Electrical Testing - Page 56

Manufacturer: Hioki Brand: Hioki

Hioki DT4256 Digital Multi Meter Fully Loaded DMM with 11 Functions For General Purpose Electrical Testing The DT4256 is a digital multimeter designed to deliver maximum functionality for use in a wide range of settings, including instrumentation testing with a 4-20 mA% conversion function. The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. Field-Proven Strength and Usability DT4200 series Robust design capable of withstanding a drop from a height of 1 m onto concrete To test our products' ability to withstand mechanical shock, we repeatedly drop them from a height of at least 1 m until they break. This drop-testing regime leads to more robust products by fostering a series of design improvements. Preventing instrument failure by keeping out dust If dust gets into the instrument's enclosure, it can cause the device to fail. Since dust can get into the instrument especially easily through the gap around the rotary switch, the DT4200 series incorporates a dustproof part known as an O-ring where the rotary switch is mounted to improve the device's dust resistance. Fast, accurate measurement of the output voltage on the secondary side of an inverter The DT series can accurately measure the voltage on the secondary side of an inverter, just like a power meter. Its low-pass filter rejects harmonic components so that the fundamental wave can be isolated and accurately measured. True RMS measurement for accurate measurement of even distorted current waveforms Current waveforms are often distorted, causing the average-value and true RMS measurement methods to yield different results. To obtain accurate readings, RMS measurement is indispensable

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS410-II-B

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Tenmars TM-192D Brand: Tenmars TM-192D Model: TM-192

Features: •Frequency response: 30Hz to 2000Hz. •Sensor: Triple Axis (X, Y, Z). •Range: 20/200/2000 mG,2/20/200μT. •Data hold (HOLD). •Maximum hold (MAX). •Minimum hold (MIN). •TM-192D is built in the USB datalogger with the capacity of 500 data sets or 9999 data sets. Applications:It is applied to measuring electromagnetic fields of extremely low frequency (ELF) of 30 to 2000Hz. They are capable of measuring the electromagnetic field radiation intensity produced from: •Electric transmission equipment •Power line. •Microwave oven. •Air conditioner. •Refrigerator. •Computer monitor. •Video/audio device and so forth. Specifications: •Display: 4 digits LCD, maximum reading 9999. •Range: 20/2000 mG, 2/20/200uT. •Resolution: 0.1/1 mG or 0.001/0.01/0.1 uT. •Frequency response: 30Hz to 2000Hz. •Sensor: Triple Axis. •Accuracy: +/- (2.5%+5dgt) at 50Hz/60Hz, +/- (5.0%+5 dgt) at 30Hz~2000Hz. •Sample rate: 2.5 times per second. •Battery: 9V NEDA 1604, IEC 6F22 or JIS 006P. •Accessories: User's manual, 9V battery, Carrying case, MINI USB 4P(MALE) to USB A Type cable, CD disk

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS410-II-B

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Corporation Brand: Fluke Model: BC7217

External Battery Charger, For Graphical Multimeter

Manufacturer: UEi Test Instruments Brand: UEi Test Instruments Model: DL379COMBO

UEi Test Instruments designed the DL379 for professionals; in this kit it's combined with a pipe-clamp probe for easy temperature measurement. The DL379 is packed with features for the real-world: backlight, worklight, magnet for hands-free operation, test lead holder, detachable clamp head, safety input jack lock and CATIII safety rating. UEi Test Instruments has over 45 years experience designing and manufacturing a broad range of award-winning, industry-leading Test and Measurement Tools. UEi Test Instruments are sold throughout North America and Canada and professionals recognize the UEi brand for quality and innovative features designed to solve real-world problems. UEi's NIST-certification laboratory is compliant with ISO17025. UEi backs its products with dedicated technical support, service and repair teams.

