Electrical Testing - Page 355

Manufacturer: MASTECH Brand: Mastech

Features:Perform measurements of AC/DC voltage and current, resistance, capacitance, frequency, duty cycle, diode and continuity test.Measuring frequency, AC/DC current and duty cycle by clamp.LCD with backlight & bar graph and clamp lighting bulb.Relative value measurement and auto range function.Provided with one excellent cloth bag for conveniently-carrying.Data holding, to hold the readings while taking measurement.Maximum and minimum value measuring and holding.Automatic indication of functions and unit symbols.Auto power off and low battery indication.Full overload protection and dual insulation protection.Over-molding rubber case, shake-proof, skid-proof and good touch-feeling.Package including:1 * Digital Multimeter2 * Test Lead1 * Instruction Manual

Manufacturer: ELIKE Brand: ELIKE Model: 3266TD Color: Iron-gray and Orange

Nanjing ELIKE Meter specializes in developing and manufacturing digital clamp meter ,analog meter, battery tester and insulation resistance tester etc. 3266TD is a compact and auto-ranging clamp meter with a large 4-digit screen. It measures AC current to 600 amp, AC and DC voltage to 600V, and resistance to 40M,frequency and capacitor.It is ideally suited for current measurements in tight cable compartments.The K-type probe can test temperature.Audible continuity function confirms that the circuit conducts electricity,and a diode test detects whether a circuit's diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. A low-battery indicator signals when the meter's batteries need to be replaced. Specifications: AC Current: 400A/600A AC Voltage: 400mV/4V/40V/400V/600V DC Voltage: 200mV/2V/20V/200V/600V Resistor : 400/40K/400K/4M/40M Frequency :10Hz/100Hz/1KHz/10KHz/100KHz/1MHz/10MHz Capacitance: 5nF/50nF/500nF/5μF/50μF/200μF Temperature: -4℉－＋1383℉(-20℃ - +750℃) Features: Auto Ranging,NCV,Diode,Continuity Buzzer,Low Battery Display,Data Hold,Relative Data Hold Auto Power-off,Overload Protection,Sampling Frequency:3times/s , Max Display:3999 General Characteristics: Product Color: Iron-gray and Orange Product Weight:200g LCD Size:38.4×28.4mm/1.5 inch x1.1 inch Meter Size:183×47×25mm /7inch x 2.5 inch x 1.1inch(L*W*H) Power:2×1.5V AAA power is not included Package Content: 1 x Digital Clamp Meter 1 Pair x Test Probe Leads 1 x Temperature Probe 1 x Carrying Case 1 x English Manual

Manufacturer: BAYM Electric Co., Ltd Brand: BAYM Model: BM18SA

5(32)A 120V 60HZ Single phase Din rail KWH Watt hour din-rail energy meter LCD KWH 32A BM18SA Function and Features: 35mm standard DIN rail installation, comply with standard DIN EN 50022 Single pole width (modulus 17.5mm) comply with standard DIN 43880 Standard configuration: 7+1 digits display (9999999.1kwh) by white black source LCD May select 7+1 digits display (999999.1kwh) without backlight source general LCD Standard configuration: pulse output passive (polarity). The pulse output passive can be no polarity Contact with all kinds of AMR system convenient; comply with standard DIN 43864 Bicolor LED instructions power supply state is green and signal of energy impulse red. Specification: 1.Meter type:BM18SA (LCD display) 2.Digit Display mode:7+1 digits 3.Nominal voltage(Un):120V AC 4.Insulation capabilities:AC voltage withstand 5.Impulse voltage withstand:2KV for 1 minute;6KV ¨C 1.2¦ÌS waveform 6.Basic current (Ib):5A 7.Maximum rated current (Imax):30A 8.Operational current range:0.25A-30A 9.Over current withstand:960A for 0.01s 10.Operational frequency range:60Hz +-10% 11.Internal power consumption:less than 2W / 10VA 12.Test output flash rate (RED LED):2000 impulses/kWh 13.Pulse output rate (pins 20 & 21):2000 pulses/kWh 14.Power supply indicator (Green LED):Meter is connected and working OK 15.Consumption indicator (RED LED):Flashing at load running 16.Data save:The data can be stored more than 20years

Manufacturer: Klein Tools Brand: Klein Tools

Included with (2) NCVT-2 Dual Range Non-Contact Voltage Tester with Pocket Clips each tester is designed to automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC). Ideal for electrical cables, cords, circuit breakers, lighting fixtures, switches, outlets, and wires. With a high intensity, bright green LED light for illuminating in a darken workspace. Made inside a lightweight and durable polycarbonate resin construction with CAT IV 1000 Volt rating. Includes (2) NCVT-2 Voltage Testers with Pocket Clips.

