Electrical Testing - Page 364

Manufacturer: Sanwa Brand: Sanwa Model: SP-21

Manufacturer: SainSonic Brand: SainSonic

The 1mW (3-5KM)visual fault locator is used for the measurement in single-mode or multi-mode fibers. It features a rugged design, a universal connector and an accurate measurement. Applications * Telecommunications Engineering and Maintenance * CATV engineering and maintenance * Cabling System * Other fiber-optic project Specifications * Wavelength: 650nm ± 20nm * Output Power: >1mW * Dynamic Distance:

Manufacturer: Made in usa Brand: awasy2415

DRC DYNAMICS 153/021-900-24C ROTARY ENCODER RESEARCH 1/4" SHAFT DIAMETER& (I9) FREE! Sellers: Add a FREE map to your listings. FREE!Exported By ExportYourStore

Manufacturer: Digital Dowsing Brand: Digital Dowsing

Overview of the Simple Energy MeterThe Simple Energy Meter (SEM) reacts to EMF, ionization and static charges as a combined energy field. Customizable sensitivity levels enable the device to function in difficult environments. The SEM provides 4 operating modes to monitor the surrounding energy fields displaying levels on the 5 light display. Two of the energy monitoring modes provide audio tone feedback.Modes Available on the Simple Energy MeterMode 1 – Energy Level Mode Mode 1 will show you the energy around the meter and display it on a 5 LED display. The sensitivity can be changed using the up / down buttons to filter background energy. Instead of “averaging,” energy is sampled rapidly, allowing the display to show different energy levels. Pressing the left button increases the sensitivity; pressing the right button decreases the sensitivity.Mode 2 – Energy Level Mode with Audio Tones Mode 2 will show you the energy around the meter and display it on a 5 LED display. Includes Audio Tones which will alert you to these changes. The sensitivity can be changed using the up / down buttons to filter background energy. Instead of “averaging,” energy is sampled rapidly, allowing the display to show different energy levels. Pressing the left button increases the sensitivity; pressing the right button decreases the sensitivity.Mode 3 – Averaged Energy Level Mode Mode 3 will show you the energy around the meter and display it on a 5 LED display, using the center LED to act as the average. By doing this, you can now see changes of both increases and decreases of energy.Mode 4 – Averaged Energy Level Mode with Audio Tones Mode 4 will show you the energy around the meter and display it on a 5 LED display, using the center LED to act a

Manufacturer: Extech Instruments Brand: Extech Model: EX710 Color: Multicolor

Functions include Inrush, Capacitance and Frequency FEATURES Models with AC/DC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Diode and Continuity 1ms Fast Peak Hold captures Inrush currents and transients True RMS models Double molded housing for better grip and one-handed operation Large LCD display with bright backlighting Data hold "freezes" data in display 1.2" (30mm) circular jaw opening for large cables (500MCM) Auto power off Complete with test leads, 9V battery and Type K bead wire probe (EH720, EH730) and carrying case

Manufacturer: MR.JIANG Brand: Ray-JrMALL Model: RayMALL0711 Color: Orange

Auto Calibration to assure the accuracy Auto linear compensation: this advanced software program enhances the precision by correcting the non-linear accuracy of transducer Coupling status indication: Observing the coupling icon to learn if the coupling is accomplished or not 10 thickness measurement storage and recall function available, which facilitated the height work or working in wild area Sound velocity measurement: with a given thickness by a sample hardware to measure the sound velocity, which avoid the further conversion or consultation of the table 12 sound velocity for different material which also adjustable Low battery indication Auto power off mode designed to conserve battery lifeMore than 10000 times long life keys The unit has a special memory that retains all of its setting even when the power is off Specifications LCD Digital display: 4 digits Minimum display unit: 0.1 mm Working frequency: 5 MHz Accuracy: ¡À (1% H + 0.1 mm) (H denotes the measured thickness) Sound Velocity Range: 1000 ~ 9999 m/s Measuring Sound Velocity with a given thickness Measuring Range: 1000 ~ 9999 m/s When the given thickness over 20mm, the accuracy is ¡À1%; when the given thickness less than 20mm, the accuracy is ¡À5% Operating Temperature: 0 ~ 40 ¡ãC (32 ~ 104 ¡ãF) Power supply: 1x 9V Battery(included) Operation Current: Normal Operation Current ¡Ü 50 mA With Backlight turn on current ¡Ü 120 mA Stand-by Current: ¡Ü 20 ¦ÌA