Manufacturer: Hantek Brand: Hantek

Channel:2 Channels Bandwidth:80MHz Shot bandwidth:DC to 80MHz Input Impandence:1MΩ 25pF Max. Sample rate:250MS/s Vertical resolution:8Bit Gain range:10mV-5V, 9Steps DC accuracy:±3% Timebase range:4ns-1h, 38 Steps Vertical adjustable:Yes Input protection:Diode clamping X-Y:Yes Autoset:Yes (30Hz to 80MHz) EXT. input:Yes Trigger Mode:Auto, Normal and Single Trigger Slope:+/- Trigger level adjustable:Yes Trigger Type:Rising edge, falling edge Trigger Source:CH1, CH2,EXT Pre/Post trigger:0-100% Buffer size:10K-64KB/Channel Sampling selection:Yes Waveform Display:port/line, waveform average, persistence, intensity Network:Open/Close Vertical mode:CH1, CH2, Dual, ADD Cursor measurement:Yes Math:FFT, addition, subtraction, multiplication, division Cursor:Frequency, Voltage Data Samples:10K-64K/Channel Operating system: Windows 7, Windows NT, Windows 2000,Windows XP, VISTA Supply DEMO code(VC、CVI、VB、LABVIEW) and technical support Excellent industrial design-the same anodised aluminium casing as iPad, which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy surface, and has good heat resistance and strong wearability. Standard USBXITM interface, easily inserts into USBXITM housing to make up a combination instrument. High performance, 250MS/s real-time sampling, 80MHz Bandwidth, Operating System: Windows 7, Windows NT, Windows 2000, Windows XP,VISTA. 23 measurement functions, PASS/FAIL Check, be suitable for technical application. Waveform average, persistence, intensity,invert,addition, subtraction, multiplication, division,X-Y plot.

Manufacturer: Amprobe Brand: Amprobe Model: SM-CAL1

The Amprobe SM-CAL1 is a sound meter calibrator for maintaining the accuracy of a sound level meter. It fits sound meters with microphones that have a diameter of up to 1/2 inch. It produces two fixed sound level signals, 94 decibels (dB) and 114 dB, and has an output frequency of 1,000 hertz (Hz). The calibrator operates on a 9V battery (included), and a low-battery indicator shows when the unit's batteries need to be changed. It meets European conformity (CE) directives and complies with American National Standards Institute (ANSI) and International Electrotechnical Commission (IEC) standards. The SM-CAL1 weighs 0.6 lb. (285 g), and it measures 4.9 x 1.9 x 0.5 inches (125 x 48 x 12.7) mm, H x D, where H is height, the vertical distance from the lowest to highest point, and D is diameter, the distance from left to right across the widest part of a circle).Sound meters measure sound pressure levels both to check acoustic fidelity and to verify compliance with noise pollution regulations in health and safety codes. The meters are used in a range of environments, including homes, schools, airports, automotive and machine shops, concert halls, recording studios, and hospitals. There are two classes of sound level meters. Type 1 sound meters have a wider frequency response and a tighter tolerance than type 2 sound level meters, and they are commonly used in applications that require precise measurements, such as research and law enforcement. Type 2 sound meters are less precise than type 1 meters and are used for taking general measurements, such as measuring noise levels in a machine shop. Sound level meters are weighted for frequency response according to their intended use. The most commonly used weightings are A, C, and Z. The A weighting imitates the response of the human ear to soft or moderate noise levels and can be used in most environmental noise measurement applications. The C weighting imitates the response of the human ear to loud noises and can be used in noisy environments. The Z weighting measures fla...

Manufacturer: TENMA Brand: Tenma Model: 72-6782

TENMA 72-6782 INSULATION TESTER, 1000V, 1000MOHM

Manufacturer: F2C Brand: F2C Color: black

A Refrigerant Charging Scale is ideal for HVAC and refrigeration service, including the critical charging of small refrigeration systems. This Refrigerant Charge Scale offers the highest accuracy of +/-0.25oz.(5grams.), delivering dependability to get the job done right. The slip resistant platform handles all types of refrigerant cylinders with ease. It's really an ideal tool for recharging and recovering all types of refrigerants. Features: High capacity: 220lbs.(100kg) Three display modes: kgs, lbs and oz. Extra large LCD display with background lamp Slip-Resistant 9" x 9" weighing Platform Built-in memory remembers previous reading Flexible long coil design Rugged, compact design, completely portable High accuracy and resolution Can be used with all refrigerants Heavy duty carrying case included Specification: Capacity: 220lbs. (100kg) Accuracy: +/- 0.5% of reading Resolution: 5g /0.010lbs./0.25oz. Power: 9V DC Unit: Lb/Kg/OZ Operation temperature: 32°F to 113°F (0°C to 45°C) Weight: 2.485kg(5.47OZ) Platform size: 9" x 9" Overall dimension: 9" x 9" x 1 1/2" Package Included: 1 x Refrigerant Charging Scale 1 x Heavy-duty Carrying Case 1 x English User's Manual