Electrical Testing - Page 427

Manufacturer: WDQY Brand: WDQY

The shipment will be arranged in 1-3 working days( not including customized product), and takes about another 3-9 working days to reach you.

Manufacturer: WDQY Brand: WDQY

Frequency response: 30Hz to 2000Hz. - Sensor: Triple Axis (X, Y, Z). - Range: 20/200/2000 mG,2/20/200μT. - Data hold (HOLD). - Maximum hold (MAX). - Minimum hold (MIN). Display: 4 digits Triple LCD display, . - Range: 20/200/2000 mG,2/20/200μT. - Resolution: 0.01/0.1/1 mG or 0.001/0.01/0.1 μT. - Frequency response: 30Hz to 2000Hz. - Sensor: Triple Axis (X, Y, Z). - Accuracy: 20 mG /2μT±(3.0%+30dgt) at 50Hz/60Hz. ± (2.5%+5dgt) at 50Hz/60Hz. ±(5%+5dgt) at 30Hz/2000Hz. - Over load: LCD display "OL". - Sample rate: 2.5 times per second. - Battery: 9V NEDA 1604, IEC 6F22 or JIS 006P. - Battery life: Approximate 100 hours. - Operating temperature & humidity: 5Cto 40C,below 80% RH. - Storage temperature & humidity: -10C to 60C, below 70%. - Weight: About 230g. - Dimensions: 173(L)*80(W)*32(H) mm. - Accessories: User's manual, No battery, Carrying case. MINI USB 4P(MALE) to USB A Type cable, CD disk (TM-192D) The shipment will be arranged in 1-3 working days( not including customized product), and takes about another 3-9 working days to reach you.

Manufacturer: TheBrainDriver Brand: TheBrainDriver Model: v2.0 Color: Blue

tDCS - Safety Designed Transcranial Direct Current Stimulation (tDCS) Device with 4 Selectable Current Levels, Advanced Circuitry, LED Lit Screen for Safe Nighttime Use. TheBrainDriver Deluxe tDCS System Includes Everything You Need to Get Started; Main Unit, Comfortable Electrode Positioning Headband, Color-coded Wire set, 2 Color-coded Electrodes, 2 Pairs of Sponges, 9 volt Battery, Storage Case. Device Output Selections; 0.5mA, 1.0mA, 1.5mA, 2.0mA. Plus, Numerous Safety Features; Battery Level Indicator, 20 & 30 Minute Timer with Automatic Shut-Off at End of Session, Automatic Shut-Off When Not In Use, Automatic Shut-off when Not Properly Attached, Overload Protection. Pocket-Sized & Very Portable for Easy Travel!

Manufacturer: Amprobe Brand: Amprobe Model: SM-10

The Amprobe SM-10 type 2 sound meter measures sound pressure levels (spl) in environmental quality control and acoustic analysis applications, such as when checking compliance with noise pollution regulations and health and safety codes. It has two measurement settings. The “A” weighting is for taking measurements where there is low to moderate ambient noise, such as in an office. The “C” weighting is for taking measurements where there is loud low-frequency background noise, such as in machine shops. The meter offers a choice of two response speeds. The fast 125-millisecond response setting measures the average sound level in environments with steady ambient sound, and the slow 1-second response setting measures peak noise levels in environments with fluctuating ambient sound. The 1/2-inch condenser microphone comes with a windscreen to shield the microphone in outdoor conditions with wind speeds over 10 m/sec (22.3 mph). The maximum or minimum reading mode displays the highest or lowest reading in a session to track sudden increases or decreases in measurements. The data hold function keeps a reading on the display even after the meter is disconnected or the measurement changes. The meter's backlit liquid crystal display (LCD) is readable in low light and shows measurements in 0.1 dB increments up to 4 digits. The auto-power off function turns off the unit after 5 minutes of non-use to conserve battery life.Specifications Frequency range 31.5 hertz (Hz) to 8 kilohertz (KHz) Sound level measurement range, “A” weighting 30 to 130 decibels (dB) Sound level measurement range, “C” weighting 35 to 130 dB Dynamic range 50 dB Power supply 9V NEDA 1604, IEC 6F22, or JIS 006P battery (one, installed) Standards met International Electrotechnical Commission (IEC); American National Standards Institute (ANSI); Japanese Industrial Standards Commission (JISC); European Conformity (CE); N10140 Australian Weight 0.5 lb./233 g Meter dimensions 7.8 x 2.2 x 1.5 inche...

Manufacturer: Fluke Brand: Fluke Model: FLK-T3000 FC KIT

' Temperature Module, Wireless Temperature Monitoring, K Thermocouple, -328 Degrees to 2501 Degrees Temp. Range (F), Probe Connector Mini, Wire Length 3 ft., -200 Degrees to 1372 Degrees Temp. Range (C), Accuracy 0.50 Percent +/-0.5 Degrees C, For Use With FC 3000 Series Multimeter or PC3000 Series Adapter, Calibration Certificate Available Separately, Includes Bead Probe, Magnet Strap, Information Pack, Manufacturers Warranty Length 3 yr. '

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N2843A

The Keysight N2843A low-cost passive probe provides a 10:1 attenuation and features a high input resistance of 10 M?. The probe can be adjusted for low-frequency compensation and high-frequency compensation. For the best measurements you should compensate your probe to match its characteristics to the oscilloscope. Probe ID is included. Compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 1 M? input. The N2843A is a replacement of the N2890B. The old and new replacements are 100% form, fit, function, and price equivalent to the products they replace.

Manufacturer: Made in usa Brand: awasy2415

NEW OLD STOCK IN DIRTY BOX(ZA7-7-7)Exported By ExportYourStore

Manufacturer: Made in usa Brand: awasy2415

NEW OLD STOCK IN BOX(ZF00-00-00)Exported By ExportYourStore

Manufacturer: Made in usa Brand: awasy2415

&new old stock w/o box(EA1-2-14) FREE! Sellers: Add a FREE map to your listings. FREE!Exported By ExportYourStore

Manufacturer: Made in usa Brand: awasy2415

NEW OLD STOCK IN DIRTY BOX(ZP1-3-1)Exported By ExportYourStore