Electrical Testing - Page 35

Manufacturer: AideTek Brand: AideTek Model: ADM4070

Built-in test fixture or use external test leads Open and Short Zero removes unwanted stray impedances from the measurement Auto power off Self-discharge for capacitance test Powered by 9V battery Complete with alligator clip test leads, 9V battery, and protective holster Low battery indication: Approx. less than 7.5V capacitor discharge protect: Yes Auto power off: It will power down about 30 minutes if no any measure. Function protect: Yes Anti-shock protect: Yes Sampling rate: 3times/s Operation way: Manual range Max. display: 1999 LCD size: 65.1mm Battery: 9V (6F22) Power dissipation: Quiescent current approx. 6mA Package Contents: DM4070 Test leads Manual

Manufacturer: Fluke

Feature: One pair (red, black) of comfort grip probes 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs Recommended for general purpose measurements CAT II 1000 V, , 10 A rating CAT IV 600 V, CAT III 1000 V only with protective cap CSA listed One year warranty Package including: 1 x Set Of Test Line

Manufacturer: ELIKE Model: 328D Color: Iron-gray and Red

328D is a compact and auto-ranging clamp meter with a large 4-digit screen. It measures AC/DC current to 600 amp,voltage,resistance,frequency and capacitor.It is ideally suited for current measurements in tight cable compartments.The K-type probe can test temperature.Audible continuity function confirms that the circuit conducts electricity,and a diode test detects whether a circuit's diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. A low-battery indicator signals when the meter's batteries need to be replaced. It needs about 10 days from China to US by EUB. Specifications: AC Current: 40A/400A/600A DC Current: 40A/400A/600A AC Voltage: 4V/40V/400V/600V DC Voltage: 400mV/4V/40V/400V/600V Resistor : 400/40K/400K/4M/40M Frequency :10Hz/100Hz/1KHz/10KHz/100KHz/1MHz/10MHz Capacitance: 5nF/50nF/500nF/5μF/50μF/200μF Temperature: -20℃ - +750℃ Features: Auto Ranging NCV Diode Continuity Buzzer Low Battery Display 
Data Hold Relative Data Hold Auto Power-off Overload Protection Sampling Frequency:3times/s Max Display:3999 Clamp :25mm General Characteristics: Product Color: Iron-gray and Red Product Net Weight:245g LCD Size:1.5 inch x1.1 inch Product Size:7inch x 2.5 inch x 1.1inch(L*W*T) Power:2×1.5V AAA(not included) Package Content: 1 x Digital Clamp Meter 1 Pair x Test Probe Leads 1 x Temperature Probe 1 x Handheld Bag 1 x English Manual

Manufacturer: Zhangzhou Eastern Intelligent Meter Co. Brand: all-sun

This multimeter is 4000 count,3 3/4-digit digital multimeter. It can be used to measure DC and AC voltage, DC and AC current,resistance,capacitance,frequecy,diode, temperature, continuity,duty cycle and electromagnetic field radiation. It can be used as a test tool for environment and devices, it is a high-performance and versatile meter. Features: 1)High-performance 2)3 3/4-backlight LCD display,max.reading of 3999 3)Data-hold mode 4)Auto polarity indication 5)Manual range and autorange mode 6)Auto/manual power-off 7)Relative mode 8)Overload protection 9)Low battery indication General Specification  Display: 3 3/4 digit LCD, with a max. Reading of 3999  Overrange Indication: OL shown on the LCD.  Negative Polarity Indication: - displayed automatically  Sampling Rate: About 2 to 3 times/ sec  Operating Temperature: 0℃ ~ 40℃,

Manufacturer: Haimer Brand: Haimer Model: 80.363.00

Haimer 3D Sensors are precision measurement tools designed and manufactured in Germany, to the highest quality standards. Haimer, Quality Wins!

Manufacturer: Supco Brand: Supco Model: EM10 Color: Multicolored

Enviro Meters measure critical HVAC/R parameters to maximize productivity and performance. Diagnose and solve HVAC system problems. Measures temperature, humidity and dew point. Temperature range: 14 degree F to 122 degree F. Humidity range: 0 percent to 99.9 percent RH. Minimum/maximum/average. Data hold. Backlit LCD. Auto power off. Hard carrying case included. Temperature resolution: 0.1 degree F. Humidity resolution: 0.1 percent RH. Temperature accuracy: +/- 1.8 degree F. Humidity accuracy: 3 percent RH (5 to 95 percent RH). Battery: 1.5V AAA x 3 (included). Measures 2-25/64" length by 1-3/16" width by 4-51/64" height.

Manufacturer: OWON Brand: OWON Color: Blue

3-in-1 multimeter with multimeter + datalogger + temperature measurement with Bluetooth BLE 4.0 for remote operation from Android and iOS devices. Measurements: DC Voltage AC Voltage DC Current AC Current Resistance Capacitance Frequency Duty cycle Temperature Diode test Features: Display: 6000 count LCD backlight Bluetooth BLE 4.0 Auto-scale Max / Min value Auto Power-off Low-battery indicator Data Hold Relative measurement (delta) True RMS Offline recording function Input protection Input impedance: 10Mohms LCD size: 69 x 52 mm Display area: 67 x 46 mm (effective viewing area: 66 x 45 mm) Battery: 3V (2 x 1.5V AA) Weight without package: 320 grams What is included: Multimeter User Manual Probes Soft carrying case Alligator Clips Multifunction test bench K-type thermocouple

Manufacturer: 3M Brand: 3M Model: 82 Color: Brown

Use with Scotch-Brite Heavy Duty Griddle Pad Holder 482 to remove burned-on food and grease. Tough open web construction for easy cleaning and longer life. Ideal for interim cleaning of griddles at operating temperature. Applications: Used for the removal of burned-on food and grease. Suitable for interim cleaning of griddles at operating temperature. Measures 5-1/2" length by 4-1/2" width

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CTM-60X

Standard alligator clip with 4mm barrel. Accepts standard banana plug in addition to a solder or crimp connections. Jaws open to 19/64". 2-7/32" Length. Current max: 10A. RoHS (2002/95/EC) compliant.

Manufacturer: Alltronics LLC Brand: AnaTek Instruments Model: ARTest_kit

This Blue Ring Rester kit is an inexpensive and effective way to test any high Q inductive component. It is especially useful for doing a quick check on flyback transformers, line output transformers and other high frequency inductive components like deflection yoke windings and SMPS transformers. Hi Q = low loss inductive components. A shorted turn or coil will show no rings. A shorted FBT diode will show few or no rings. The LEDs on the left side show the Q of the device being tested, more lights = higher Q, i. e., no lights = short circuit, red = Bad or low Q, yellow = medium Q, green = Good or high Q. This kit will take 1-2 hours to build depending in experience. Full 1yr warrenty on parts.