|
|
-
5.0 of 5.0 with 10 Reviews
SALE PRICE: $139.00 1% OFF
Manufacturer: RF Explorer
Brand: RF Explorer
Model: WSUB1G
Manufacturer: RF Explorer
Brand: RF Explorer
Model: WSUB1G
RF Explorer WSUB1G is a very affordable tool for work in all ISM popular frequency bands. It is based on a highly integrated frequency synthesizer that provides high performance, compact size, low consumption and cost efficient It has been designed to be used equally well outdoor and indoor, and can be connected to a PC for extra functionality using standard mini-USB 2.0 connector. This model comes with a nice Nagoya NA-773 wideband telescopic antenna. It comes with a solid aluminim lightweight case, different modes such as a spectrum Analyzer mode with Peak Max and Hold, Normal, Overwrite and Averaging modes and wide band coverage to all popular sub-1Ghz ISM bands, including 315MHz, 433MHz, 868MHzand 915MHz, also including UHF TV, 70cm and 33cm HAM radio, GSM, etc. Any frequency from 240MHz to 960 MHz is covered. Free software for PCs is also included. Weight: 185g Size: 113x70x25 mm
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $140.00
Manufacturer: Gabotronics
Brand: GABOTRONICS
Manufacturer: Gabotronics
Brand: GABOTRONICS
The Xminilab is a handheld mixed signal oscilloscope with an arbitrary waveform generator and a protocol sniffer. The device has very fast refresh rates with its 2.42" Green OLED display, it has a resolution of 128x64 pixels. The enclosure measures 3.17" x 2.22" x 0.7", the Li-Ion battery has a capacity of 750mAh. Under typical situations, a single charge of the battery lasts over 10 hours. The analog input range is -14V to +20V, the device can withstand higher voltages without damage. The device also features a Curve Tracer option that allows to measure the VI curve of components. Package includes: Xminilab Portable, Carrying case, Micro USB Cable, 4 analog probes, 1 digital probe. 1 3.5mm to BNC adapter.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $145.47
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10083
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10083
Features:Ground resistance measurements from 0.01ohm to 2000ohm with 0.01ohm resolutionData hold, low battery warningComplete with test leads, auxiliary earth bars, heavy duty casePackage includes:1 * DY4100 Ground Resistance Tester1 * Accessory Kit (including Earth Bars and Wires, Test Wire for Earth Resistance)1 * Carry Case
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $145.47
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10083
Manufacturer: Duoyi
Brand: Yi Duo
Model: X1IN10083
Features:Ground resistance measurements from 0.01ohm to 2000ohm with 0.01ohm resolutionData hold, low battery warningComplete with test leads, auxiliary earth bars, heavy duty casePackage includes:1 * DY4100 Ground Resistance Tester1 * Accessory Kit (including Earth Bars and Wires, Test Wire for Earth Resistance)1 * Carry Case
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $145.60
Manufacturer: Morningstar Farms
Brand: Morningstar Corporation
Model: SunSaver
Manufacturer: Morningstar Farms
Brand: Morningstar Corporation
Model: SunSaver
|
Morningstars Sun Saver Duo is an advanced PWM two battery controller for RVs caravans boats and cottages. Rated for 25 amps at 12 volts DC this product will charge two separate and isolated batteries at the same time such as a house and an engine battery based on user selectable priorities. This controller also includes a backlit remote meter which may be mounted in or on a wall and displays digital and pictorial status information about the solar power system. The Sun Saver Duo employs Morningstars legendary Sun Saver controller technology whose long-term track record for high reliability and improved battery charging is well recognized in the solar industry. The Sun Saver Duo is epoxy encapsulated for environmental protection is user adjustable via DIP switch or connection to a personal computer and has an optional remote temperature sensor.Features. Sun Saver-Duo 25 amp 12 volts with Meter Kit.. Two Battery Charging.. Provides More System Information.. Lower Cost.. Easy to Install.. Longer Battery Life.. Extensive Electronic Protections.. Highly Reliable.. Dimension - 17 x 5.6 x 4.1 in.. Item weight - 1lbs.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $146.07
Manufacturer: General Technologies Corp
Brand: General Technologies Corp
Model: CM1000
Color: Grey with Yellow Clamp
Manufacturer: General Technologies Corp
Brand: General Technologies Corp
Model: CM1000
Color: Grey with Yellow Clamp
GTC 1000 Amps AC/DC current clamp meter is equipped with auto-range and high current measurement capability and allows the measurement of AC/DC currents with a resolution down to 0.1 A, and up to a maximum of 1000A, making it ideal for testing all kinds of loads such as found in electric motors, fuel pumps, charging systems, starter currents, alternators, etc. This features a small and narrow jaw, which can accept cables up to 1 inch (25.4mm) in diameter and be used in confined spaces, wire bundles, and small gauge wires. Other features includes resistance measurement functions, continuity test (with buzzer), and display hold and peak detector functions.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $149.00 1% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 2118.8
Manufacturer: AEMC
Brand: AEMC
Model: 2118.8
|
Ohmmeters measure resistance to the flow of current in an electrical component or circuit and check the continuity of an electrical circuit to detect electrical problems such as degraded insulation and improper circuit connections in equipment, wiring, and power supplies. Resistance is an indicator of the overall condition of the device being tested. Microohm meters and milliohm meters measure small resistance values, and megohm meters (also known as megaohm meters, or insulation resistance meters) measure large resistance values. Ohmmeters have an internal power supply, such as a battery or a capacitor, which supplies current to a circuit or component that is turned off. Test leads are connected in a series to the meter and the circuit or device being tested. As current flows through the circuit or device, the meter calculates the difference in voltage between the leads and measures the resistance. Ohmmeters have either two or four input terminals for test lead attachment. The two-terminal, or two-wire, measurement method provides measurements that include the resistance of the circuit or device being tested and the resistance of the test leads. Megohm meters generally use the two-wire method because it provides sufficient accuracy for measuring large values of resistance in insulation testing applications. The four-wire method eliminates resistance from the test leads and measures only the resistance of the circuit or device being tested. Milliohm and microohm meters generally use the four-wire method because it provides a greater degree of accuracy for measuring smaller values of resistance in low-resistance applications.AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA.
