Electrical Testing - Page 509

Manufacturer: Ranco Brand: Ranco Model: ETC 112000-000

Ranco ETC-112000-000. 24V SINGLE STAGE COMMERCIAL TEMP. CONTROL NEMA

Manufacturer: Tekpower Brand: Tekpower Model: MS6200

Mastech MS6200 Insulation Tester MS6200 with up to 1000M Ohms resistance measurement. Specifications: 200 Ohms 200M Ohms @ 500V 1000 Ohms @ 1000V Inlcuding: 1 PC of MS6200 1 PC Manual Book

Manufacturer: VELLEMAN INC. Brand: Velleman

Digital Capacitance MeterFeaturesDigital capacitance meter with 3 1/2 LCD display and figure height 0.8 inCapacity measurements: 9 ranges from 0.1pF to 20mFWith zero adjusterComes with holsterSpecificationsRanging mode: manualData hold: noBacklight: noDimensions: 1.2 x 3.6 x 7.4 inchWeight (with battery): 8.5ozPower supply: 9V battery (incl.)Packing: boxAccessories: manual / test leads / holster / batteryAuto power-off: no

Manufacturer: Telemecanique Brand: Telemecanique

This item is new, including original packaging!

Manufacturer: OSTER Brand: OSTER

Electric Countertop Griddle, Full Size, Overall Length (In.) 24, Overall Width (In.) 13-5/16, Overall Height (In.) 4, Max. Pan Size (In.) 10 X 18, Cooking Chamber Size H X W X D 1 In. X 10 In. X 18 In., Cooking Surface (In.) 10 X 18, Holding Capacity N/A, Heat Setting Up To 420 Degrees F, Voltage 120, 12 Amps, 1450 Watts, Polarized Plug, Material Ceramic, Includes Warming Tray, Built-In Grease Channel, Removable Drip Tray, Cool-Touch Handles.

Manufacturer: Lascar Electronics, Inc. Brand: Lascar Electronics Model: DPM 3AS-BL-LASCAR_IT

The DPM 3AS-BL is an ultra-miniature 3 1/2 digit LCD voltmeter with 11 mm (0.43") digit height and LED backlighting. It features a negative rail generator which enables the meter to measure a signal referenced to its own power supply GND. The meter plugs directly into a SIL socket or can be snapped into a panel. Connection to the meter is via two rows of pins. The DPM 3AS-BL is intended to replace the DPM 3, DPM 3S, DPM 3-BL and DPM 3S-BL in many applications, usually requiring only minor circuit modifications.

Manufacturer: Fluke Corporation Brand: Fluke Model: L211

kit includes L200 probe light, TL71 premium DMM test lead set and C75 case. Special value combo pairs the new L200 probe light with one of the most popular test leads by Fluke and a handy carrying case. Small, rugged light easily attaches to any Fluke test probe. Flexible silicone test leads are heat and cold resistant. Zippered case has two inside pockets. Probe light frees both hands for work. 120 hours of battery life. Uses 2 3-volt watch batteries.

Manufacturer: Fluke Corporation Brand: Fluke Model: L211

kit includes L200 probe light, TL71 premium DMM test lead set and C75 case. Special value combo pairs the new L200 probe light with one of the most popular test leads by Fluke and a handy carrying case. Small, rugged light easily attaches to any Fluke test probe. Flexible silicone test leads are heat and cold resistant. Zippered case has two inside pockets. Probe light frees both hands for work. 120 hours of battery life. Uses 2 3-volt watch batteries.

Manufacturer: KKmoon Brand: KKmoon

Vici VICHY VC60B+ Insulation Resistance Tester Megohmmeter Ohmmeter Voltmeter DVM 1000V 2G? w/ LCD Backlight Features: 1. An accurate, reliable and easy-to-use insulation tester 2. Large LCD display, easy to read 3. Strong anti-magnetic and anti-jamming function 4. Full function protection, anti high voltage circuit design 5. Unit symbol display, easy to use 6. High voltage and short circuit input alarm Specifications: Insulation resistance: 250V/500V/1000V 250V 0~200M? ±(4.0%+2) 500V 0~200M? ±(4.0%+2) 1000V 0~2G? ±(4.0%+2) Resistance: 2000? ±(1.0%+5) DCV: 0-1000V ±(1.0%+5) ACV: 0-750V ±(1.5%+5) Special Function: Max.display: 1999 Continuity alarm: Less than 30?±10? Low battery indication Data hold LCD backlight Function protection Input impedance: 1M? Sampling rate: 3 times/Sec. Manual range General Characteristic: Power source: 6 * 1.5V AA battery or external DC 9V power source(not included) LCD size: 75×52mm Weight: 580g (including battery Meter size: 176 (L) x116 (W) x63 (D) mm Color: Dark gray-yellow Package Size: 20.5 * 17 * 7cm / 8 * 6.7 * 2.7in Package Weight: 709g / 1.6lb Package List: 1 * VC60B+ Insulation Resistance Tester 1 * Pair Test Lead 2 * Alligator Clips 1 * English Manual

Manufacturer: TRENDnet Brand: TRENDnet Model: TC-NT3 Color: Silver

TREND net's VDV & USB Cable Tester, model TC-NT3, is a comprehensive cable tester for network professionals. It accurately tests a variety of voice, data, video, and USB cables. The TC-NT3 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (1,000 ft.). Quick Test mode issues a pass/fail for large test batches. All components fit into a convenient travel case. Cables and Ports - Accurately check pin configurations for: T568A/B, CAT3-8, USOC (2, 4,6, and 8) straight through and reverse, COAX and Alarm with includes RJ45 to F adapters, USB 3.0, and USB 2.0 cables PIN Tests - Identifies proper, severed, short circuit, and cross connected pins TX/RX Troubleshooting - Displays separate TX and RX results for more efficient troubleshooting Local and Remote Testing- A master unit facilitates loop testing and a detachable remote terminal unit allows for cable testing in locations away from the master unit Continuous Scan - Continuous scan mode is design to accommodate testing with cable ends in different locations Manual Scan - Manual scan is well suited for loop back cable testing Quick Test Mode - Designed to quickly test large cable quantities, Quick Test Mode identifies a given cable type and then immediately issues a Pass/Fail for the same cable type Blinking Hub/Switch Mode - Designed to confirm which port on a hub/switch a given cable is networked to, Blinking Hub/Switch Mode causes the connected network port's LED indicator to blink Cable Distance - Tests cables lengths of up to 300 meters (1,000 ft.) Tone Generator - Compatible with TREND net's TC-TP1, Network Probe, to trace cables using two selectable tones