Electrical Testing - Page 538

Manufacturer: IDI Brand: IDGroup

Contact Probes Receptacle Wire Wrap 0.016

Manufacturer: Kyoritsu Brand: Kyoritsu Model: 3023

The Kyoritsu digital megohmmeter is an auto-ranging insulation tester with four test voltages for measuring insulation resistance to 2,000MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance to 400Ω and AC and DC voltage to 600V, lighting a warning indicator and sounding a buzzer when a live circuit is detected. The comparator function allows a reference resistance value to be set, lights a "pass" or "fail" indicator for subsequent readings, and triggers a buzzer when a reading exceeds the reference value. Up to 99 insulation resistance readings can be stored in the unit's internal memory. When measurement is complete and the range selector is switched off, residual voltage is automatically discharged from the circuit under test. The test button can be locked for extended measurement sessions. The meter has an LCD with a backlight for visibility in low light that automatically turns off after 60 seconds. The display shows readings numerically and in a bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.This auto-ranging meter automatically selects the appropriate operating range for measurements. It is rated for category (CAT) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. It automatically turns off after 15 minutes of non-use to conserve battery life and has a low-battery indicator that signals when the batteries need to be replaced. It comes with a set of test leads with a remote control switch for initiating a test, a test bar, a safety alligator clip, an extension prod, a test lead storage pouch, six AA batteries, and instructions. SpecificationsMaximum insulation resistance measured2,000MΩTest voltagesB009TAL7K...

Manufacturer: Agilent Technologies Brand: Agilent Technologies

Agilent Eclipse Plus C8,4.6x50mm,3.5um - BC

Manufacturer: Fluke Corporation Brand: Fluke Model: BHT190

Set of break-out adapters for the three most common industrial bus connection systems M12, DB-9 and RJ-45. Each board works as a straight-through connection for the bus cable and gives access to the individual wires and pins of the connector system for hooking up probes. Break-out adapter DB-9, male-to-female. Gives access to pins 1 thru 9 and shield. Break-out adapter M12, with cables, male-to-female. Gives access to pins 1 thru 5. Break-out adapter RJ-45, female-to-female with patchcable (patchcable not shown on photo). Gives access to pins 1 thru 8 and shield. Maximum voltage: 30V rms, 42V peak, between any connection and between connections and ground.

Manufacturer: Hantek Brand: Hantek DSO1102B

Bandwidth:100MHz Channel:2 Real-Sample Rate:1GSa/s Equivalent Sample Rate:25GSa/s Record Length:1M Rish time:≤3.5ns Timebase Accuracy:±50ppm Time Base Range:Time Base Range Input Impandance :Input Impandance VOLTS/DIV Range:VOLTS/DIV Range A/D Converter:8bit Position Range:±50V(5V/div), ±40V(2V/div～500mV/div), ±2V(200mV/div～50mV/div), ±400mV(20mV/div～2mV/div) DC Gain Accuracy:±3% for Normal or Average acquisition mode, 5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div. Bandwidth Limit:20MHz Trigger Types:Edge, Video, Pulse, Slope, Over time, Alternative Trigger Source:CH1, CH2 Math:+, -, x, ÷, FFT, Invert Cursor Measurement:Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT); Auto Measuerment:Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF DMM Max. Resolution:6,000 Counts Testing Modes:Voltage, Current, Resistance, Capacitance, Diode & Continuity Max. Input Voltage:AC: 600V, DC: 800V Max. Input Current:AC:10A , DC: 10A Max. Input Impandance:10MΩ Display:5.6"TFT 16K Color Display, 640*480 dots Size:245mm x 163mm x 52mm Weight:1.3KG(Without Package) Standard Probe:PP150x2

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT3687

DSO active differential probe with 100x and 1000x attenuation ranges and voltage measurements up to +/-1400 V. Bandwidth to 100 MHz. Powered by 4 AA batteries or optional 6V DC mains adapter. Applications include: precise power semiconductor device measurements, switching power supply design, precise measurement of power converters, precise measurement of motor derived. Features: Up to +/-1400 V differential. 100 MHz bandwidth (-3 dB). High accuracy +/-2 percent. Safety certified. High CMRR. Accessories: spring loaded hook probes, 4 AA batteries, manual. Reference SI-9110. Bandwidth: 100 MHz. Attenuation(s): 100x/1000x. Accuracy: +/-2 percent. Rise time: 3.5 ns. Input impedance: 4 Mohm/7 pF. Input voltage: Differential voltage (DC+Peak AC): +/-140V / +/-1400 V. Common-mode voltage (DC+Peak AC): +/-1400V or 1000 Vrms. Absolute max. voltage (DC+Peak AC): +/-1400V or 1000 Vrms CAT III. Output voltage: Swing: +/-7V (into 50 kohm load). Offset (Type): +/-5 mV. Noise (Type): 0.9 mVrms. Source impedance (Type): 50 kohm. CMRR (Type): -80 dB at 60 Hz; -50 dB at 1 MHz. Operating temperature/humidity: -10 to +40 degree C / 25 to 85 percent RH. Storage temperature/humidity: -30 to +70 degree C / 25 to 85 percent RH. 95cm Cable length. 30cm Input leads length. 2002/95/EC RoHS compliant. Measures: 202mm length by 83mm width by 38mm height.

