Electrical Testing - Page 434

Manufacturer: Accuenergy Brand: Acuvim L Model: Acuvim-CL-M-60-5A-P2 Color: DIN Rail Mounted Option

Versatile & intelligent multifunction power and energy meter with 0.5% accuracy and built-in Modbus-RTU via RS485, LCD display. The Acuvim-CL is ideal for monitoring energy data from panel. All data can be read directly from LCD display and Modbus-RTU communication protocol. The Acuvim-CL is UL and CE approved, and comes with a class-leading 5 year warranty.

Manufacturer: Vetus Brand: Hantek

Feature : General Introduction for DSO4000C series: 2 Channel Digital Oscilloscope.1 Channel Arbitrary/Function Waveform Generator. The Keys for osilloscope and waveform generator is seperated for convenient to operate it simultaneously. Oscilloscope:100MHz Bandwidth, 1GSa/s Sample Rate.25MHz Arbitrary waveform generator, 12 bits resolution,200MHz DDS,7 inch 64K color LCD display, Resolution 800x480. Specification: Parameters: *Model:DSO4102C 1.Oscilloscope *Sample Rate:Sampling Rate Range:1GSa/s;Equivalent Sample Rate:25GSa/s 2.Acquisition Modes *Normal:Normal data only *Peak Detect:High-frequency and randon glith capture *Average:Wavefom Average, selectable 4,8,16,32,64,128 3.Horizontal *Sample Rate Range:1GS/s *Waveform Interpolation:(sin x)/x *Record Length:40K *SEC/DIV Range:4ns/div to 40s/div 4. Vertical *Vertical Resolution:8-bit resolution,all channel sampled simultaneously *Bandwidth:100MHz *Rise Time at BNC(typical):3.5ns 5.Trigger System *Trigger Types:Edge,Video,Pulse,Slope,Over time, Alternative *Trigger Source:CH1,CH2,EXT,EXT/5,AC Line *Trigger Modes:Auto, Normal, Single 6.Signal Source Mode *Waveform Impedance:DC-25MHz *Sample Rate:200MHzDDS *Output Waveform:Arbitrary wave/square wave/sine wave/triangle wave/trapezoidal wave/pulse wave/DC *Frequency Resolution:0.1% *Waveform Depth:4KSa *Frequency Stability:＜30ppm

Manufacturer: Fluke Corporation Brand: Fluke Model: 4696001 Color: Multicolored

The Fluke offers advanced troubleshooting performance. The iFlex flexible current probe allows for easy measurement around wires in tight spaces. In addition, all three clamps are now part of the Fluke Connect family of wireless test tools.

Manufacturer: Amprobe Brand: Amprobe Model: CT238A

The Amprobe CT238A current clamp measures AC or DC current to 30 amp without touching or interrupting the circuit. The Hall effect clamp has two jaws that fit around a 0.75" (19 mm) conductor. It converts a high-current signal to a low-level millivolt signal so it can be read by a testing device. The zero adjust function compensates for changes in output voltage due to environmental conditions. The clamp attaches to a compatible testing device, such as a digital multimeter, with a 59-inch, 1.5-meter lead. A finger guard on the body of the meter helps protect fingers from shock. The clamp operates on one 9V battery (included). It weighs 0.64 pounds (290 g) and measures 2.2 by 8.3 by 1.2 inches (55 x 210 x 30 mm, H x W x D, where H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; and D is depth, the horizontal distance from front to back). It meets applicable European Conformity (CE) directives.Clamp meters (also called clamp-on meters) measure electrical current without cutting through wires or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp meters diagnose problems in electrical equipment, wiring, and power supplies. The meter's current clamp has two jaws that fit around a conductor to take measurements. All clamp meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages determine meter choice. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a l...

Manufacturer: Mueller Electric Brand: Mueller Electric

Test Clips Black Mini-Plgr Clip

Manufacturer: Vetus Brand: Hantek Color: Grey

Features Good mechanical design with small size which is easy for carrying. The outer case is made by the same material with iPad - Anodised aluminium. It has great heat resistance and abrasive resistance with beautiful appearance. The hardness of aluminium alloy surface is greatly improved. 4 isolated channels oscilloscope, 1GSa/s real time sampling rate, 2mV-10V/DIV high input sensitivity and large input range, 70MHz high bandwidth. The waveform data could be output to EXCEL,BMP,JPG. Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display. FFT spectrum analyzer. One computer could connect with multiple oscilloscopes, expand the channel number easily. Provide secondary development library DLL; Provide Labview\VB\VC\QT developing examples. Specifications Brand: Hantek Model: Hantek6074BE Channel: 4 Isolated Channels Bandwidth: 70MHz Input Sensitivity: 2mV/div~10V/div Sampling Rate: 1GSa/s Material: Metal + Plastic Item Size: Approx. 210 * 125 * 37mm / 8.3 * 4.9 * 1.5in Item Weight: Approx. 458.8g / 16.2oz Package Size: Approx. 25 * 18.5 * 11cm / 9.8 * 7.3 * 4.3in Package Weight: Approx. 1320g / 46.6oz

Manufacturer: Hioki Brand: Hioki

Easy, wireless collection of temperature and humidity - the ideal logger for managing production plants and agricultural sites. Hioki Memory HiLoggers are high-speed data loggers for recording multiple channels of voltage, temperature, resistance or humidity signals, some models providing complete isolation between channels and strong noise resistance. The Hioki LR8514 Wireless Humidity Logger provides easy, wireless collection of temperature and humidity data, and is the ideal tool for managing the environmental condition of production plants and agricultural sites. The LR8514 alone is not capable of making measurements. Only the temperature and humidity sensors affect the measurement accuracy and are subject to calibration. The LR8514 logger does not require calibration. Countries and regions where wireless operation is currently supported: Japan, U.S.A., Canada, EU, Norway, Switzerland, Turkey, Russia, Singapore, Thailand, Vietnam, and India. Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION.

Manufacturer: Schneider Electric Brand: Schneider Model: METSEPM1000

POWER METER PM 1000

Manufacturer: Megger Brand: Megger Model: ICLAMP

The Megger ICLAMP current clamp is an accessory for performing attached rod technique ground resistance tests with a Megger DET4TC2, DET4TCR2, or DET3TC ground resistance tester (sold separately). The clamp permits the separation of test currents in a parallel-grounded system, enabling the grounds to be tested without de-energizing the system. The ICLAMP is an accessory for use with Megger DET4TC2, DET4TCR2, and DET3TC series ground resistance testers.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

Label Tape Cartridges (18 mm) for Z721D Barcode Printer. 5 tapes, 18 mm wide, 8 m long