|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $151.05 1% OFF
Manufacturer: AEMC
Brand: AEMC
Model: MN255
Manufacturer: AEMC
Brand: AEMC
Model: MN255
|
The Model MN255 is the latest in compact AC current probes. It is designed to meet the most stringent demands in industry and electrical contracting. Model MN255 meets EN 61010, 600V, Cat III safety standards and is CE Marked and UL approved for Canada and United States. The Model MN255 has a 0.78" jaw opening and accommodate conductors up to 250MCM. The unique hooked jaw design facilitates clamping and hooking onto conductors. Polycarbonate materials and ultrasonic welding are used throughout to ensure ruggedness and overall lasting reliability. The Model MN255 uses tape wound cores to further improve its high and low end performance. Rated at 200A RMS it has a measurement range to 240A RMS. Measurement range of 0.5 to 240AAC. Designed for DMMs, loggers, recorders and oscilloscopes. 40Hz to 10kHz response. 100mVAC/AAC output signal. Transformation Ratio: Voltage output. Overload: 240A for 10 min ON, 30 min OFF. Limit Operating Conditions: 200A permanently to 1kHz; Derating above 3kHz: 200A x (1/0.333F), F in kHz. Crest Factor: 3 at 200A RMS with an error (due to CF) of 4 percent. Working/Common Mode Voltage: 600Vrms. Output Termination: 5 feet Lead. Operating Temperature: 14 to 131 degree F. Storage Temperature: -40 to 158 degree F. Operating Relative Humidity: 10 to 35 degree C 85 percent RH (without roll-off above 35 degree C). Measures 5-15/32" length by 2" width by 1-11/64" height. Polycarbonate Material: Polycarbonate with fiberglass charge, UL94 V0.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $154.99
Manufacturer: Trifield
Brand: EMRSS
Model: 100XE
Manufacturer: Trifield
Brand: EMRSS
Model: 100XE
|
The Trifield Meter is a gaussmeter, electric field meter and radio field strength meter in a single unit. When measuring electromagnetic fields (EMFs), the primary concern is usually magnetic fields, which can be tricky to measure. If a less sophisticated 1-axis gaussmeter is used, a reading of zero could result even where the field is strong. A 1-axis meter must be oriented correctly to measure the field (which is a vector). The 3-axis Trifield Meter solves that problem by measuring the true strength of the field regardless of which way it is oriented. Therefore, the Trifield Meter can be scanned rapidly across an area without having to stop at each point to search for the orientation that gives a maximum reading. Another section of the meter detects AC electric fields, which can exist independently of AC magnetic field. The third section detects radio/microwave, such as from a leaky microwave oven. Analog (needle-type) display has very fast response time compared to digital. This meter is good for measuring AC (artificial) magnetic fields rapidly, AC electric fields rapidly, such as from overhead power lines or improperly grounded equipment. Can locate wiring in walls (using the 100XE version) and major RF/microwave sources such as leakage from microwave ovens, or the field near cell towers. Operates about 40 hours on replaceable standard 9V battery, has a low battery indicator. Includes custom made aluminium case which fits Trifield 60hz 100xe Meter as well as additional accessories. This carrying case allows to to protect your Trifield device and keep all the parts and components organized.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $155.00 1% OFF
Manufacturer: Roayl
Brand: Royal
Manufacturer: Roayl
Brand: Royal
|
Indications 41 Reports 3rd GENERATION 2015 RELEASE 2 in 1 Software Total 41 Reports BOTH SPANISH AND ENGLISH LANGUAGES Diagnosis and Therapy System Computer acupuncture provides the therapy through the acupoints in projecting parts of body, readjusting the functions of the pathological organs. Automatic Treatment - Auto-selection of Acupoints Scientific research discovers that, the bio-resistance of acupuncture point is lower than ordinary skin. Moreover, when an organ has pathological change, bio resistance of corresponding auricular point even lower than healthy one, using this machine to detect and treat, the biologic current flow to this point area will be enhanced, then come into alarming or strong stimulation. This is the design theory of the machine, also the therapy theory of detect auto-alarming and treat auto-choosing point. This employs the principle that resistance of the pathological acupuncture points along the channels affected is lower than the surrounding skin and the electric current seeks out these points on the skin and sends