Electrical Testing - Page 404

Manufacturer: Pomona Electronics Brand: Pomona Model: 3542-2

The 3542-2 is an Insulated Panel Mount Pin Tip Jack in red. It accepts 0.080" (2.03mm) pin tips and mounts panels up to 0.250" thick. Voltage rating is 30 Vac/60 Vdc for handheld applications, and 1500 Vrms rated for handsfree applications. Current rating is 5 amps.

Manufacturer: GENERAL ELECTRIC Brand: GE

General Electric A0-91 Panel Meter (H6)

Manufacturer: bayite Brand: bayite

Main Specifications: Working voltage: DC 6.5 ~ 100V Measuring Accuracy: 1% Power Consumption: 0.2W Measurement speed: 2 times/s Store Energy data when power off. Can be reset to 0. The blue backlight can be turned on/off manually Test Range and Display format: 1.Active Power test range: 0~2kW 2.Energy test range: 0~9999kWh 3.Voltage test range: DC 6.5~100V 4.Current test range: 0~ 20A Precautions 1. This module is only suitable for 6.5~100V DC power. 2. Applied load should not exceed the rated power. 3. Wiring order cannot be wrong. 4. This module is suitable for indoor, please do not use outdoor. Packing including: 1x DC 6.5-100V 20A Power Multimeter

Manufacturer: Mastech Brand: Tekpower Model: MS2002_M920 Color: MS2002+M920

This is a package sale, Matsech MS2002 and Tekpower M920 Line splitter. This Mastech made and OEM by Sinometer, MS2002 clamp on meter is designed and engineered for both industrial and home use, it features AC amps to 200 A, which accurately measures AC current without opening or otherwise disturbing the circuit, it also measures AC/DC voltage up to 600 V, ideal for on-the-job testing and trouble-shooting. Continuity check with audible signal. The Tekpower Line Splitter M920 is a perfect wire separator that virtually splits the wire without breaking it. Just clamp it on, you can measure the current easily. Specifications: ACA: 0.0 - 2.0A (0.001 A ± 2.0% + 5) - 20.0A(0.01 A ± 2%) -200.0 A (0.1A) ± 2.0%; ACV:0- 600V(Resolution 1V) ± 1.5% + 5; DCV:0-60 V(resolution 1 V) ± 1.0%; Resistance:0-200-2K ohm ± 1.0%; Back Light and Data Hold Audible Continuity < Approx 50 Ohms. Includes: 1 X MS2002 Clamp Meter 1 X M920 Tekpower Line Splitter 1 X Carrying Bag 1 X Pair of Test Leads 1 X User's Manual Book and Battery ( For test only) Tekpower is a registered trademark in the United States, any unauthorized use of our trademark is a violation of both Federal and State trademark laws and could subject to liability for damages and penalties.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3738

Provides users with the necessary test leads to begin using one's digital multimeter (DMM) to the fullest. Silicon jacketed test lead wire. Kit includes: test lead, Shth P-Shth RaP-silicon 0.82, 100 cm (40"): (1) black, (1) red; compact probe body, 2mm/8-32 tip: (1) black, (1) red and medium alligator clip, insulated with 8-32 threaded: (1) black, (1) red. Applications: R and D laboratories, production test stations, field service and repair, educational test benches. RoHS (2002/95/EC) compliant.

Manufacturer: Tektronix Brand: Tektronix Model: TPP0051-TEKTRONIX

TEKTRONIX TPP0051 PASSIVE PROBE, TBS1000B SERIES

Manufacturer: Craftsman Brand: Craftsman Model: 82007

When it is important to have the right information, it is best to get it yourself using the Craftsman multimeter w/ NCV tester. This accurate tester uses a large, easy-to-read LCD digital display and measures AC/DC voltage, current, resistance, capacitance, temperature and frequency. It is compact sized, affordable and uses Type K temperature measurements. The Multimeter w/ NCV tester also includes a Non-Contact Voltage (NCV) detector and a convenient flashlight. It has an auto power off feature and runs on two AAA batteries. It comes fully equipped with a probe and test leads. The maximum voltage is 600 volts and the unit weighs less than a pound. The meter, of course, comes with the Craftsman guarantee.

Manufacturer: Extech Brand: Extech Model: TL810

EXTECH INSTRUMENTS TL810 TEST LEAD KIT, ELECTRICAL, 1KV

Manufacturer: Amprobe Brand: Amprobe Model: DM78C

The Amprobe DM78C digital multimeter is an average-sensing, auto- or manual-ranging multimeter for measuring voltage and resistance in electrical testing applications. The attached test leads measure alternating current (AC) voltage and direct current (DC) voltage to 600 volts (V) and resistance to 34 megaohms. The meter measures 5.1 x 3.1 x 0.6 inches (H x W x D, where H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back), and it can be carried in a pocket when not in use. It has a liquid crystal display (LCD) that shows readings both in digits and on a 34-segment bar graph. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit's diodes work properly. The hold function keeps a reading on the display, even after the meter is disconnected. An auto power-off mode turns off the unit after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries.

Manufacturer: Amprobe Brand: Amprobe Model: PM51A

The Amprobe PM51A is a shirt pocket sized meter that weighs less than 3 oz. and is only 3/8” thick. This meter offers full functionality with featuring like AC and DC voltage to 600V, capacitance to 3000 uf, resistance to 40 megohm, frequency to 1 MHz, continuity with beeper, and diode test. The PM51A offers seven different measurement functions with 27 full ranges of measurement. It features and oversized digital display with large digits and annunciators. Even with this meter’s small size it is fully safety rated to CAT III 300 V, CAT II 600 V and is UL listed. There is no other meter with such performance and high safety ratings.