|
|
-
4.1 of 5.0 with 25 Reviews
SALE PRICE: $1,099.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3024677
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3024677
Fluke 32A planar shunt.
-
4.1 of 5.0 with 9 Reviews
SALE PRICE: $1,163.80 1% OFF
Manufacturer: Megger
Brand: Megger
Model: 242104-2-16
Manufacturer: Megger
Brand: Megger
Model: 242104-2-16
|
The Megger 242104-2 series duplex test lead with C-clamp is for use with Megger 247100, 247101, DLRO200, and DLRO600 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements. The lead has a maximum test current input of 100 amp. The C-clamp provides a hands-free connection to a conductor and can accommodate conductors up to 4" (10 cm). The C-clamp directs the current through the clamp and screw and the potential through a four-point anvil that is insulated from the clamp.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardiza...
-
4.1 of 5.0 with 22 Reviews
SALE PRICE: $1,165.00 1% OFF
Manufacturer: COLE-PARMER
Brand: Megger
Manufacturer: COLE-PARMER
Brand: Megger
|
These insulation resistance testers are the recognized standard in the industry. They have proven so reliable and popular that they have been reintroduced, generation after generation, with circuitry upgraded to complement the familiar design. True analog movement remains a popular feature, especially where diagnosis is involved. The trained eye can get much more than just a MÙ reading from an analog meter. Similarly, a guard terminal adds a valuable extra dimension when more than just pass/fail testing is desired. With commonly four test voltages, extra range to the resistance measurements, continuity and kÙ functions for proofing and troubleshooting, they address the widest range of applications and are the most general models. FEATURES BD422101The most basic hand-cranked tester. Dating back to its initial version, this has the longest history and is the most popular model ever on the market. The dependability of this self-contained generator remains unchallenged BD422103 A dual source version, combining line operation and hand-crank, ease and dependability BD422104 Operates on convenient throwaway batteries BD422105 Battery rechargeable by internal charger and powered by 120 volt ac, 50/60 Hz line BD422106 A lower-voltage, lower-range version of the BD422101. With a 50 V output selection, it is the model of choice for testing sensitive equipment, subassemblies, and components BD422107 High Resistance Model - Offering a greater range (by a power of 10). This is the instrument of choice where accurate readings of exceptionally high resistance values are preferred over pass/fail infinity readings. This capability makes this unit especially suited for long-term trending of new equipment where readings will commence from factory-fresh values BD422109 Digital Autoranging Model - For those who prefer digital, this model includes all of the Megger series standard capabilities Model 210170 - High Resistance Model - Offers a greater range (by a power o
-
4.1 of 5.0 with 14 Reviews
SALE PRICE: $1,423.33 7% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 1050
Manufacturer: AEMC
Brand: AEMC
Model: 1050
|
The AEMC 1050 digital megohmmeter is an auto-ranging insulation tester with a voltage safety check and five test voltages—50, 100, 250, 500, and 1,000V—for measuring insulation resistance to 4,000GΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance to 400kΩ, capacitance to 5μF, and AC and DC voltage to 1,000V, disabling insulation testing when a voltage greater than 25V is detected. The R-DAR-PI (resistance-dielectric absorption rate-polarization index) function calculates and displays the DAR and the PI, which are measurements over time that give a truer indication of insulation condition than single-point measurements. The timer function allows timed testing from 1 to 59 minutes. High and low thresholds for insulation and resistance measurements can be set, triggering an alarm when readings fall outside the settings, and will be retained even after the meter is powered off. When measurement is complete, the meter enters voltage detection mode and automatically discharges residual voltage from the circuit under test. A memory function allows storage and recall of 20 readings. The meter can perform a continuity check up to 40Ω and buzzes to confirm that a circuit conducts electricity. Built into a double-insulated, dual-walled field case, the meter has a 4,000-count LCD with a backlight for visibility in low light. The display shows readings numerically and on a 31-segment bar graph. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.This auto-ranging meter automatically selects the appropriate operating range for measurements. It is rated for category (CAT) III installations up to 600V, which covers energy-consuming equipment connected to a fixed installation, including household, office, and laboratory appliances. The unit automatically turns off after five min...
