Electrical Testing - Page 559

Manufacturer: Pomona Electronics Brand: Pomona Model: B-36-5 Color: Green

Hands free testing in controlled voltage environment: 5000 Vdc; For CE compliance: not intended for hand held use at voltages above 33 Vrms/70 Vdc, 15A, +131ËšF (+55ËšC) max

Manufacturer: Multi-Contact (MULWR) Brand: Multi-Contact (MULWR)

Multi-Contact Z4S-050 Test & Measureline Ø 4 mm Safety Test Lead Set with Accessories, Black/Red, 4pcs/pack

Manufacturer: Precision Diagnostic Instruments Brand: PDI Model: DP-110 Color: Blue

The DP-110, In-Duct Digital Psychrometer, is designed to take accurate measurements of humidity and temperature from the most difficult to reach places. The convenient, 6" flex-neck allows technicians to position the sensor in ducts or plenums. Measure wet bulb and dry bulb temperatures directly before and after the evaporator coil to determine Target Evaporator Exit Temperature. Measure the indoor wet bulb and outdoor dry bulb to determine Target Superheat. The DP-110 takes all of the psychrometric measurements needed for any HVAC/R service..

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT2488

Alligator style contact can grasp terminals to 12.7 mm in diameter 6" overall length. Insulation on alligator contact protects against shorting. Alligator clip includes 4 mm banana jack interconnect to digital multimeter. Body Made of polyamide (nylon) and santoprene; brass, nickel plated contact. IEC rating 1,000 V CAT III. Maximum current: 6 A. Maximum resistance: 50 mohms. Temperature: -20 C to +80 degree C. RoHS (2002/95/EC) compliant.

Manufacturer: Pomona Brand: Pomona Model: 3230

Size B Aluminum Box With Cover BNC Female/Female

Manufacturer: OMRON Brand: Omron

[Operation/resetting system] Time-limit operation/self-resetting [Time-limit contact] DPDT (for power switching) [Supply voltage] 24VDC [Mounting] Surface/DIN-track mounting(with socket) Time Ranges [Rated time] 10 min [Time setting range] 0.5 to 10 min Ratings [Item] H3Y-2 [Rated supply voltage *5 *6] 24VDC *1 *2 [Operating voltage range] All rated voltages except 12 VDC: 85% to 110% of rated supply voltage 12 VDC: 90% to 110% of rated supply voltage *3 [Reset voltage] 10% min. of rated supply voltage *4 [Power consumption] Relay ON: Approx. 1.1 W at 24 VDC Relay OFF: Approx. 0.1 W at 24 VDC [Control outputs] H3Y-2: 5 A at 250 VAC, resistive load (cos phi = 1) The minimum applicable load is 1 mA at 5 VDC (P reference value). Contact materials: Ag *1. With DC ratings, single-phase full-wave rectified power sources maybe used. *2. Only the H3Y-2 and H3Y-2-0 Series include 2-VDC models. *3. Use the Timer within 90% to 110% of the rated supply voltage (95% to110% for 12 VDC) when using it continuously under an ambient operating temperature of 50 deg.(C). *4. Set the reset voltage as follows to ensure proper resetting. 100 to 120 VAC:10 VAC max. 200 to 230 VAC:20 VAC max. 100 to 110 VDC:10 VDC max. *5. Refer to Safety Precautions for All Times when combining the Timerwith an AC 2-wire proximity sensor. *6. A diode to prevent reverse voltages is provided only on models witha DC power supply.

Manufacturer: Cal Test Electronics Brand: Cal Test Electronics Model: CT2882-6-10 Color: Blue

PVC jacketed test lead wire is the choice for cost effective, high quality test leads and patch cords. The jacket features a durable colored outer layer with an inner white layer for cut or wear visibility. The conductor is highly stranded soft bare copper for additional flexibility. Meets the safety requirements of IEC 61010-031 CAT III. IEC rating: 1,000 V CAT III. Current max: 36 A. Jacket material: PVC. Conductor area: 2.50 sq mm. Wire gauge: 13 AWG. Stranding: #651 x 0.07mm diameter. Temperature: -20/+80 degree C. RoHS (2002/95/EC) compliant. Measures 3.9mm outside diameter by 10m length. Blue color.

Manufacturer: waikei Brand: waikei

Specifications If there is something wrong with LED light group, you can change it or replace the bad LED beads. Model No: SID-GJ2C Input Voltage: 85-265V International General Output Voltage: 0-300V High Brightness No Disassemble More Accurate. Double Isolated Safe Protection. Voltage and Current Intelligent Adjustment. Voltage Range: 0-300V (slow boost safety design of soft start) Testing Skills Plug in power, it can be used after 3to 5 seconds. The soft start mode make the backlight getting brighter slowly. No burn out, If you can't make sure the "+"and "-", Don't connect the probes to the LED which be tested for a long time. Open Ciruit Protection : Don't touch the output terminal of probes for a long time .It's safe for touch the probes in short time periods. Double Isolate Design makes our tester safety with high strength and flame retardancy materials. Single LED light bar backlight testing Make sure the anode and the acthode. Connect the probes on the anode and the cathode. Light up the Single LED light Bar Backlight. Light up the Double LED Light Bar Backlight. Packing Includes 1 x TD 0-300V Output Voltage All Size LED LCD TV Backlight Tester 2 x Table pen

Manufacturer: Fluke Corporation Brand: Fluke Model: HC200

Set of four hook clips (two red and two gray). Designed for use with VPS200, VPS100 and PM8918 series probes.

Manufacturer: Fluke Corporation Brand: Fluke Model: HC200

Set of four hook clips (two red and two gray). Designed for use with VPS200, VPS100 and PM8918 series probes.