Electrical Testing - Page 552

Manufacturer: Honeywell Brand: Honeywell Model: POPUP2020 Color: Multicolored

Popup Replacement Filter for Space-Guard -2200.

Manufacturer: Kuman Brand: Kuman Model: 13804Kus Color: 13804K（SMD not-soldered)

Kuman DSO138 is partially open-sourced. This opens the possibility for users to add different features or develop new applications on the hardware. DSO138 oscilloscope DIY kit Major features : Analog bandwidth: 0 - 200KHz Sampling rate: 1Msps max Sensitivity: 10mV/Div - 5V/Div Sensitivity error: < 5% Vertical resolution: 12-bit Timebase: 10us/Div - 500s/Div Record length: 1024 points Built-in 1KHz/3.3V test signal Waveform frozen (HOLD) function available 9V DC (8 - 12V acceptable) Supply Current: 120mA NOTE: 9V DC power supply required. Not included. Dimension: 117mm X 76mm X 15mm Weight: 70 gram (not including cables) Features DSO138 kits are sold in two configurations. One is with all SMD parts pre-soldered (PN: 13803K, replacing 13801K). The other is with only the main IC (the MCU) pre-soldered (PN: 13804K, replacing 13802K). The latter serves also as a SMD soldering training kit. For both configurations the MCU has been pre-programmed and no re-programming required.

Manufacturer: JYETech Brand: JYETech

Manufacturer: PAI Industry Brand: PAI Industry

Valve Exhaust 391963

Manufacturer: zhangminvy

Introduction This module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears. Sound is broken down into seven frequency bands and the peak level for each band can be read. The seven frequencies measured are as follows: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz and 16kHz. This module can be used to create sound visualizers, detect patterns in music or add sound activation to your microcontroller. Applications • Detect patterns in music - make a robot dance! • Process the values read, then display on LEDs as a soothing visualization which changes with the music. • Pimp the interior lighting in your car so it pumps to the beat and twinkles to the high hats. • Create / listen for fingerprints in certain sounds - voice analysis. Specification • Voltage:5V • Size:30x20mm • Weight: 5 grams Shipping List • Audio Analyzer Module(1 Unit) • Analog Cable(2 units) • Digital Cable(1 unit)

Manufacturer: Peak Electronic Design Ltd Brand: Peak Electronic Design Ltd Model: SMD03M

Red/Black twezzer set designed for use with the LCR and ESR Peak Atlas testers. A pair of very high quality uSMD tweezers designed for the new 2mm LCR plugs. These tweezers are superb quality, with gold plated tips and compatible with industry standard 2mm banana plugs. These fit easily and securely to the 2mm LCR plugs. The gold tips can touch together which means they are suitable for even the smallest parts (smaller than 0402s for example). Additionally, the tips can open wide enough for very large SMD parts (such as Case D tantalums or even larger)

Manufacturer: Yeeco Brand: Yeeco Model: 1400351

DL69-2048 multi-function digital display meter can measure AC voltage and current,and compute the active power ，reactive power and power factor at the same time. Technical Specifications 1. Accuracy: 1% (+ - 2 words) 2. Display: AC voltage and current with 4-digital 0.31-inches LED,active Power, raective power and power factor with 5-digital 0.31-inches LED. 3. Measurement Range: AC Voltage: AC 200.0-450.0V/AC80.0-300.0V(According to your order） AC current: AC0-100.0A,when input current lower than 10A, the resolution ratio is 0.01A,when input current higher than 10A, the resolution ratio is 0.1A. Active Power: AC80-300V,0-30000W/AC200-450V,0-45000W reactive power: AC080-300V,0-30000VA/AC200-450V,0-45000VA Power Factor: 1.000-0.000 4. Measurement Speed: 2 times per second 5. Dimensions: 79 * 43 * 42mm 6.Installation size: 76 * 39mm Note: 1.Voltage connect to the blue terminal and secondary transformer connect to the blue terminal, wrong connection will destroy the meter 2.The only use for 50Hz-Electric supply.Do not support for square wave, Inveter output and other input, all of these will destroy the meter. Application Method 1.Connect the wires of secondary transformer to the blue terminal on the meter,the measure line must across the hole int the current transformer . 2. Connect the measure voltage wire to the green terminal 3.The default display power is active power (V),click the switch (SAM CK)can change to the reactive power(VA) and power factor(cosØ) packing including: 1x Multi-function Digital Display meter

Manufacturer: ECLIPSE ENTERPRISES, INC. Brand: Pro'sKit Model: 900-249

Round hole breadboard has 2420 tie points, it features round hole designed for easy plug & pull and wear proof material made of ABS & phosphor bronze with good flexibility and electric conductivity.

Manufacturer: Jb Weld Company Brand: J-B Weld Model: 8267-S Color: Dark Gray

SteelStik is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. SteelStik sets in 3-5 minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and painted. SteelStik cures to a dark grey color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300 degrees F.

Manufacturer: KKmoon Brand: KKmoon

This meter can test electric field radiation and magnetic field emission to reach the optimal test result. It is used to test and learn electromagnetic radiation situation indoor and outdoor. It is equipped with a built-in electromagnetic radiation sensor, which can display the radiation value on the LCD digital display after processing by control micro-chip.Specifications: Color：Orange + Black Material: Plastic Unit: V/m (Electric Field); μT(Magnetic Field) Accuracy: Electric: 1V/m; Magnetic: 0.01μT Range: Electric: 1-1999V/m; Magnetic: 0.01-19.99μT Alarm Threshold: Electric: 40V/m; Magnetic: 0.4μT Display: 3-1/2 LCD Display Test Bandwidth: 5Hz-3500MHz Sampling Time: Approx. 0.4 Seconds Test Mode: Bimodule Synchronous Test Over Range Indication: LCD Displays "1" Operating Temperature: 0°C-50°C Operating Humidity: Relative Humidity