Electrical Testing - Page 53

Manufacturer: Amprobe Brand: Amprobe Model: T2200

The Amprobe T2200 is a transmitter for the AT-2000-A Series Advanced Wire Tracer. It puts a 32 KHz signal into a non-energized circuit for open tracing.

Manufacturer: Greenlee Brand: Greenlee Model: GT-540 Color: NA

Greenlee GT-540 Specifications:Voltage Measurement: 6.000, 60.00, 600.0, 1000VResistance Measurement: 600.0 Ohms, 6.000, 60.00, 600.0KOmhs; 6.000 MOhmsCapacitance: 100.0, 1000.0 nF; 10.00, 100.0, 2000 mFDisplay: 6000-count LCDMeasurement Category: CAT IV, 1000V, CAT III, 1000VGreenlee GT-540 Includes:(1) 9V batteryTest leadsGreenlee GT-540 Features:Hassle free, automatic measurement of voltage and resistance.Low impedance eliminates stray or "ghost" voltage readings.AC/DC voltage measurements.Autoranging for quick, convenient measurements.Non-contact voltage detection for identifying live lines without contacting conductors.Auto off for longer battery life.Low battery indicator.Resistance measurement.Audible continuity test.Data hold to capture measurements.High impedance AC/DC voltage measurement capability for load-sensitive circuits.Capacitance measurement.Diode Test.Low resistance range with fast continuity test.Enhanced accuracy.Auto and manual range selection.

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 369B

The B&K Precision 369B digital clamp meter is a true RMS sensing, manual- and auto-ranging multimeter for measuring current, voltage, frequency, resistance, and capacitance in electrical testing applications. It has a clamp that measures AC and DC current to 1,000 amp. The clamp has two jaws that can close around an electrical conductor up to 57mm (2.24") in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 750V, DC voltage to 1,000V, voltage frequency to 400kHz (kilohertz), resistance to 40 megohms, and capacitance to 40 microfarads. Its relative function allows a measurement to be set as a reference value, and it displays the subsequent measurements as positive or negative deviations from that value. The peak hold function records the maximum measurement of a current surge. The maximum/minimum function records the highest and lowest readings in a session to track a sudden increase or decrease in readings. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. An audible continuity sensor confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. The meter has a rotary switch to select the property to measure, and a 4,000-count LCD that shows readings numerically and in a 42-segment bar graph. The unit operates on a single 9V battery, and turns off automatically after 30 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. Clamp meters are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. It has two ranging modes: manual, which allows the user t...

Manufacturer: AEMC Brand: AEMC Model: MN353

The MN353 is a high accuracy and low phase shift AC current probe with voltage output. It is designed for use with DMMs or current measuring instruments with voltage inputs. The voltage output is proportional to the current measured (through the jaws). The MN353 has an integral 5 feet lead terminated by shrouded banana plugs. The MN probe is the latest in compact AC Current probes. Designed to meet the most stringent demands in industry and electrical contracting, they also meet the latest safety and performance standards. Measurement Range: 0.1 to 150A. Transformation Ratio: Voltage output. Output Signal: 10mV/A (1V at 100AAC). Overload: 240A for 10 min ON, 30 min OFF. Frequency Range: 40 to 10kHz. Limit Operating Conditions: 200A permanently to 1kHz; Derating above 3 kHz: 200 A x (1/0.333F), F in kHz. Crest Factor: 3 at 150A RMS with an error (due to CF) of 3 percent. Working Voltage: 600Vrms. Common Mode Voltage: 600Vrms. Influence of Adjacent Conductor:

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS210-R Color: Red

Probe set includes 600V CAT III / 1000V CAT II rated 10:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 10x. Bandwidth: 200 MHz. Maximum input voltage: 1000V CAT II or 600V CAT III. Maximum voltage to ground: 1000V CAT II or 600V CAT III per IEC / EN61010-031. Input resistance: 10 mega ohms. Input capacitance: 12 pF. Compensation range: 10 to 22 pF. Cable length: 1.2m. Color: red. UL Listed.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS210-R Color: Red

Probe set includes 600V CAT III / 1000V CAT II rated 10:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 10x. Bandwidth: 200 MHz. Maximum input voltage: 1000V CAT II or 600V CAT III. Maximum voltage to ground: 1000V CAT II or 600V CAT III per IEC / EN61010-031. Input resistance: 10 mega ohms. Input capacitance: 12 pF. Compensation range: 10 to 22 pF. Cable length: 1.2m. Color: red. UL Listed.

Manufacturer: Psiber Data Systems Brand: Psiber Data Model: LM26

The LANMASTER 26 Link Tester provides LAN Installers and Maintainers a tool with the testing capability for Gigabit (1000baseTX) over copper, Fast Ethernet (100baseTX), Standard Ethernet (10baseT) links as well as VoIP/PoE detection. The LanMaster 26 measures the voltage supplied by the VoIP or PoE port with typical loading to ensure that the voltage level is adequate. The port ID feature identifies which port on a hub or switch that a wall outlet is connected by flashing the Link light on the connected port.

Manufacturer: Fluke Brand: Fluke Model: V3001 FC

Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, or leads connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit; multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meter choice includes the electrical properties to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has multiple settings that correspond to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS212-R Color: Red

Probe set includes 600V CAT III / 1000V CAT II rated 10:1 voltage probe, hook clip for probe tip, ground lead with mini alligator, insulation sleeve, 30V CAT II rated ground spring for probe tip. Attenuation: 10x. Bandwidth: 200 MHz. Maximum input voltage 1000V CAT II or 600V CAT III. Maximum voltage to ground: 1000V CAT II or 600V CAT III per IEC / EN61010-031. Input resistance: 10 mega ohms. Input capacitance: 18 pF. Compensation range: 10 to 30 pF. Cable length: 2.5m. Color: red. UL Listed.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS410-II-V

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.