Electrical Testing - Page 518

Manufacturer: Fluke Brand: Fluke

The next generation VoltAlert AC voltage testers from Fluke are easy to use, just touch the tip to a terminal strip, outlet or cord. When the tip glows red and the unit beeps, you know theres voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home.

Manufacturer: Probe Master Brand: Probe Master Model: 6164

Oscilloscope probe with dual leads, 0.25in sockets accept most male pin hooks and SMD grabbers

Manufacturer: Made in usa Brand: awasy2415

NEW OLD STOCK  IN DIRTY BAG(ZF3-1-1)Exported By ExportYourStore

Manufacturer: Made in usa Brand: Pepperl + Fuchs

NEW OLD STOCK!!3MONTHS WARRANTY!! FULL REFUND!!! (BL8-8-5) FREE! Sellers: Add a FREE map to your listings. FREE!Exported By ExportYourStore

Manufacturer: hu Brand: hayear

Notice:This meter has one very thin screen protective film. Sometimes it has scratches in it. But please do not think it is used or second hand meter. It is brand new. If there is scratch, please remove the protective film, then you will see it is brand new meter. Introduction: S110/S110D Signal Level Meter is an instrument used for the construction and maintenance of analog TV / digital TV, and the measurement of TV signal level and power level. It is widely applied in the routine maintenance of the CATV system. S110/S110D Signal Level Meter is used to analog channels measurement, with strong comprehensive performances; it employs high brightness backlight operating modes, with clear LCD screens, dual-channel measurement display, so it is convenient and pragmatic; besides, numeric keypad input allows it easy to operate; S110/S110D is a compact, small light-weight portable signal level measuring Specifications: Frequency / channel Frequency scope:5~870MHz Channel: U.S. Standard Channel USA STD-CATV U.S. digital standard channels USA STD-CATV Frequency accuracy:+- 50 * 10E-6 (20 ℃+-5 ℃) Level measurement Measuring range:30dBuV ~ 120 dBuV Measurement accuracy: +-2dB (20 ℃ +-5℃) Resolution: 0.5dB Carrier-to-noise ratio measurement Measuring range:20dB ~ 50 dB Signal input range: >=85dBuV Measurement accuracy: +-3dB (20℃ +-5℃) Channel scan: 150 Voltage measurement Input range:1 ~ 100V (AC / DC) Measurement accuracy:+-2V Resolution:1V Power supply: battery:7.2V/1500mAH rechargeable battery AC Supply:AC 90V-220V 50Hz-60Hz Working time:6h Charging time:3h

Manufacturer: Amprobe Brand: Amprobe Model: ACD-14 PLUS

Perfect Choice for Professional Electricians and HVAC Technicians The ACD-14 PLUS Digital Clamp Meter is the perfect choice for both HVAC and electrical applications due to its versatile set of features. Electricians will find it’s thin, light and versatile with thinner jaws than standard clamp meters (only 0.4”/10mm thick). Its ability to measure temperature, capacitance, and microamps are important features for HVAC technicians. The ACD-14 PLUS meter offers thinner jaws over standard clamp meters, allowing access to tight measurement areas and still accommodating conductors up to 25 mm. ACD-14 PLUS Thin, versatile, and light Feature-Rich Digital Clamp Meter The maximum reading mode displays the highest reading in a session to track a sudden increase in measurements. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit’s diodes work properly. The hold function keeps the reading on the display, even after the meter is disconnected. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings, allowing for quick comparison of multiple readings. The unit automatically turns off after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock. Quality and Accuracy You Can Trust It is an auto-ranging multimeter and automatically selects the correct operating range for the property being measured. The meter has a 4,000-count resolution, meaning that it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to ...

Manufacturer: Made in usa Brand: awasy2415

NEW OLD W/O BOX(ZP3-4-3)Exported By ExportYourStore

Manufacturer: Made in usa Brand: awasy2415

NEW IN BOX(YC1-4-1)Exported By ExportYourStore

Manufacturer: 3015232

Commins voltmeter 3015232 Voltage meter Suitable for Cummins generator sets, Cummins meter box Part Number / Model: 3015232 Working voltage: 24V DC Parameters: 600kpa

Manufacturer: Zhuhai Jida Huapu Instrument Co.,Ltd Brand: HoldPeak

The HOLDPEAK 305D variable DC power supply is a compact and affordable instrument that is suitable for both Lab and industrial use. This digital DC power supply has maximum output voltage of up to 30V and current up to 5A. It comes with rotary switches for setting up the voltage and current. With its reliability and versatility, it's an invaluable and indispensable tool for testing, science project and etc., ideal for labs, research institutes, R & D facilities. Specifications: Output DC Voltage: 0 - 30V Output DC Current: 0 - 5A Input Voltage: 220V/AC, 60Hz Voltage and Current adjustment Voltage regulation: CV < 0.01% + 2mV, CC < 0.2% + 3 mA Load regulation: CV < 0.01% + 5mV, CC < 0.02% + 3mA Ripple and noises: CV < 1 mV rms, CC < 3 mA, rms Protection: High current limiting and cooling fan. Operating Temperature: 0 - 102 F (0 - 40 C), Relative Humidity: < 90% LED Accuracy is within +/- 2.5% Size: 10 x 5 x 7 ¾ inches Weight: approx. 12 lbs What's in the box: 305D power supply Power cord Test leads with alligator clips User manual HOLDPEAK is a registered trademark in the United States, any unauthorized use of our trademark is a violation of both Federal and State trademark laws and could subject to liability for damages and penalties. Your feedback is not only important to us but also beneficial to other customers, therefore we'd like to invite you to submit a review for the HOLDPEAK power supply!