impulses flowing along these channels. in close apposition to the external ear select these points automatically. The skin is not punctured, and there is no side effects. This provides the therapy through the acupuncture points in projecting parts of body, dredging the channels and points, readjusting the functions of the pathological organs by strengthening the cell biological vitality, increasing the blood circulations, building a strong immune system, keeping the body in a balanced environment. Different from the temporary treatment of western medicine, This apparatus is a permanent solution dedicated to restore balanced functions of human organs.We are a manufacturer of quantum analyzer,we wish to cooperate with the importerã€wholesalerã€retailer of quantum analyzer aboad,we can provide you discounts if you place a large order,welcome to contact us ! you can send the email with me or add my skype (live:497968579)
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $155.80 5% OFF
Manufacturer: AEMC
Brand: AEMC
Model: MN312
Manufacturer: AEMC
Brand: AEMC
Model: MN312
|
The model MN312 is the latest in compact AC current probes. It is designed to meet the most stringent demands in industry and electrical contracting. Model MN312 meets EN 61010, 600V, category III safety standards and is CE Marked and UL approved for Canada and United States. The model MN312 has a 20mm jaw opening and accommodate conductors up to 250MCM. The unique hooked jaw design facilitates clamping and hooking onto conductors. Polycarbonate materials and ultrasonic welding are used throughout to ensure ruggedness and overall lasting reliability. The model MN312 is a high performance model and uses a custom nickel core to improve accuracy and phase shift on the low end of the measurement range. The model MN312 is an excellent probe to be used in power and low level current measurement applications. Measurement range of 0.01 to 240A. Designed for DMMs, loggers, recorders and oscilloscopes. 40Hz to 10kHz response. 1mV/A output signal. Transformation Ratio: 1000:1. Limit Operating Conditions: 200A permanently to 3kHz; Derating above 3kHz: 200A x (1/0.333F), F in kHz. Crest Factor: 5 at 280A Peak with an error (due to CF) of 5 percent. Working/Common Mode Voltage: 600Vrms. Output Termination: jack. Operating Temperature: 14 to 131 degree F. Storage Temperature: -40 to 158 degree F. Operating Relative Humidity: 10 to 35 degree C 85 percent RH (without roll-off above 35 degree C). Measures 5-15/32" length by 2" width by 1-11/64" height. Polycarbonate Material: Polycarbonate with fiberglass charge, UL94 V0.
-
5.0 of 5.0 with 5 Reviews
SALE PRICE: $161.95 20% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: OC4USB
Manufacturer: Fluke Corporation
Brand: Fluke
Model: OC4USB
Safety-designed interface cable to connect the optically-isolated serial interface port of ScopeMeter or power quality analyzer to a standard USB-interface on your PC. Optical isolation allows you to float your instrument at mains voltages or beyond, while being connected to your PC. Supports the Fluke 120 Series, Fluke 190 Series ScopeMeters, as well as the 43 and 43B and 430 Series Power Quality analyzers. Supports Windows Vista/ XP/2000/Me/98 second edition. Baud rate: 57.6 k Baud max. Logic states: SPACE = 0, light with wavelength 800 nm, MARK =1, no light. Handshake method: XON/XOFF, software handshake only. Environmental: meets requirements of MIL-T-28800D type III, Class 3. Operating temperature: -20 degree C to 55 degree C. Storage temperature: -20 degree C to 70 degree C. 1.5m Cable length.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $165.98
Manufacturer: Sper Scientific
Brand: Sper Scientific
Manufacturer: Sper Scientific
Brand: Sper Scientific
Measure the RF strength of Wi-Fi and LAN, cell phone, radio and TV transmission towers, wireless cameras and microphones. Sper Scientific's 3-Axis RF Meter 840047 measures RF (Radio Frequency) electromagnetic field strength in the frequency range of 50MHz to 3.5GHz. The 3-Axis probe provides simple, accurate, non-directional measurement from any angle. Results are displayed in large digits and a bar graph on a backlit LCD that also indicates maximum or average readings, low battery, and overload. You may set audible alarms a CAL (calibration) factor for a specific frequency or save and review up to 200 readings directly on the meter. Auto-ranging, with auto power off. Comes ready to use in a soft carrying case with belt loop, instruction manual and one 9V battery. Dimensions: 7¾" × 2½" × 2½" (197 × 64 × 64 mm) Weight: 10.3 oz (292 g).
