Electrical Testing - Page 396

Manufacturer: Instek Brand: GW Instek Model: GLA-1032

The GLA-1000 Series is a palm-sized PC based logic analyzer with functionality matching that of a desktop device. 200 MHz internal sampling rate and advanced trigger settings provide high accuracy and lengthy data analysis results. Features, such as data-loss-less compression, enable qualifier, and serial bus protocol analyzer, provide you with a tool to adequately analyze today's complex digital systems. All data and configurations can be saved into a PC for further data analysis. The GLA-1000 Series operates over a high speed USB 2.0 connection and is fully powered by the USB bus. Signal analyzer: I2C, RS-232C protocol analyzer and signal statistics. File export: signal data, operation setting and display image. USB 2.0 supported(1.1 compatible). Channels: 16. Memory total/per channel: 4Mbits/128kbits. Operating system: Win XP/Win Vista /Win 7. Timing analysis: maximum 200 MHz. State analysis: 0.001Hz to 100 MHz. Maximum input voltage: +/-30V. Impedance: 500 kiloohm/10pF. Data Skew: greater than 1.5ns. Static current consumption: Maximum 200mA. Working current consumption: Maximum 400mA. Static power dissipation: Maximum 1W. Working power dissipation: Maximum 2W. Interface: USB. Working voltage: 4.5V to 5.5V. Operating temperature: 0 to 50 degree C. Storage temperature: -40 to 80 degree C. Measures 137mm width by 39mm height by 102mm depth.

Manufacturer: Instek Brand: GW Instek Model: LCR RS232

Instek LCR RS232 Option RS232 Factory Installed.

Manufacturer: DROK Brand: DROK

Parameters: Measure voltage: DC 0-33.000V Power Supply: DC 5-30V (Separate powered) Display: five 0.36" digital LED Tube Display Color: Blue Refresh rate: 5 times per second Measuring Accuracy: +/-(0.3‰+2 digit) Dimensions:48mm x 29mm x 21mm Cutting Size: 45mm x 26mm Operating temperature: -10°c to 65°c Temperature coefficient: less than 25PPM /°c With reverse connection protection Wiring: Red: Power Supply+ (DC 5-30V) Black: Power Supply -, Measure - Green: Measure + (please refer to the wiring reference for more detail) NOTE: The meter needs independent power supply(DC 3.5-30V). When the black wire and red wire are connected to the power supply, the meter will display 0.000 (when the measuring wire(yellow wire) is dangling, the meter will display one or two base). Then yellow wire and black wire can be connected to the measurement circuit. The measured voltage range is DC 0-33.000V. Package Includes: 1x Digital LED Voltmeter

Manufacturer: DROK Brand: DROK Model: 090043 Color: Red

Features: Measurement Range: DC 0-3.0000A Power Supply: DC 3.5-30V Display: five 0.36" LED digital tube Display Color: Red Refresh Speeds:> 3 times per second Measurement Accuracy: ± (0.5 ‰ + 2 digits) Operating Temperature: -10 °c ~ 65 °c Dimensions: 48 x 29 x 21mm Temperature Coefficient: less than 50PPM / °c Built-in shunt, don't need extra shunt Anti-reverse protection Wiring: PWR-Red(thin): power supply+ (3.5-30V DC) PWR-black(thin): power supply- (when powered by measuring circuit, connect nothing) Red(thick): current measurement signal input+ Black(thick): current measurement signal input- (please refer to the pictures for more details) Note: This meter needs separate power supply, the power is DC3.5-30V. Package Includes: 1x Digital Ammeter

Manufacturer: Fantech Brand: Fantech Model: 9800000 Color: Silver

Fantech RSK Series Backdraft Damper.

Manufacturer: Klein Brand: Klein Tools Model: 11045 Color: Yellow

This compact, lightweight wire-stripping and cutting toolis designed to cut 10-18 AWG solid wire. The precision-ground stripping holes cleanly cut wire and aid in easy removal of insulation. A narrow nose helps this tool fit easily into tight places. Easy-to-read wire gauge markings on both sides for stripping in either direction. Our Color-coded handles: red indicates stranded wire, yellow indicates solid wire. Do NOT use to cut steel wire or bolts.

Manufacturer: PortaPow Brand: PortaPow Model: PortaPowStMonV2

All new improved version 2 released October 2014 This multi-meter plugs directly into any USB socket and allows you to connect any USB cable into it for charging and data transfer. It displays on screen the voltage, current and wattage which is being output, acting as both a volt and amp meter. All three are shown simultaneously, there is no need for the display to change between what is shown on screen. It is powered inline so no battery is needed, and uses low resistance components with

Manufacturer: GEREE Brand: GEREE Color: LCD Display

Feature: 5 digit large lcd screen , display of large and clear. Use the common aa batteries, without external power supply, and the replacement of the battery is convenient. Press the pause key, can pause / count, then press the pause key, and restoring counting. Input using ordinary contact signal, selecting the sensor is simple and convenient, accurate and reliable count. Counting speed: 20 times / sec . Resetable zero: panel / external dual use . Seismic design, effectively prevent data loss . No mechanical abrasion, reliable work, long service life . Specification: Power: 1.5v AA cell(battery not include) Count range: 0----99999 Reset minimum pulse width：0.1s Count the highest frequency: 20hz Use environment temperature: - 5c--40 °c Count the minimum pulse width: 10ms Size: 64 x 38 x 38 mm Hole size: 61 x 36 mm Contact on maximum resistance: ≤10kΩ Open contact minimum resistance: ≥500kΩ Package include: 1 x Digital 5 Digit LCD Punch Counter 1 x Counter bracket 1 x proximity switch 1 x switch bracket 1 x strong magnet

Manufacturer: District Brand: District Model: True Pink/White DT228 M Color: True Pink/White

This retro look is always a comfortable choice. Made of 4.8 oz, 50/50 ring spun cotton/polyester. Coverstritch detail at shoulder and hem.

Manufacturer: DROK Brand: DROK Model: 300006 Color: Red/Blue Display

Technical Parameters: Display color: Red+Blue Display mode: Dual 0.28" LED digital 4 bit tube Refresh rate: About 200 ms/time Dimensions: 48 x 29 x 21 mm (L*W* H) Cutting size: 45 x 26 mm (L*W) Supply voltage: DC 3.5-28V Lead wire length: 14 cm (5-wires) Measurement range: DC 0-999.9mA-3.000A(current); 0.00-33.00V(voltage) Operation temperature: -10 degrees~65 degrees Measurement accuracy: ± (0.3% + 2 digits) Net weight : 22g Display Description: Voltage measurement range: 0.00-33.00V; the minimum resolution is 10mV. Current measurement range: 0-999.9mA-3.000A. when the measuring current is below 1A, it display ***.*mA, the resolution is 0.1mA; when the measuring current is higher than 1A, it display *.***A, the resolution is 1mA. Wiring Instruction: RED(VCC): Power input+, 3.5-28V (NOTE: If the measuring signal is lower than 28V and have abundant power supply, it can be used as power supply for the meter. black wire and yellow wire are contacted together to use) Black(GND): Power input- , Measurement signal- (3.5-28V) Yellow(VIN): Measurement signal+ (0-33.00V) RED(I+): Current input+ (must be connected in series between Power Supply Negative and Load Negative) Black(I-): Current input- (must connected in series between Power Supply Negative and Load Negative) Package Includes: 1x 0-33.00V/0-3.000A Volt Amp Meter