USB cable, 110/240V power adapter with 115V U.S. powe...
-
4.5 of 5.0 with 2 Reviews
SALE PRICE: $2,749.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-725 US
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-725 US
|
The multifunction process calibrator is a powerful yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters. Support flow meter testing with frequency and CPM functions. Perform fast linearity tests with auto- step and auto-ramp features. Power transmitters during test using loop supply with simultaneous mA measurement. Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 10 ms. Store frequently used test setups for later use. Backlight lets you work in poor light. Large battery capacity of four AA cells. Battery door for easy changes. Voltage range: 0 to 100 mV, 0 to 10V (source), 0 to 30V (measure); voltage resolution - 0.01 mV, 0.01V, 0.01V; voltage accuracy - 0.02 percent Rdg + 2 LSD. Notes Max load, 1 mA. mA: 0 to 24 range, 0.001 mA resolution, .02 percent Rdg + 2 LSD accuracy. Notes max load, 1000 ohm. mV (TC terminals): -10.00 mV to 75.00 mV range, .01 mV resolution, .025 percent of range + 1 LSD accuracy. Resistance: 15 to 3200 ohm range, 0.01 to 0.1 ohm resolution, 0.10 to 1.0 ohm. Frequency range: 2.0 to 1000.0 CPM, 1 to 1000 Hz, 1.0 to 10.0 kHz; Frequency resolution - 0.1 CPM, 1 Hz, 0.1 kHz; Frequency accuracy - +/-.05 percent, +/-.05 percent, +/-.25 percent. For frequency source, waveform is 5V p-p squarewave, -0.1V offset. Loop Supply: 24V dc range, 10 percent accuracy. 30V maximum voltage. -40 to 71 degree C storage temperature. -10 to 55 degree C operating temperature. Relative humidity: 95 percent (10 to 35 degree C), 75 percent (30 to 40 degree C), 45 percent (40 to 50 degree C), 35 percent (50 to 55 degree C). Shock: 30g, 11ms, half-sine shock (or 1meter drop test). Vibration: random, 2g, 5-500 Hz. safety: CSA C22.2 No. 1010.1:1992. Battery: Four AA alkaline batteries. Battery life: 25 hours typical. Three years warranty.
-
4.5 of 5.0 with 29 Reviews
SALE PRICE: $3,728.67 1% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 5070
Manufacturer: AEMC
Brand: AEMC
Model: 5070
|
The Megohmmeter model 5070 is a fully automated 5000V graphical insulation tester. Selectable and programmable test voltage (40 to 5100V). Programmable temperature correction of resistance readings. The model 5070 is the only megohmmeter to offer both a graphical plot of the test right on the instruments, as well as a digital presentation of the test results. It has a large graphic display with five line alphanumeric display and graph. It also offers the ability to program up to three step voltage profiles, each containing up to five steps. The model 5070 has an RS-232 port which provides the ability to configure the unit and run the test from a PC. Test results can be generated directly to a printer using the DataView graphing and analysis software. Direct measurement and display of resistance, test voltage, run time, capacitance and leakage current. Automatic test inhibition if live voltage is present. Automatic discharge and display of discharge voltage. Large graphic display with five line alphanumeric display and graph of all test results. Rugged weatherproof field case. RS-232 interface for direct printing of results. 128kB memory for storing field test data. Remote operation from PC. Includes DataView software. Application include test insulation on cables, transformers, motors, generators, insulators and wiring installations. High resistance or absorption tests. Spot reading tests. Timed resistance measurements. dielectric absorption ratio (DAR) and polarization index (PI) tests. Multi-layer insulation testing (DD). Test old or water damaged installations over long time runs. Motor insulation resistance measurements. Computer controlled production line testing. Predictive maintenance by storing results in PC for trend analysis. User selectable voltage testing to provide application specific testing. Measures 10-5/8" length by 9-53/64" width by 7-57/64" depth. Double insulation. CE mark.
-
4.5 of 5.0 with 10 Reviews
SALE PRICE: $3,795.00 1% OFF
Manufacturer: COLE-PARMER
Brand: AEMC
Manufacturer: COLE-PARMER
Brand: AEMC
|
The Digital Ground Resistance Tester Model 6472 is a portable measurement instrument designed to measure Bond Resistance, Ground Resistance (with and without clamps), Soil Resistivity, Earth Coupling, Step & Touch Potential. When used in combination with the GroundFlex® Adapter Model 6474 (factory supplied product only), Power Transmission Tower and Tower Leg Ground Resistance testing is also available. The Model 6472 measures from 0.01 to 99.99kÙ and is auto-ranging, automatically seeking out the optimum measurement range, test frequency and test current. The adjustable test frequency (either manual or automatic) from 40 to 5078Hz test voltage provides rejection of high levels of interference, allowing it to be used under difficult conditions such as the presence of high stray currents that normally affect accuracy. Up to 512 test results can be stored in internal memory for later recall to the display or downloaded to a PC using DataView® software (included) for Automatic Report Generation, Automatic Fall-of-Potential Plot Generation, Frequency/Resistance Plots and much more. What's Included: Rechargeable NiMH batteries, optical USB cable, power adapter 110/240V with power cord 115V US, DataView software, and manual. KIT also includes: two 150 to 500 ft (depending on catalog #) color-coded leads on spools (red/blue), two 100 ft color-coded leads (hand-tied, green/black), one 30 ft lead (green), four T-shaped auxiliary ground electrodes, set of five spaded lugs, one 100 ft AEMC® tape measure, and carrying bag. Measure ground resistance , soil resistivity, and bonding resistance with one instrument 4-Pole (4-Point) Fall-of-Potential measurement for very low resistance measurements with manual or automatic frequency selection and automatic lead compensation 3-Point Fall-of-Potential measurement 3-Point earth coupling measurement Manual or automatic frequency scan from 40 to 513Hz for test accuracy in electrically noisy environments Earth coupling testing
-
4.5 of 5.0 with 3 Reviews
SALE PRICE: $4,690.00 1% OFF
Manufacturer: Tektronix
Brand: Tektronix
Model: AFG3151C
Manufacturer: Tektronix
Brand: Tektronix
Model: AFG3151C
Unmatched performance, versatility, intuitive operation, and affordability make the Afg3000 series of function, arbitrary waveform, and pulse Generators the most useful instruments in the industry. Applications: electronic Test and design, sensor simulation, functional Test, and education and training.
-
4.5 of 5.0 with 15 Reviews
SALE PRICE: $7,985.35 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: Fluke 435 II
Manufacturer: Fluke Corporation
Brand: Fluke
Model: Fluke 435 II
Think of the Fluke 435 II Power Quality and Energy Analyzer as your insurance policy. No matter what goes wrong in your facility, with the 435 II you will always be prepared. Equipped with advanced power quality functions and energy monetization capabilities, there is no electrical issue this model can’t handle.
|
|