|
|
-
4.1 of 5.0 with 42 Reviews
SALE PRICE: $236.61 1% OFF
Manufacturer: Yokogawa
Brand: Yokogawa
Manufacturer: Yokogawa
Brand: Yokogawa
External Standard Resistor for 276910, 275200
-
4.1 of 5.0 with 29 Reviews
SALE PRICE: $236.99 1% OFF
Manufacturer: Das
Brand: Ghost Hunting Source
Manufacturer: Das
Brand: Ghost Hunting Source
This is a great kit for Ghost Hunters and Paranormal Investigators and all the batteries are included!
-
4.1 of 5.0 with 47 Reviews
SALE PRICE: $239.99
Manufacturer: LATNEX
Brand: LATNEX
Manufacturer: LATNEX
Brand: LATNEX
|
Product Description This EMF meter set will give you the tools to effectively measure both high frequency (HF) and low frequency (LF) electromagnetic radiation in your home or any other environment. The MG-300 meter is used for measuring EMF fields of extremely low frequency of 30 to 300Hz, while the HF-B3G is designed for measuring and monitoring Radio Frequency (RF) electromagnetic field strength, and is capable of measuring the frequency range of 50MHz to 3.5GHz. Specifications (MG-300) - Display: 3-1/2 digits LCD, maximum reading 1999 - Range: 200/2000 mG,20/200μT - Resolution: 0.1/1 mG or 0.01/0.1 μT - Frequency response: 30Hz to 300Hz - Accuracy: ± (2.5%+6dgt) at 50Hz/60Hz - Over load: LCD display "OL" - Sample rate: 2.5 times per second - Battery: 9V NEDA 1604, IEC 6F22 or JIS 006P - Battery life: Approximate 100 hours - Operating temperature & humidity: 5℃to 40℃,below 80% RH - Storage temperature & humidity: -10℃ to 60℃, below 70% Specifications (HF-B3G) - RF range: 38mV to 20V/M - Frequency range: 50MHz to 3.5GHz - Sensors:Triple Axis (X,Y,Z) - Manual data memory (Max & AVG) records - Calibration factor: Alarm and Clock settings - Display type: Liquid-crystal (LCD), 4-1/2 digits maximum reading 19999 - Measurement method: Digital, triaxial measurement - Directional characteristic: Isotropic, triaxial - Measurement range selection: one continuous range - Display resolution: 0.1mV/m, 0.1µA/m, 0.001µW/m2, 0.001µW/cm2 - Setting time: typically 1.5s (0 to 90% measurement value) - Sample rate:1.5 times per second - Audible alarm: Buzzer - Units: mV/m,V/m,µA/m,mA/m,µW/m2, mW/m2,µW/cm2 - Display value: Instantaneous measured value, maximum value,average value, or maximum average value - Battery life: Approximately 15 hours
-
4.1 of 5.0 with 18 Reviews
SALE PRICE: $241.00 1% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: RS-3PRO-AMZN
Manufacturer: Amprobe
Brand: Amprobe
Model: RS-3PRO-AMZN
The amprobe rs-3 Pro analog clamp meter is an average-sensing, manual-ranging Multimeter for measuring current, Voltage, and resistance in electrical testing and heating, ventilation, and air-conditioning (HVAC) applications and in environments where very hot or very cold temperatures might interfere with the performance of a Digital meter. This analog meter displays measurements with a needle that moves on a calibrated scale. It has a Broader operating temperature range than Digital multimeters and can be used outdoors. It has a clamp that measures alternating current (AC) to 600 amp, and it comes with detachable Test leads that measure AC Voltage to 600 volts (V) and resistance to 1,000 OHMS. The clamp has two jaws that close around an electrical conductor up to 1.64 inch.
-
4.1 of 5.0 with 28 Reviews
SALE PRICE: $244.13 1% OFF
Manufacturer: Jensen Tools
Brand: Jensen
Model: JTS-30
Manufacturer: Jensen Tools
Brand: Jensen
Model: JTS-30
Designed to meet the needs of inside and outside plant operations these test sets offer the features and construction for continuous use in even the most demanding environments. We offer a complete line to meet your budget. Weatherized and drop tested test-set offers LNR, polarity testing, mute, audible ringer and data safe monitor. Test set comes with heavy-duty alligator clips, metal belt clip, and is designed to be comfortably held to the ear with your shoulder, freeing your hands for work. 1-year warranty.