-
5.0 of 5.0 with 5 Reviews
SALE PRICE: $166.05 17% OFF
Manufacturer: Fluke
Brand: Fluke
Model: V3000 FC
Manufacturer: Fluke
Brand: Fluke
Model: V3000 FC
AC Voltage Module, Voltage Range: 3mV to 1000VAC, Indication: LCD, Audible Alert: No, Battery Type: AA, Safety Rating: CAT IV 600V,CAT III 1000V, Flashlight: No, On/Off Switch: Yes, Length: 6-1/2", Width: 2-1/2", Depth: 1-13/32", Switch Type: Push Button, Special Features: Wireless Communication, Operating Temp.: -10 Degrees to 50 Degrees C, Includes: Test Leads, Alligator Clips, Batteries, Magnet Strap, Quick Start Guide Only, Manufacturers Warranty Length: 3 yr.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $169.00 16% OFF
Manufacturer: Reed
Brand: REED Instruments
Model: R5040
Manufacturer: Reed
Brand: REED Instruments
Model: R5040
This autoranging True RMS clamp meter is capable of measuring AC/DC current (500, 1000A) and voltage (AC: 500mV, 5, 50, 500, 750V, DC: 500mV, 5, 50, 500, 1000V) , resistance (500Ω, 5, 50, 500kΩ, 5, 50MΩ), frequency, capacitance (500, 5000nF, 50, 500µF, 5mF), duty cycle and temperature (-148 to 1832°F (-100 to 1000°C)). Featuring a 50,000 count backlit LCD display with a 61-segment analog bargraph and double molded plastic housing, the R5040 includes keeps track of min/max readings and includes a non-contact voltage detector built into the clamp tip.
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $171.24 24% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: ACD-16 TRMS-PRO
Manufacturer: Amprobe
Brand: Amprobe
Model: ACD-16 TRMS-PRO
|
The Amprobe ACD-16 Pro TRMS digital clamp meter with dual display and temperature probe is a true RMS (root mean square) sensing, auto-ranging multimeter for measuring current, voltage, resistance, and frequency in electrical testing applications. It has a transformer clamp that measures alternating current (AC) to 1,000 amp. The meter comes with detachable test leads that measure AC voltage and direct current (DC) voltage to 600 volts, resistance to 1,000 ohms, and frequency to 500 kHz. The clamp has two jaws that can close around electrical conductors up to 1.77" (45 mm) in diameter to measure current without touching or interrupting the circuit. The data logging feature captures the highest and lowest readings in every one-minute time interval over a period of time up to 5,400 minutes. The meter comes with a K-type thermocouple probe for measuring temperature. The meter's backlit liquid crystal display (LCD) is visible in low light. The hold function keeps the reading on the display, even after the meter is disconnected. The auto hold feature automatically captures stable readings. The unit automatically turns off after 16 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal waveform. It is an auto-ranging multimeter and automatically selects the correct operating range for the property being measured. The meter has a 4,000-count resolution, meaning that it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $172.67 7% OFF
Manufacturer: AEMC
Brand: AEMC
Model: MN93-BK
Manufacturer: AEMC
Brand: AEMC
Model: MN93-BK
Model MN93-BK is a AC current probe with 10 Feet leads. Model MN93-BK is of 200A capacity. For use with models 3945/3945-B, 8220, 8230, 8335, L104 and L564.
|
|