Electrical Testing - Page 39

Manufacturer: Retevis Brand: Retevis Color: Black

The best tools for the signal testing and radio maintenance also can test CTCSS DCS Description This Retevis Meter using dot-matrix LCD display is designed to detect frequency, CTCSS and DCS of radio device. This Meter adopts the antenna inductively measure, without the use of the feeder, direct detect, convenient and quick. Specification: Frequency range: 50MHz~2.4GHz Detect CTSS/DCS code within a second Auto power off: 30 seconds Antenna : Retractable antenna 6F22 9V battery(include) Operation: the only one button with all functions Long press -- boot Quickly press -- reset (to test) Then long press -- shutdown Long press the power button can select 0.1K or 1K 0.1K will display 4-digit; 1K will display 3-digit Uplink displays frequency; downlink displays CTCSS/DCS Front and rear shells are made of Frosted iron shell which eliminating the fissile and fragile trouble from plastic housing Notes: Its LED will light up until only the CTCSS is measured; if there is no CTCSS, the red light will not light up. Package including 1 x Retevis R-511 frequency counter(Include 9V battery)

Manufacturer: Actuant Brand: Sperry Instruments Model: TT64200

Cable Tester, Includes Coax and Cat 3-6 Patch Cords and Installed Cables For Proper Wiring, Test For Opens, Shorts, Miswires, Reversals, and Shield Continuity.

Manufacturer: AEMC Brand: AEMC Model: MN251

The Model MN251 is the latest in compact AC current probes. It is designed to meet the most stringent demands in industry and electrical contracting. Model MN251 meets EN 61010, 600V, Cat III safety standards and is CE Marked and UL approved for Canada and United States. The Model MN251 has a 0.78" jaw opening and accommodate conductors up to 250MCM. The unique hooked jaw design facilitates clamping and hooking onto conductors. Polycarbonate materials and ultrasonic welding are used throughout to ensure ruggedness and overall lasting reliability. The Model MN251 uses tape wound cores to further improve its high and low end performance. Rated at 200A RMS it has a measurement range to 240A RMS. Measurement range of 0.5 to 240AAC. Designed for DMMs, loggers, recorders and oscilloscopes. 40Hz to 10kHz response. 10mVAC/AAC output signal. Transformation Ratio: Voltage output. Overload: 240A for 10 min ON, 30 min OFF. Limit Operating Conditions: 200A permanently to 1kHz; Derating above 3kHz: 200A x (1/0.333F), F in kHz. Crest Factor: 3 at 200A RMS with an error (due to CF) of 4 percent. Working/Common Mode Voltage: 600Vrms. Output Termination: 5 feet Lead. Operating Temperature: 14 to 131 degree F. Storage Temperature: -40 to 158 degree F. Operating Relative Humidity: 10 to 35 degree C 85 percent RH (without roll-off above 35 degree C). Measures 5-15/32" length by 2" width by 1-11/64" height. Polycarbonate Material: Polycarbonate with fiberglass charge, UL94 V0.

Manufacturer: FLIR Systems Brand: Extech Model: TL625

100MHz High Voltage Oscilloscope Probe,. 100X probe ratio. 1.2 meter cable length. 10M ohm input impedance, 17.5pF Capacitance. 2000V max. and 15 to 35pF compensation range. Includes probe tip, ground lead and adjustment tool.

Manufacturer: FLIR Systems Brand: Extech Model: TL625

100MHz High Voltage Oscilloscope Probe,. 100X probe ratio. 1.2 meter cable length. 10M ohm input impedance, 17.5pF Capacitance. 2000V max. and 15 to 35pF compensation range. Includes probe tip, ground lead and adjustment tool.

Manufacturer: Hioki Brand: Hioki Model: 3030-10

The Hioki 3030-10 HiTester analog multimeter is an average-sensing, manual-ranging meter for measuring voltage, resistance, and current in electrical testing applications. The meter comes with a set of detachable test leads. This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform. It is a manual-ranging meter that requires the operator to choose the appropriate operating range for the property being measured. The battery tester feature determines the amount of charge remaining in 1.5V batteries. A thermistor probe (sold separately) can be connected to the meter to take temperature measurements. The meter can also test the functionality of LED lights. A 0.5-amp/250V fuse is installed to help protect the operator from electric shock due to transient voltage. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). The meter can survive falls of up to 1 meter to a hardwood or concrete floor. It comes with a carrying case for transport and storage.SpecificationsMaximum AC voltage input600 volts (V)Maximum DC voltage input600VMaximum resistance detected3 kilohmsMaximum current detected300 milliampTemperature measurement range-20 to 150 degree Celsius/-20 to 300 degrees FahrenheitPower supply1.5V AA batteries (two, installed)Weight280 g/9.9 oz.Standards metInternational Electrotechnical Commission (IEC) safety standard 61010:2001; European Commission (CE) marked; European Union EMC (EN) EN61326Dimensions141 x 95 × 39 mm/5.55 x 3.74 x 1.54 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to ...

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 2706B

The B&K Precision 2706B digital multimeter (also known as a multitester) is an average-sensing, manual-ranging meter that measures current, voltage, temperature, frequency, and capacitance, and performs diode and continuity tests in electrical applications. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit's diodes. Temperature measurements are taken using a K-type thermocouple (included). The LCD is backlit for readability in low light. It displays the present measurement or the highest or lowest reading in a session, for tracking sudden changes in readings. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 30 minutes of nonuse to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A magnetic strap is included for hanging the meter from a metal door or surface for hands-free use. This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform. It is a manual-ranging meter that requires the operator to choose the appropriate operating range for the property being measured. The LCD has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 1000V, which covers large household appliances and devices connected to a fixed power supply (such as refrigerators and air conditioners), Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply), and Pollution Degree 2 f...

Manufacturer: Comark Brand: Comark

This Comark Type K thermocouple kit contains a KM28 thermometer. This also comes with a CRS/5 rubber boot. Features:Type K thermocouple thermometer Water resistant and easily cleanable with membrane keypad Supplied with CRS/5 protective boot Sub-miniature connector Accepts a wide range of type K probes Auto switch-off to save battery life Specifications:Measurement Range:°C -40 to 500 °F -40 to 1000 Instrument Accuracy:-30°C to +110°C, -22°F to +230°F ±1°C/2°F Full Range ±3% of reading Resolution 0.1° to -190°C/-374°F, 1° above Additional Information:Operating Temperature Range: 0°C to 50°C, +32°F to +122°F Battery type 9V IEC 6LF22 alkaline Battery Life 300 Hours Model #: KM28B 630506

Manufacturer: Goodman Brand: Goodman Color: Multicolored

Specifications: H.P.: 3/4. Speeds: 1. Volts: 115. Amps: 1.90. Rotation: CWLE. RPM: 3000. Bearings: Ball. Enclosure: Open. Motor Type: Shaded Pole. Includes: Gasket. Replaces: A.O. Smith 0131M00002P, A.O. Smith 0131M00002S, Fasco 7058-1407, Goodman 119276-00, Goodman 0131M00002S, Goodman 0131M00002P, Jakel 0131M00002P, Jakel 0131M00002S, J238-112-1213, Rotom FB-RFB276, Rotom RFB276.

Manufacturer: General Tools Brand: General Tools Model: TSP200RC

General TSP200RC Twirling Sling Psychrometer, Red Spirit (°C). General Tools TSP200RC Sling Psychrometer is the NEW Twirling Sling Psychrometer. Choose from mercury or red spirit filled thermometers. To measure temperature and humidity.