-
4.1 of 5.0 with 26 Reviews
SALE PRICE: $246.00 1% OFF
Manufacturer: GRATTEN
Brand: GRATTEN
Manufacturer: GRATTEN
Brand: GRATTEN
|
NOTE:The link is the Manual about GRATTEN ATF20B. https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-010-302/ATTEN+ATF20B.rar INSTRUCTIONS ATF20B Function generator uses Direct Digital Synthesis (DDS)technology. Its outstanding performance and system features make it a perfect solution for your testing requirement. The simplified and optimized design of the front panel and dual-language (English/Chinese)TFT display interface make your testing much easier for operation and observation. Additionally, the extendable optional functions can also improve your system characteristics. FEATURES * Direct Digital Synthesis (DDS) technology, independent output channels * High Frequency Resolution: full-range resolution is 40 MHz * Store 40 sets of the user parameters and recall * 32 kinds of standard or build-in fixed waveforms * Minimum stable output waveform: 1mV(50) * Multiple modulation functions: FM, FSK, ASK, PSK * Frequency sweep, amplitude sweep and burst functions * Count the frequency, period, amplitude RMS value or peak-to-peak value * Over-voltage, over-current, output short-circuit and reverse voltage protections * High reliability: use VLSI components and surface mount technology * Power Amplifier: optional part, maximum output power up to 7W * Optional configurations: RS232 interface, Frequency Counter, Power Amplifier GENERAL CHARACTERISTICS * Power Supply: AC220V (1±10%) * AC110V (1±10%) (Pay attention to the voltage selection on rear panel) * Frequency:50Hz (1±5%) * Power Consumption: < 45VA * Operating Temperature: 0°C to +40°C * Operating Humidity: 80% R.H * Operation Characteristics: Keypad operation and rotary knob operation * Display: TFT display, 320*240 * Weight: 3.5kg
-
4.1 of 5.0 with 44 Reviews
SALE PRICE: $250.00 1% OFF
Manufacturer: Megger
Brand: Megger
Model: 242041-7
Manufacturer: Megger
Brand: Megger
Model: 242041-7
|
The Megger 242041 series current test lead set includes one red and one black test lead with terminal clips for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. When used with compatible potential leads, the Megger 242041 series current test lead set allows the operator to take four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The leads have a maximum test current input of 10 amp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardizatio...
-
4.1 of 5.0 with 6 Reviews
SALE PRICE: $250.00 2% OFF
Manufacturer: Owon
Brand: OWON
Model: SDS5032E-V
Manufacturer: Owon
Brand: OWON
Model: SDS5032E-V
|
The Owon SDS5032E-V is a 30 MHz, two-channel digital oscilloscope with a maximum real-time sample rate of 125 MS/s per channel (250 MS/s interleaved), a record length of 10 kpts per channel, advanced triggering, four math functions and FFT, 20 automatic measurements, auto-scale function, pass/fail testing, a VGA port, and USB connectivity for electronics applications such as product design and debugging, repair and servicing, and electrical engineering education, among others. The sample rate and record length enable long capture times for processing and displaying detailed waveforms. An external channel can trigger from a third source while acquiring data from channels 1 and 2. Edge, pulse width, slope, and video triggers allow isolation of specific signals, an alternate trigger allows simultaneous observation of two unrelated signals, and a trigger hold-off function stabilizes triggering on complex waveforms. The oscilloscope's math functions—add, subtract, multiply, and divide—plus FFT (fast Fourier transform) and automatic measurements such as period, frequency, and peak-to-peak enable an in-depth analysis of waveforms. An auto-scale function selects the optimal settings for displaying a waveform, and can be disabled for educational exercises. Pass/fail mask testing determines whether a signal falls within the user-programmed settings. Up to 15 waveforms can be stored in the internal memory. Additional specifications include a rise time of 11 ns and various triggering features. The oscilloscope has an 8" color TFT (thin film transistor) LCD with a resolution of 800 x 600 pixels for viewing waveforms.The oscilloscope has a VGA port for connecting to an external monitor to view waveforms, a USB host port for storing data on a flash drive (sold separately), USB device and LAN ports for connecting to a PC, and includes Microsoft Windows compatible software for transmitting data and remote operation. The unit has European Conformity (CE) marking. It comes with two passive voltage probes; CD-ROM PC so...
-
4.1 of 5.0 with 26 Reviews
SALE PRICE: $250.25 1% OFF
Manufacturer: CROWN
Brand: Crown
Manufacturer: CROWN
Brand: Crown
CROWN 129799-002 ASM Calibrated Current Sensor
-
4.1 of 5.0 with 19 Reviews
SALE PRICE: $252.00
Manufacturer: Yokogawa Electric Corporation
Brand: Yokogawa
Model: CL220
Manufacturer: Yokogawa Electric Corporation
Brand: Yokogawa
Model: CL220
|
The Yokogawa CL220 digital clamp meter is an average-sensing, auto-ranging multimeter for measuring current in electrical testing applications. It has a clamp that measures AC and DC current to 300 amp. The clamp has two jaws that can close around an electrical conductor up to 24mm in diameter to measure current without touching or interrupting the circuit. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The meter has a 4,000-count LCD that shows readings numerically. The unit operates on two 1.5V batteries, and turns off automatically after 5 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. Clamp meters are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. It meets International Electrotechnical Commission (IEC) safety standards 61010-1 and 61010-2-032, and it is rated for CAT III installations to 300V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit comes with two batteries, carrying case, and instructions.SpecificationsMaximum AC input300 ampMaximum DC input300 ampInstallation ratingCAT III, 300VStandards metIEC safety standards 61010 and 61010-2-032Power supply(2) 1.5V batteriesWeight100gDimensions147 x 59 x 25mm (H x W x D)H is height, the vertical distance from the lo...
|
|