|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $239.58 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLK-CNX-a3000
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLK-CNX-a3000
|
The CNX a3000 AC Wireless Current Clamp Module is part of the Fluke team of wireless troubleshooting tools.Connect the CNX a3000 AC Wireless Current Clamp Module to your test point and view the results up to 20 meters away on the CNX Wireless Multimeter. You’ll save time with fewer run-arounds collecting multiple measurements. Use multiple modules for measurements on three-phase systems, use as a stand-alone measurement tool, or combine with other CNX modules as a system for multiple measurements. From short distances you can even view readings from modules through closed electrical panels. Plus, using the optional PC adapter, there will be no more writing down data as the CNX remote modules capture up to 65,000 sets of time stamped min/max/avg readings. CNX wireless test tools also offer increased safety by letting you view readings in a separate location from the test point. Now you can take readings on moving machinery with only the measurement module in harm’s way.Using the optional PC adapter, the CNX wireless troubleshooting system can track up to 10 measurement modules simultaneously, with results sent to a PC for further analysis.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $245.00 7% OFF
Manufacturer: GW Instek
Brand: GW Instek
Model: GFG-8216A
Manufacturer: GW Instek
Brand: GW Instek
Model: GFG-8216A
The GFG-8200A product family offers a complete solution in generating signals at the 3 MHz/5 MHz ranges. All models are embedded with standard functions such as TTL/CMOS/Ramp output, External voltage controlled frequency (VCF), and built-in 6-digit counter. the GFG-8200A series are made to accommodate the applications in audio response testing, vibration testing, servo system evaluation, ultra sound application, etc. Frequency range: 0.3Hz to 3 MHz. Power Source, 100 MHz Bandwidth: 115V/230V AC, +/-15 percent, 50/60Hz. Measures 251mm width by 91mm height by 291mm depth.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $249.00 1% OFF
Manufacturer: TekBox
Brand: Tekbox
Manufacturer: TekBox
Brand: Tekbox
.da-ilf-gsep{ background-color: #7e7f82; } .da-ilf-gsep h3{ color: #ffffff !important; }
-
5.0 of 5.0 with 2 Reviews
SALE PRICE: $249.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BP7235
Manufacturer: Fluke Corporation
Brand: Fluke
Model: BP7235
Fluke NIMH rechargeable battery pack. Provides typical 16-hour battery life when used in 700 or 740 calibrator. 6 1.2V DC Ni-MH cells in custom-molded ABS/PC-blend case. Measures 7.1-inches length by 2.2-inches width by 0.9-inches height. 1 year warranty.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $250.25 23% OFF
Manufacturer: GW Instek
Brand: GW Instek
Model: GFG-8219A
Manufacturer: GW Instek
Brand: GW Instek
Model: GFG-8219A
The GFG-8200A product family offers a complete solution in generating signals at the 3 MHz/5 MHz ranges. All models are embedded with standard functions such as TTL/CMOS/Ramp output, External voltage controlled frequency (VCF), and built-in 6-digit counter. Further versatility of Logarithmic and Linear sweep, GCV output feature and AM/FM modulation is added. All these integrated functions and user-friendly operations of the GFG-8200A series are made to accommodate the applications in audio response testing, vibration testing, servo system evaluation, ultra sound application, etc. Frequency range: 0.3Hz to 3 MHz. Power Source, 100 MHz Bandwidth: 115V/230V AC, +/-15 percent, 50/60Hz. Measures 251mm width by 91mm height by 291mm depth.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $255.55 5% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 193-24-BK
Manufacturer: AEMC
Brand: AEMC
Model: 193-24-BK
24" Model 193-24-BK is a AmpFlex sensor with 10' leads. Model 193-24-BK is of 6500A capacity. For use with models 8220, 8230, 3945/3945-B and 8335.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $255.55 5% OFF
Manufacturer: AEMC
Brand: AEMC
Model: 565
Manufacturer: AEMC
Brand: AEMC
Model: 565
|
The TRMS clamp-on leakage current meter model 565 is designed to measure low AC currents, which are typically leakage currents in ground conductors. Low currents are measured using either 60mA or the 600mA range. The high sensitivity of the probe (10 microampere and 100 microampere) is possible through special jaw construction and, in particular, critical shielding of the jaws. At low measurement levels, this shielding out of the noise is critical for low sensitivity, accuracy and stability. The Model 565 may be used as a standard clamp-on meter measuring to 100A RMS, as well as AC volts and DC volts, resistance and continuity (with a buzzer). Clamp-on leakage current meter is ergonomic in design and fits well in the hand, facilitating one hand operation. The jaw size is compact yet designed to accommodate the most common conductors up to 1" in diameter. Measures 8-1/2" length by 2-1/2" width by 1-11/64" height. Operating temperature range: 32 to 104 degree F. Storage temperature range: 14 to 140 degree F.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $260.00 1% OFF
Manufacturer: OWON
Brand: AKTAKOM
Manufacturer: OWON
Brand: AKTAKOM
ADS-2031 30MHz bandwidth 2 channel digital storage oscilloscope with a 250MSa/s sample rate and an 8″ color TFT-LCD display and USB flash storage support.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $266.88 1% OFF
Manufacturer: GW Instek
Brand: GW Instek
Model: GFC-8131H
Manufacturer: GW Instek
Brand: GW Instek
Model: GFC-8131H
The GFC-8000 Series performs virtually all of the counting measurements required in laboratories, in terms of both period and frequency. A bright red 8 digit LED display with an included overflow indicator provides a clear view. Both models feature a stable time base with a maximum resolution of 100nHz and 10nS at 1Hz for frequency and period measurement, respectively. Gate time can be configured for fast response (5 digits/10ms) or accuracy (7 digits/s) for more control. For high frequency needs, the GFC-8270H can operate at up to 2.7GHz. The GFC-8000 Series features easy operation with a simple front panel interface, suitable for both portable and bench-top use. Temperature: 5ppm, 23 to +/- 5 degrees_celsius. 0.01Hz to 1.3GHz Frequency range.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $268.96 4% OFF
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 308A
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 308A
|
The B&K Precision 308A digital megohmmeter is an insulation tester with three test voltages—250, 500, and 1,000V—for measuring insulation resistance to 2,000MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment, and it also measures low-resistance to 2,000Ω and AC voltage to 600V, lighting a warning indicator when a live circuit is detected. When a resistance measurement is complete and the test button is released, residual voltage is automatically discharged from the circuit under test. The test button can be locked for extended measurement sessions. Overload protection helps prevent damage to the meter. The meter is built into a carrying case and has a 3-1/2-digit LCD. It is rated for category (CAT) III installations to 600V, which covers equipment in fixed installations, such as switches in the fixed installation and some industrial equipment that is permanently connected to the fixed installation. The unit has a low-battery indicator that signals when the batteries need to be replaced. It comes with eight 1.5V AA batteries, a set of test leads, a 0.5A, 250V fuse, and instructions. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others.SpecificationsMaximum insulation resistance measured2,000MΩTest voltages250V, 500V, 1,000VMaximum low-resistance measured2,000ΩMaximum AC voltage measured600VInstallation ratingCAT III, 600VStandards metIEC safety standard 1010-1; CE markingPower(8) 1.5V AA batteriesWeight1.04kgDimensions (H x W x D)*92 x 170 x 165mm/3.6 x 6.7 x 6.5 inches*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Megohmmeters, also called insulation testers, are electrical test meters that measure resistance to the flow of current in an electrical component or circui...
|
|