Manufacturer: GeneralAire Brand: Generalaire Model: Replacement for GeneralAire 990-53 Color: Multicolored

General 990-53 Humidifier 24 volt Water Valve General part numbers 990-53, 99053, 990 53 Fits General Humidifier models: 709, 1040, 1042 using 24 volt Solenoid Valves Manufactured by GeneralAire (General Aire) General Part Numbers: 990-53, 99053

Manufacturer: Pomona Electronics Brand: Pomona Model: 3564-0 Color: Black

An ideal test adapter for rapid testing of the hard-to-get at contacts of multi-pin/socket connectors. Flexible tip allows testing of adjacent contacts. Flexibility and full insulation protects against shorting or contact damage

Manufacturer: Fluke Brand: Fluke Model: C90 Color: Multicolored

INCLUDES:• (1) CaseFEATURES:• Reinforced belt loopSPECIFICATIONS:• Accommodates: fluke 8060A and 8062A and holds fluke 21, 23, 29, 50 and 70 series meters in a C70 holsterCarrying case for Fluke 21,23,50, and 70 Series C90 Soft Case for DMMs Zippered carrying case with inside pocket and belt loop.

Manufacturer: BSIDE Brand: BSIDE Model: ACM03 Plus

Features:It is designed according to IEC1010-1 and IEC1010-2-032 concerning safety requirements.Safe and professional3999 counts digital LCD displayAuto/Manual rangeUse for measure AC/DC current, AC/DC voltage,resistance, capacitance, frequency, diode and circuit, etc.Continuity test, duty cycle test Non contact voltage detectorClamp lighting & back light.Data holdSpecifications:DCV: 400m/4V/40V/400V±0.8%, 600V ±1.0% ACV: 4V/40V/400V/600V±1.2%ACA: 40A/400A±3.0%DCA: 40A/400A±3.0%Resistance: 400?/4k?/40k?/400k?/4M?±1.2%, 40M?±2.0%CAP: 40nF/400nF/4?F/40?F/100?F±3.0%Frequency: 50Hz/500Hz/5kHz/50kHz/100kHz±1.0%NCV:90-1000V(50-500Hz)Duty Cycle: 0.1~99.9% ±3.0%Diode / ContinuityFunctionRangeResolutionAccuracyDiode 1V0.001VDisplaying approximate forward voltage of diodeContinuity Built-in buzzer sounds when resistance is lower than 50ohm.Open circuit voltage: approx. 0.5VOverload protection: 600V DC or True RMS AC

Manufacturer: Zhangzhou Eastern Intelligent Meter Co. Brand: all-sun Model: EM555

The fence tester is designed for measuring pulse voltages on the electric fences. It features Smart Power technology so that it will turn on at the detection of a pulse and turn off after about 4 seconds when no pulse is detected. This technology saves battery power and ensures that the fence tester is turned off when not in use. Product features: Power supplied by 1 piece 9V (6F22) battery.（Not provided by seller） Display:LCD Max Reading:9.9 Measurement Range: 0.3kv to 9.9kv (300 volts to 9,900 volts) pulse voltage. Saving battery power and ensures that the fence tester is turned off when not in use. SPECIFICATION Display:LED Max.Reading:9.9 Measurement Range:300V to 9900V pulse voltage Pulse Rate:one pulse every 0.5 sec to 2 secs Measurement Rate:each detection of a pulse passing trough the fence line under test Power Consumption:about 0.03W Operating Temperature:0-40 Celsius; Storage Temperature:-20~60℃; Battery:9V.6F22or equivalent （Not provided by seller） Size:174x70x33mm(for main body only) Weight:about 228g Operation Instruction 1.Drive the probe into the moist soil. (If the soil is too dry, add a suitable amount of water to the soil in advance.) 2.Connect the test hook to the fence line. 3.The fence tester will turn on when a pulse is defected. 4.If further pulses are detected, the voltage will be displayed. For more accurate measurement result, read the display after three pulses have been detected. Note: Reading's unit is kV. For example, if the display reads 6.0, the voltage value is 6.0 kV. 5.After the test hook is removed from the fence, the last reading will be held on the display for about 4 seconds. It will turn off automatically in 4s when no pulse.

Manufacturer: Zhangzhou Eastern Intelligent Meter Co. Brand: all-sun Model: EM555

The fence tester is designed for measuring pulse voltages on the electric fences. It features Smart Power technology so that it will turn on at the detection of a pulse and turn off after about 4 seconds when no pulse is detected. This technology saves battery power and ensures that the fence tester is turned off when not in use. Product features: Power supplied by 1 piece 9V (6F22) battery.（Not provided by seller） Display:LCD Max Reading:9.9 Measurement Range: 0.3kv to 9.9kv (300 volts to 9,900 volts) pulse voltage. Saving battery power and ensures that the fence tester is turned off when not in use. SPECIFICATION Display:LED Max.Reading:9.9 Measurement Range:300V to 9900V pulse voltage Pulse Rate:one pulse every 0.5 sec to 2 secs Measurement Rate:each detection of a pulse passing trough the fence line under test Power Consumption:about 0.03W Operating Temperature:0-40 Celsius; Storage Temperature:-20~60℃; Battery:9V.6F22or equivalent （Not provided by seller） Size:174x70x33mm(for main body only) Weight:about 228g Operation Instruction 1.Drive the probe into the moist soil. (If the soil is too dry, add a suitable amount of water to the soil in advance.) 2.Connect the test hook to the fence line. 3.The fence tester will turn on when a pulse is defected. 4.If further pulses are detected, the voltage will be displayed. For more accurate measurement result, read the display after three pulses have been detected. Note: Reading's unit is kV. For example, if the display reads 6.0, the voltage value is 6.0 kV. 5.After the test hook is removed from the fence, the last reading will be held on the display for about 4 seconds. It will turn off automatically in 4s when no pulse.