-
4.1 of 5.0 with 31 Reviews
SALE PRICE: $1,450.00 1% OFF
Manufacturer: Hioki
Brand: Hioki
Manufacturer: Hioki
Brand: Hioki
|
Hioki ST5520-01 Insulation Testers The Hioki electrical safety test instrument series is designed for insulation resistance and voltage withstand testing of electrical devices and components according to various safety standards. The ST5520 and ST5520-01 are the fastest insulation testers in the industry, delivering pass/fail assessment in as fast as 50 ms. 25 to 1000 V test voltage with 1 V resolution. Industry-beating test time Rapidly assess in as fast as 50 ms Testing is complete in as little as 50 ms - the fastest time in the industry. This is 700 ms faster than legacy Hioki models. Discharge time varies according to the sample's capacitance The pictured waveform re?¼éects use of a test time of  45 ms The waveform shows the test result for a 9 MΩ, 10 pF sample  High-speed auto discharge function Quickly discharge residual voltage The post-test residual voltage discharge time has been reduced significantly compared with legacy models. As a result, when comparing an identical sample under the following conditions, a takt time improvement of 990 ms is estimated. Discharge time varies according to the sample's capacitance The waveform shows the test result for a 9 MΩ, 10 pF sample Contact check function Prevents errors due to poor contact The contact check function allows you to check that proper contact has been made with the device under test prior to the testing. This ensures that resistance testing is not carried out without proper contact, as this can result in erroneous assessment. There are two methods: 4-wire contact check and comparator contact check. 4 - Wire Contact Check Continuity between the low contact check terminal and the low output terminal, and between the high contact check terminal and the high output terminal, is veri?¼üed
-
4.1 of 5.0 with 1 Reviews
SALE PRICE: $1,599.88 17% OFF
Manufacturer: Applent
Brand: Applent
Manufacturer: Applent
Brand: Applent
|
Features:High brightness, ultra clear four-color VFD Display.Auto Zero-Adjust for each rangeComparator Function: Stores up to 30 sets of measurement conditions HI/IN/LOW/GD/NG VFD Show or HANDLER out.Four-terminal resistance measurement.Build-in RS-232C, Handler(EXT-I/O) InterfaceBeeper and brightness can be adjusted.Internal,Manual,External and Remote Trigger.USB Interface(Optional).SCPI compatible command sets.Application:Pure resistancethe resistance of motor and transformerwindingsEnamel-insulated wire resistance.relay/switch connector contactsPCB patternsSpecifications:Parameter:DC resistanceAccuracy: 0.01%Measurement RangeMeasurement Range: 0.1μΩ ~ 110MΩSignal Source:Current range: 1μA~1ARange:Automatic and manual with 11 rangesSpeed:150 times/second, 10 times/second, 2 times/secondResult Display:Show, ΔABS,Δ% and sorting resultMax reading: 200000Correction:Open & short resetComparator:30 groups record, NG-LO, GD-IN, NG-HI display and output, adjustable beep and volumTrigger: In, manual, external and remoteConfiguration Interface:RS232C, Handler interface (PLC interface)Test terminal:4 terminal shielding ( 2 check terminal and 2 driving terminal) and external shielding ground sectionPower Supply:Voltage: 198V AC - 240V AC;Frequency: 50Hz ;Power: Max 15VA 110V,60Hz is also avaliableAccessories:ATL501:Kelvin clip ATL801:232 communication cable
-
4.1 of 5.0 with 44 Reviews
SALE PRICE: $2,155.00 1% OFF
Manufacturer: Rohde & Schwarz
Brand: Rohde & Schwarz
Model: 5800.2177.02
Manufacturer: Rohde & Schwarz
Brand: Rohde & Schwarz
Model: 5800.2177.02
The HMP series has set an 'all new standard' in the 200/400W power range. Units have a set- and read-back resolution of up to 1mV/0,1mA. Even fully loaded, the residual ripple voltage stays below 150µVrms. The outputs, earth-free and electrically insulated, can be synchronized using their current- or voltage-tracking functionality. In case of an over-load of one channel, the 'Fuse Link' feature can synchronously shut down all logically linked outputs. To complete the picture, users can easily set up basic voltage- and current curves using the 'EasyARB' function. For easy integration into 19" rack mount systems, all outputs and sense inputs are also available on the rear side of the devices.
-
4.1 of 5.0 with 22 Reviews
SALE PRICE: $2,450.00 1% OFF
Manufacturer: Rigol
Brand: Rigol
Model: DSA815-TG
Manufacturer: Rigol
Brand: Rigol
Model: DSA815-TG
RIGOL DSA815 digital spectrum analyzer is the part of DSA800 series of spectrum analyzers which are small, lightweight and cost-effective. RIGOL DSA815 is equipped with easy-to-operate numeric keypad, high-resolution color LCD display and various remote communication interfaces. RIGOL DSA800 series of spectrum analyzers, and DSA815 model in particular can be widely used in various fields, such as education, company research and development as well as industrial manufacture.
1.5 GHz tracking generator is included in the package.
RIGOL DSA815-TG Spectrum Analyzer Package Contents:
RIGOL DSA815 spectrum analyzer (1 pc.)
1.5 GHz tracking generator (1 pc.)
Power cable (1 pc.)
Quick guide (1 pc.)
CD-ROM (User's Guide, Programming Guide) (1 pc.)
EMI Filter & Quasi-Peak Detector Kit RIGOL DSA800-EMI.
-
4.0 of 5.0 with 90 Reviews
SALE PRICE: $2.06 6% OFF
Manufacturer: Amico
Brand: Amico
Model: a12032000ux0088
Manufacturer: Amico
Brand: Amico
Model: a12032000ux0088
Double alligator clip to double banana plug. Alligator Clips are Fully insulated and easily put in probe tips.Electrical test lead is suitable for use with multimeters, power supplies and other electronic equipments. Easy for installation and safety for use with the insulation plastic boots covered.
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $2.30 5% OFF
Manufacturer: SODIAL(R)
Brand: SODIAL(R)
Model: 006636
Manufacturer: SODIAL(R)
Brand: SODIAL(R)
Model: 006636
* SODIAL is a registered trademark. ONLY Authorized seller of SODIAL can sell under SODIAL listings.Our products will enhance your experience to unparalleled inspiration. * SODIAL(R) 10 Pcs 50mm Plastic Handle Test Probe Metal Alligator Clips * Alligator clips can be used in electrical or laboratory electric testing work. * Alligator clips are frequently used in school physics laboratories to quickly and cheaply assemble circuits. * They are useful for connecting components to wires. * Alligator clips can be used as miniature clamps to hold parts together for gluing and wires together for soldering. * Weight : 41g * Package Content : 10 x Alligator Clips
|
|