Manufacturer: TENMA Brand: Tenma

TENMA 76-009 TEST LEAD, SINGLE, BLACK, 1016MM, 1200V

Manufacturer: Puuli Brand: Puuli

Description: MESR-100 V2 AutoRanging In Circuit ESR Capacitor Meter Tester Up to 0.001 to 100R MESR100 Capacitor Meter Tester Feature: JINGYAN MESR-100 V2 Auto-ranging capacitor ESR and Low Ohm Meter Measuring range from 0.001 to 100.0R, support IN CIRCUIT Testing Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check In the market, there is some technique using short pulse method to testing, but the value will be varying vs the capacitance and sometimes reading is different from the manufacturer's value Specification: Accuracy maybe affected by the test lead's length and contact point resistance. Standard test leads is 15cm, for longer test leads need special shielding to affect the EMI inference (Can contact sales' person for more detail) Accuracy: Up to 1% (detail on above table) High Resolution: 4 digit, or 0.001Ohm @ 1 Ohm range Measuring voltage: 80 Hours Package Included: 1 X MESR-100 V2 AutoRanging In Circuit ESR Capacitor Meter Tester Up to 0.001 to 100R MESR100 Capacitor MeterCapacitor Meter Tester 2 X 15cm test clips

Manufacturer: Hantek Brand: MUW Model: CC-650

AC/DC frequency range: Up to 20 kHz Effective Measurement Range: 20mA to 650A DC It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms. Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, youˇre able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data. Power circuit measurement and malfunction analysis; Motor drive of frequency converter (or other electronics) measurement; Power electronics equipments measurement. Captured Conductor Size:9mm maximum Low Battery Indictor:red LED lighting Operating Temperature:0℃to 50℃70% R.H. Storage Temperature:-20℃ to +70℃, 80% R.H. Battery Type:9V DC, NEDA 1604, 6F22,0006P Battery Life:100 hours typical with alkaline Weight:250 gm typical Dimensions:195mm(H) x 70mm(W) x 33mm(D) Output:Supplied with coil cable with straight banana plug or BNC plug.

Manufacturer: Amprobe Brand: Amprobe Model: AM-560

The perfect choice for the HVAC technician Measure a complete range of electrical parameters Perfect for HVAC Applications The AM-560 Commercial HVAC Digital Multimeter is the perfect choice for the HVAC technician. It measures a complete range of electrical parameters for HVAC applications with dual thermocouples for taking differential temperature measurements, low pass filter for variable frequency drives, capacitance for motor startups or run capacitors, and microamps for flame sensors. Feature-Rich Digital Multimeter The Amprobe AM-560 Commercial HVAC Digital Multimeter (also known as a multitester) measures AC/DC voltage to 1,000V, AC/DC current from 600µA to 10A, frequency range of 60Hz to 60 MHz, resistance from 60Ω to 60 MΩ, capacitance 60nF to 60 mF, and temperature from -40°F to 1832°F (-40°C to 1000°C). It performs audible continuity tests and diode tests. Dual thermocouples allow for differential temperature measurements such as simultaneous temperature readings on the low and high side of an HVAC (heating, ventilation, and air conditioning) system. A low-pass filter allows users to read voltage and frequency on variable frequency drives. Built-in safety features include the low impedance mode and non-contact voltage detection, which verify the presence of voltage and stray voltage. This meter is manual and auto-ranging for user flexibility and a duty cycle indicates the percentage of time a signal is above or below the trigger level during one cycle. The meter has a data hold and a peak hold for specialized signal measurements as well as Max/min memory and a relative reading to take the difference between two measurements. The 6,000-count, dual function display is backlit for readability in low-light conditions and an on-screen analog bar graph detects noise. It provides a warning against improper test lead connections as well as a low battery warning. This meter meets safety standards for Category III to 1,000V and Category IV to 600V. It has a built-in flashlight, a r...