Electrical Testing - Page 373

Manufacturer: Amprobe Brand: Amprobe Model: ACD-23SW

The Amprobe ACD-23SW clamp meter measures voltage, current, resistance, capacitance, continuity, and temperature in electrical wires and cables up to 1.18in. (30mm) in diameter. This true root mean square (RMS) meter provides accurate readings when measuring linear or non-linear loads with current or voltage that has a sinusoidal or nonsinusoidal waveform. The clamp head swivels 180 degrees so that the display can be turned for greater readability and the jaw is designed for single-handed operation. The non-contact voltage indicators detects voltage from 70 to 600V alternating current (AC), works on any range, and indicates the presence of AC voltage with a red indicator light and audible beep. The tester measures AC and direct current (DC) voltage up to 600V, AC current up to 400A, resistance up to 40 megaohms, capacitance up to 4mF, and continuity up to 400 ohms. It also measures temperature from -30 to 400 degrees F (-35 to 400 degrees C) for more accurate readings. The unit is both manual and autoranging. The 3-3/4 LCD has a maximum reading of 3,999 and has a hold function. The tester is powered by two AAA batteries and has an auto-off function that turns the unit off after 10 minutes of idle time. The ACD-23SW is designed for use by electricians and electrical contractors. Specifications Power supply AAA batteries (two, included) AC voltage range 0 to 600V DC voltage range 0 to 600V AC current range 0 to 400A Resistance range 0 to 40 megaohms Capacitance range 0 to 4mF Continuity range 0 to 400 ohms Temperature range -30 to 400 F/-35 to 400 C Weight (including batteries) 1.26lb./157g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-01 Cat III 600V Dimensions 12 x 5.3 x 1.2 inches / 306 x 135 x 30mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit pro...

Manufacturer: STANDARD INSTRUMENTS CO LTD Brand: Reed Instruments Model: R5020-NIST

This compact autoranging clamp meter is capable of measuring AC current (40, 400A), AC (4, 40, 400, 600V)/DC (400mV, 4, 40, 400, 600V) voltage, resistance (400Ω, 4, 40, 400kΩ, 4, 40MΩ), frequency, capacitance, duty cycle and temperature (-4 to 1400°F (-20 to 760°C)).Featuring double molded plastic housing, the R5020 includes diode check and continuity functions and a non-contact voltage detector built into the clamp tip. This product includes a calibration certficate traceable to NIST (National Institute of Standards and Technology).

Manufacturer: Johnson / Cinch Connectivity Solutions Brand: Johnson-Cinch Connectivity Solutions

Test Plugs & Test Jacks Rib-Loc Banana Jack

Manufacturer: Hioki Brand: Hioki Model: CT 6500

Clamp on sensor use with the Clamp Logger. Primary: AC 500 A; 40 Hz to 1 kHz. Secondary: AC 1mV/A. Maximum input current: AC 600 A. 46mm diameter.

Manufacturer: GE Fanuc Brand: GE

GE Fanuc Operator Panel Datapanel DP50 IC752DTX500-BC

Manufacturer: KKmoon Brand: KKmoon

Vici VICHY VC4105A Digital Earth Ground Resistance Tester Earth Voltmeter Ohmmeter 2KΩ 200V w/ LCD BacklightFeatures 1. Earth resistance range: 0-2000Ω. 2. Earth voltage range: 0-200V. 3. LCD display with 32mm high figure 4. Withstand voltage: 3700V AC between the circuit and body cover (for 1 minute). 5. Overload protection: At earth voltage range, Max voltage can be 450V AC (for 1 minute). At earth resistance range, Max voltage can be 280V AC for (10 seconds). 6. Test lock and data hold function. 7. White LCD backlight.Technical Data Earth resistance: 3 Wires: 20/200/2000Ω; 2 Wires: 2000Ω 3 Wires: 20Ω ±(2%rdg+0.1Ω) ; 200Ω/2000Ω ±(2%rdg+3dgt) 2 Wires: 2000Ω ±(2%rdg+5dgt) Earth voltage: 200V ±(1%rdg+5dgt)Special Function Working temperature: 0°C—40°C ; relative humidity < 80% Storage temperature: -10°C—50°C ; relative humidity < 85% Best measuring temperature: 23°C±5°C ; relative humidity < 75% Overload protection Operating frequency: About 820Hz Operating Current: About 3mA Operation method: Manual range Max. display: 1999General characteristic LCD size: 75*52mm Meter weight: 800g (including the battery Meter Size: 175×115×65mm Power source: 6 * 1.5V Aa battery(not included) Meter color: Body: dark grey and orange Package Size: 31 * 24 * 11.5cm / 12.3 * 9.4 * 4in Package Weight: 2155g / 4.8lbWhat is in the box 1 * VC4105A Digital Earth Ground Resistance Tester 1 * Supportive earth bar 3 * Alligator Clip Test Lead (green, yellow, red) 1 * English Manual 1 * Carrying Bag

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N4864A

The Keysight N4864A vertical probe tip-to-PCB adaptor is made to solder into a PCB as test points to minimize ground inductance and maximize signal fidelity. The package contains two adaptors.

Manufacturer: Hantek Electronic Co.,Ltd Brand: Hantek Model: DDS 3X25

This is a high performance, low Cost PC Based USB Function/Arbitrary Waveform Generator. It uses computers to Simulate Sensors and Real Signals. You can Generate Arbitrary Waveform Signal with or without a computer. Specs: 200 MSa/s Sample Rate, 12 bits Vertical Resolution, 25MHz Arbitrary Waveform Output (Up to 75 MHz for Sin waveform , Expanding Channels by Connecting Multiple Units to One Computer, 50 MHz Frequency Counter, 12 Bits Pattern Generator, P&P USB Interface, No External Power Required, Windows NT/2000/XP/Vista/ Windows 7 OS Supported, Sleek and Compact Design, Easy to Carry, Second Design supported (Labview\VB\VC\Delphi\C++), Second Design Samples Provided, CE Approved

Manufacturer: Deltron Brand: Deltron

Test Plugs & Test Jacks INSULATED BLACK

Manufacturer: Made in usa Brand: awasy2415

(31-1-7)& FREE! Sellers: Add a FREE map to your listings. FREE!Exported By ExportYourStore