Electrical Testing - Page 49

Manufacturer: Klein - Geneva Supply Brand: Klein Tools Model: CL1200

Auto-ranging clamp meter measures AC/DC voltage, AC current, resistance, capacitance, frequency and duty cycle. Also tests non-contact voltage, diodes, and continuity. This meter comes with a CAT IV safety rating.

Manufacturer: Ideal Brand: Ideal Industries Model: 33-866

The IDEAL Test-Tone-Trace VDV Kit is an all-in-one testing solution for identifying wiring errors and locating cables in Voice/Data/Video (VDV) installations. Designed for use in LAN, Telephone, Coaxial Video, Security, A/V, and other general coax or twisted pair applications, this kit performs the essential cable testing functions required by installers and system technicians. The VDV unit features an LCD screen to display Pass/Fail results and notification of wiring errors which require repair. The built in Tone Generator has 4 distinct tones that can be used to trace coax, RJ-45 and RJ-11 cables, plus any de-energized copper cable including speaker wires, alarm cables, and electrical wires. The Amplifier Probe detects tone signals generated from the VDV unit for cable identification and location.

Manufacturer: Extech Instruments Brand: Extech Model: 380405

Capacitance Decade Box The Extech 380405 Capacitance Decade Box is very popular for product design testing and calibration because it can be substituted into a circuit and function in the place of any component with a standard value quite easily. Alternatively, it can also be used to identify the best value for circuit operation and then read that value from the switches. Then, a capacitor of the size indicated by the decade box switches can then be put into the circuit. The concept of the decade box works well with a number of component types, greatly accelerating the trial and error process. However you are likely to find that the arrangement of switches can vary. This device measures 4.6 x 5.7 x 1.4" (H x W x D), and the case may be grounded separately. Three binding posts permit isolated substitutions. The 380405 comes with a one-year limited warranty.

Manufacturer: 3M Brand: Scotch-Brite Model: SPP12

Prepares wood, vinyl tile, sheet vinyl, marble, terrazzo and concrete floors for finish applications. These environmentally preferable* pads require only neutral cleaner or water to effectively deep scrub and remove most floor finishes, leaving a clean surface ready for refinishing. The cleaning process is easy, and because there is no slippery residue from strippers, no stripper contact with skin and clothing, and no stripper clean up, the product helps enhance safety and productivity. *Environmentally Preferable Products are defined in the Instructions for Implementing Executive Order 13423, titled “Strengthening Federal Environmental, Energy, and Transportation Management” as products or services that have a lesser or reduced effect on human health and the environment when compared with competing products or services that serve the same purpose. This comparison may consider raw materials acquisition, product, manufacturing, packaging, distribution, reuse, operation, maintenance, or disposal of the product or service

Manufacturer: LONGH Brand: LONGH Model: LONGHC01 Color: Blue

How to operate this panel tester? - Short- circuit alert: when panel voltage was selected wrong, or using a wrong Lvds panel cable, panel digital display will show ''00'' and buzz loudly.Panel tester will shut down immediately by itself. - Restart the tester by disconnecting 12V power adapter and reconnecting it back. Digital display will auto change from''00''- ''55'' according to the number of screen resolutions. - The power button (red button): Press the power button, indicator lights will be lighted. Press the button again, shut down the power supply. So, just press the power button when you want to change panel in your testing. - Change panel supply voltage: press quality change button for 5 seconds to switch the voltage.When the panel tester restart, panel voltage selection will reset to 3.3V, which is useful design. -Backlight Interface : Support standard 6pin interface inverter , which is used for the external LCD panel; Support 5V, which can also be used for future development of various expansion board power supply. -LVDS Output Port: Standard definition of the ordinary driver board / common screen cable . - Press "picture change button" to change tested picture of panel. - Press "quality change button" to change images quality; - Press "auto change button" to set it auto change. -VGA Output : it is for people who wants to apply special test pattern to compare between good screen and test screen. Both LCD screen are display the exact same pattern. -VGA Input: You can apply special test pattern to test LCD screen. Generator will auto turn off when external signal apply to VGA input connector.