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $149.44 1% OFF
Manufacturer: Tektronix
Brand: Tektronix
Model: AC2100
Manufacturer: Tektronix
Brand: Tektronix
Model: AC2100
The Tektronix AC2100 is a rugged transit case molded of high strength glass-epoxy protect your instruments from hostile environments, shock, vibration, moisture and impact. Recommended for shipping or transporting your instruments. Adjustments can be made to the internal padding to accommodate a wide variety of portable instruments and accessories.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $149.99 25% OFF
Manufacturer: SOEKS
Brand: SOEKS
Model: soeks-impulse
Color: Black
Manufacturer: SOEKS
Brand: SOEKS
Model: soeks-impulse
Color: Black
|
Soeks has been awarded for the exceptional performance and precision of their devices. Extremely easy to operate, the soeks impulse professional EMF meter can be used by novices and professionals alike to EMF detection. Whether you are a certified home Inspector or a curious consumer, the impulse is the perfect tool for electromagnetic field detection and measurement. The impulses 5-sensor combination allows you to actually pinpoint the sources of electromagnetic radiation. It has 3 magnetic sensors and 2 electric field sensors for ultimate accuracy and precision. Producing an impressive 2 samples per second, the soeks impulse provides you with 10 hours of continuous use, it features numerous pre-installed thresholds for EMF levels, and comes equipped with both visual and audio alarms for excessive levels. The soeks impulses electromagnetic field frequency measurement range is: 20Hz ð 2,000Hz and its measurement method is inductive. Some of the soeks impulses functions and features: 3 magnetic sensors for magnetic fields and 2 electric field sensors for a total of 5 sensors. Pre-installed thresholds for EMF levels. Produces 2 samples per second. Visual and audio alerts for excessive levels. Up to 10 hours of continuous use. Measurement method: inductive. Emf frequency measurement range: 20Hz ð 2,000Hz. Magnetic field (magnetic induction) intensity measurement range: amplitude along x, Y, and Z Axis (0.04 ð 12 a/m or 0.05 ð 15UT) soeks USA offers 2 year warranty and us based customer and technical support.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $149.99
Manufacturer: LATNEX
Brand: LATNEX
Manufacturer: LATNEX
Brand: LATNEX
|
Product Description: The HF-B3G is designed for measuring and monitoring Radio Frequency (RF) electromagnetic field strength, and is capable of measuring the frequency range of 50MHz~3.5GHz. -RF range: 38mV to 20V/M -Frequency range: 50MHz to 3.5GHz. -Sensors:Triple Axis (X,Y,Z) -Manual data memory (Max & AVG) records -Calibration factor,Alarm and Clock settings Applications:-RF power measurement for transmitters. -High frequency(RF)electromagnetic wave field strength measurement. -Mobile phone base station antenna radiation power density measurement -Spy camera,wireless bug finder -Wireless communication (CW,TDMA,GSM,DECT) applications -Wireless LAN (Wi-Fi) detection,installation -Cellular /Cordless phone radiation safety level -Microwave oven leakage detection -Personal living environment EMF safety Specifications: *Display type: Liquid-crystal (LCD),4-1/2 digits maximum reading 19999 *Measurement method:Digital,triaxial measurement *Directional characteristic: Isotropic, triaxial *Measurement range selection:one continuous range *Display resolution:0. 1mV/m, 0.1µA/m, 0.001µW/m2, 0.001µW/cm2 *Setting time: typically 1.5s (0 to 90% measurement value.) *Sample rate:1.5 times per second *Audible alarm: Buzzer *Units: mV/m,V/m,µA/m,mA/m,µW/m2, mW/m2,µW/cm2 *Display value: Instantaneous measured value, maximum value,average value, or maximum average value *Alarm function:adjustable threshold with ON / OFF *Calibration factor CAL:adjustable *Manual data memory and read storage:200 data sets *Battery life:Approximate 15 hours*Batteries: 9V NEDA 1604, IEC 6F22 or JIS 006P*Battery included: 9V battery x 1
|
|