Manufacturer: Rigol Brand: Rigol Model: MC3324

Rigol MC3324 MIX Module 20-voltage-channel+4-current-channel Mixed Multiplexer . 24 channel multiplexer module for use with M300 DAQ System Mainframe and MC3065 DMM module. This card has 20 voltage channels configurable for 2 or 4 wire measurements and 4 current only measurement channels. The M3TB24 is the mating terminal block for this module. MC3324 (24-Channel Multiplexer)??Ü The MC3324 is a mixed multiplexer with 20 voltage channels and 4 current channels. All 20 voltage channels switch both HI and LO inputs, thus providing fully isolated inputs to the DMM module, and is divided into two banks (called A and B) of 10 two-wire channels each. When making 4-wire resistance measurement, the instrument automatically pairs channels of A bank and B bank. All channels are break-before-make. You can close multiple channels on this module only if you have not configured any channel to be part of the scan list. 4 current channels are used in combination with the DMM module to measure DC current or AC current. All channels are break-before-make. In any case, you cannot close multiple channels on this module. This module can be connected with MC3065 (DMM Module, if MC3065 is currently inserted). Measurement Connections Using External Terminal Blocks  M300 provides 6 kinds of terminal blocks to easily connect the signal to be measured to the module. The models of the terminal blocks and corresponding modules are listed in the table below. This section introduces how to use the external block.   Terminal Block Module 1 M3TB32 MC3132, MC3232 2 M3TB64 MC3164, MC3264 3 M3TB24 MC3324 4 M3TB48 MC3648 5 M3TB16 MC3416 6 M3TB34 MC3534 Note: for the MC3724, the signal can be connected to the SMB connectors on the module directly. No terminal block is needed

Manufacturer: MOISTURE REGISTER Brand: MOISTURE REGISTER

1 New Moisture Register Pm8F Moisture Meter W/ Case (X12)

Manufacturer: Fotronic Corporation Brand: Pro-Tek Model: GD0010N

Manufacturer: Hantek Brand: Hantek DSO5062BMV

Features: •60MHz bandwidth •1GSa/s Real time sample rate •Trigger mode:edge/pulse width/line selectable video/slop/overtime etc •USB host and device connectivity, standard •Multiple automatic measurements •Provides software for PC real-time analysis •With video help function,built-in 2GB flash memory card Specifications: •Model:DSO5062BMV •Bandwidth:60MHz •Channel:2 •Real-Time Sample Rate:1GSa/s •Equivalent Sample Rate:25GSa/s •Memory Depth:2M •Rise Time:1.7ns/3.5ns/5.8ns •Time Base Accuracy:±50ppm •Time Base Range:2ns/div-40s/div •Video Help:Yes •SD Card:Yes •Input Impendance:1MΩ •VOLTS/DIV Range:2mV/div～5V/div •A/D Converter:8 bit •Position Range:±50V(5V/div),±40V(2V/div～500mV/div), ±2V(200mV/div～50mV/div),±400mV(20mV/div～2mV/div) •DC Gain Accuracy: ±3% for Normal or Average acquisition mode,5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div •Bandwidth Limit:20MHz •Trigger Types:Edge,Video,Pulse, Slope,Over time,Alternative •Trigger Source:CH1,CH2,EXT,EXT/5, AC Line •Math:+,-,x,÷,FFT •Cursor Measurement: Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT) •Auto Measuerment:Frequency,Period, Mean,Pk-Pk,Cycli RMS,Minimum, Maximum,Rise time,Fall Time,+Pulse Width,-Pulse Width, Delay1-2Rise, Delay1-2Fall,+Duty,-Duty,Vbase,Vtop, Vmid,Vamp,Overshoot, Preshoot,Preiod Mean,Preiod RMS,FOVShoot, RPREShoot, BWIDTH,FRF •Display:7"TFT 16K Color LCD,800*480 dots