Manufacturer: GABOTRONICS Brand: GABOTRONICS

Xminilab Portable Small Mixed Signal Oscilloscope This is the portable version of the Xminilab. The Xminilab Portable is a small mixed signal oscilloscope with an arbitrary waveform generator and protocol sniffer.Features:Mixed Signal Oscilloscope: Simultaneous sampling of analog and digital signalsAdvanced Trigger: Normal / Single / Auto, with rising or falling edge and adjustable trigger levelMeter Mode: Average, Peak to peak and Frequency readoutXY Mode:           Plot Lissajous patterns           See the phase difference between two waveformsSpectrum Analyzer with different windowing options and selectable vertical logHorizontal and Vertical Cursors with automatic waveform measurementsArbitrary Waveform Generator with Sweep on all parametersDisplay options: Persistence, Different grid options, and moreCurve tracer functionIncludes: Header, USB cable and 2 test clip leadsSpecifications:General Specifications:ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROMGraphic OLED display 2.42", 128x64 pixelsEnclosure size: 3.17" x 2.22" x 0.7"Li-Ion Battery 750mAhPDI interface4 tactile switchesUSB connectivity: Windows, Linux, Mac, AndroidLogic Analyzer specifications:8 Digital Inputs, 3.3V / 5V820kΩ input impedanceMaximum sampling rate: 2MSPSFrequency counter: 16MHzProtocol Sniffer: UART, I2C, SPIInternal pull up or pull down.Buffer size: 256Oscilloscope specifications:2 Analog InputsMaximum Sampling rate: 2MSPSAnalog Bandwidth: 200kHzResolution: 8bitsInput Impedance: 1MΩ 15pFBuffer size per channel: 256Input Vol

Manufacturer: Centex Brand: EDI

The EDI Meter is an all-in-one ghost hunting tool built for ghost hunting and paranormal investigators at a price you and your team can afford. Electromagnetic Field Sensor (EMF): The EDI is a sensitive EMF detector. This ultra- low (below 30hz) EMF detector is programmed to analyze the data several times a second to detect any changes in the electromagnetic field around the device. Two LEDs near the sensor change intensity based on the fluctuations picked up. A speaker will also alarm if there is a sharp change in EMF. The speaker can also be toggled on/off by a switch on the device. Temperature: The EDI contains an ambient temperature sensor with a real-time LED display. On the sides of the sensor are two LED lights that alert you when change happens If temperature changes sharply in a short period of time, indicative of something paranormal the device will alert you with rapid blinking of the top red LEDs. Geophone: The EDI contains a very sensitive geophone. Built with an accelerometer, the EDI is programmed to pick up the slightest movements or vibrations on the surface it is sitting on. A small touch on the table the device sits on and the EDI will let you know by lighting up a series of LEDs placed along the bottom. Like a graph the device will light up the amount of LEDs based on the intensity of the vibration or movement. This geophone is sensitive to surfaces the device sits on but not too sensitive as to pick up every movement in the room you are investigating. The geophone can also be toggled on/off by a switch on the device if the device is being used in a hand-held fashion.

Manufacturer: Klein - Geneva Supply Brand: Klein Tools Model: CL1300

This Klein auto-ranging clamp meter measures AC/DC voltage, AC current, resistance, capacitance, frequency, duty cycle, and temperature. It is also designed to test non-contact voltage, diodes, and continuity.

Manufacturer: Fluke Corporation Brand: Fluke Model: TI-CAR CHARGER

For the ultimate flexibility in the field - recharge your thermal imager wherever and whenever you need to. For use with: Ti32, Ti25, Ti10, TiR32, TiR1, TiR

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3667

Replacement attenuator tip assembly for 3.5 mm compact scope probe. 10x Attenuator. 500 MHz Bandwidth. Reference Tektronix 206-0441-00. RoHS (2002/95/EC) compliant. Temperature: -10 to +55 degree C.