Electrical Testing - Page 352

Manufacturer: Icstation Brand: Generic

This is a digital square waveform generator module supporting 1Hz-1024Hz frequency and 1%-99% duty cycle adjustment through the on-board potentiometer and also support external potentiometer control. DC 5V-24V wide voltage input and dual channel complementary output with red LED display the parameter ideal as the square wave source for instrument testing. Specifications: Frequency Range: 1Hz-1024Hz Frequency Resolution:1Hz Duty Cycle Range: 1%-99% Duty Cycle Resolution: 1% Working Voltage: DC 5-24V Load-free Current: 60mA Panel Size: 79 X 43mm/3.11 X 1.69inch(L*W) Package Included: 1X Digital 2 Channel Square Wave Pulse Signal Generator Module 1Hz-1024Hz 1%-99%

Manufacturer: NW Brand: 60°N 95°W

Output power(W) 120W Input voltage(V) 24V DC Output voltage(V) 12V DC Output Type: Single Input: Input voltage range(V)16V-35V DC Efficiency 93% Output: Output voltage range(V) VOUT: 12V DC Output current(A) 10A Voltage adjustable 2% Ripple wave: 50Mv Starting delay time: < 2S Isolation :Non-isolated Waterproof Waterproof IP68 Other: Dimension 74x74x32mm net weight:125g Cooler natural cooling Rated temperature: 45 degree Operating temperature -40degrees -80degrees Input transient voltage protection, output over-current protection, output short circuit protection, chip overheating protection function. This power supply without reverse connection protection, input and output negative pole line cannot be reversed Cooler natural cooling Rated temperature ° 45° Operating temperature -40°-80° Probability of reliability >100000h

Manufacturer: UEi Test Instruments Brand: UEi Test Instruments Model: ATLBPK

Founded in Vancouver, BC in 1946, UEi Canada Inc. is a leading distributor of portable testing and measuring equipment for the HVAC and Electrical industry. In 1987, UEi Canada joined the Kane Group of companies with sister companies in England and United States.

Manufacturer: UEi Brand: UEi Test Instruments Model: ATL301KIT Color: Multicolored

UEi Test Instruments designed the ATL301 Electronic Test Lead to work with a broad range of Digital Multimeters and Clamp-on Testers. The kit includes a set of straight to right angle test lead extensions, twoinsulated fine point leads, a pair of alligator clips, and a pair of remote grabber clips. UEi�s ATL301 Kit is packaged in a practical 3-compartment pouch to help keep this essential accessory safe and sound. MET listed for US and Canada at CATIII 600 V or higher.

Manufacturer: Pomona Electronics Brand: Pomona Model: 3782-12-0 Color: Black

Provides a Minigrabber output from a Banana Jack. Banana plug is capable of vertical and cross stacking. Mates to Model 1581 or any standard Banana Jack

Manufacturer: SainSmart Brand: SainSmart

Description: DSO138 is partially open-sourced. This opens the possibility for users to add different features or develop new applications on the hardware Features: - Highest real-time sampling rate : 1Msps - Accuracy : 12Bit - Sampling buffer depth : 1024 bytes - Analog bandwidth : 0 - 200KHz - Vertical sensitivity : 10mV / Div - 5V / Div ( 1-2-5 progressive manner ) - Adjustable vertical displacement , and with instructions - Input impedance : 1M ohm - Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe ) - Coupling modes include DC / AC / GND - Horizontal time base range : 10us / Div - 50s / Div ( 1-2-5 progressive manner ) - With automatic , conventional and single -shot mode , easy waveform capture the moment - Available rising or falling edge trigger - Adjustable trigger level position , and with instructions - Coupling modes include DC / AC / GND - Observable trigger waveform before ( Negative delay ) - Freeze the waveform display (By pressing HOLD function) - Shutdown Current: 20nA Package list: - DSO138 osciloscop - One FREE Probe Note : This is a fully Assembled and Soldered professionally

Manufacturer: Custom Leathercraft Brand: Custom Leathercraft Model: 1509 Color: Black

Our premium quality electrician’s tool pouch with 21 pockets has a zippered, fold-down cover to protect your tools, a steel hammer loop, an ergonomic rubber handle, an adjustable padded shoulder strap and an air mesh padded back panel for comfort. At a GlanceCombination of 25 pockets and sleeves provide a wide range of tool and parts storageEasy-grip, double-pull, main-pocket access zipper helps keep tools secureSmall zippered pocket in top flap and large zippered pocket around backElectrical-tape loop and hammer holderAdjustable, padded shoulder strap (can be removed for attaching the pouch to your belt)Soft-grip rubber handle for easy transportDurable yet lightweight poly-fabric material with poly-ballistic bindingMain pocket measures 4-1/2 by 9 by 9 inches (LxWxH)Tool pouch with exterior holders for a hammer, wrench, electrical tape, and more. View larger. Top flap unzips and folds out of the way for easy access. View larger.CLC 1509 Professional Electrician's Tool PouchPacked with features, the CLC 1509 electrician's tool pouch offers a dependable solution for utility technicians, electricians, maintenance/repair workers, and the general handyman--anyone who needs to keep their tools close at hand while having their hands free.Conveniently CompartmentalizedThe zippered top flap on the tool pouch prevents tools from spilling out when not in use and helps keep them secure when moving around the job site, whether climbing, crawling, or maneuvering through tight spaces. Zipped open, the top flap stays out of the way and in place with a hook-and-loop strapped connection. The tool pouch provides eight pockets to keep tools neatly organized.Ruggedly BuiltThe CLC 1509 tool pouch features durable polyester-fabric construction with poly-ballistic binding for reliable, high-quality performance. Even more, the tool pouch comes equipped with ergonomic rubber handles and a shoulder strap with air-mesh padding, which is also used on the back side of the pouch to help reduce heat build-up and increase comfort.Please ...

Manufacturer: INTERCONNECT DEVICES Brand: INTERCONNECT DEVICES

INTERCONNECT DEVICES SS-30-J-1.3-G SPRING CONTACT PROBE, PCB

Manufacturer: FLUKE Brand: Fluke Model: TP1

Price for: Each 1 . Accessory Type: Slim Reach Test. Approval Categories: CAT IV 600V. Body Material: Stainless Steel. Color: One Red. RoHS Compliant: NA. SVHC: No SVHC (20-Jun-2013)

Manufacturer: PAI Industry Brand: PAI Industry

Spacer - .331 Inch Think BSP1061331