|
|
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $157.97 1% OFF
Brand: Neewer
NEEWER is a registered trademark. ONLY Authorized seller of NEEWER can sell under NEEWER listings. Specifications: *USB Data transmission *USB Port /PC Data recording: 60000 *Analog bar: 26pcs *LCD backlight *LCR Auto identification measurement *Voltage *L (H):20uH/200uH/20mH/200mH/2000mH/20H/200H2000H/20KH ,?(0.5%+5). *C (F):200pF/2nF/20nF/200nF/2000nF/20uF/200uF/2000uF/20mF, ?(0.5%+5). *R (ohm):20ohm/200ohm/2Kohm/20Kohm/200Kohm/2Mohm/20Mohm/200Mohm, ?(0.3%+5). *Frequency:100Hz/120Hz/1KHz/10KHz/100KHz+ *Voltage:0.6Vrms. NEEWER is a registered trademark. ONLY Authorized seller of NEEWER can sell under NEEWER listings. Package Contents *1x LCR Meter *1x SMD Test Clip *1x USB Cable *1x CD Software *1x Socket Adapter *1x Short-circuit Plate *1x Carrying Case
-
4.0 of 5.0 with 33 Reviews
SALE PRICE: $159.00 47% OFF
Manufacturer: Reed
Brand: REED Instruments
Model: ST-MULTIKIT
Manufacturer: Reed
Brand: REED Instruments
Model: ST-MULTIKIT
|
The Reed ST-Multikit includes a digital multimeter (DMM) and a digital clamp-meter, plus accessories, for measuring current, voltage frequency, and temperature, and detecting voltage in electrical testing applications. The DMM is the Reed ST-922 that measures AC (alternating current) and DC (direct current) to 10A (amperes), AC and DC voltage to 600V, capacitance to 200 microfarads, frequency to 10 megahertz, resistance to 40 megohms, and temperature to 760 degrees C (1,400 degrees F). The clamp meter is the Reed ST-9800T that measures AC and DC to 600amp, AC and DC voltage to 600 volts, capacitance to 100μF (microfarads), frequency to 10MHz (megahertz), resistance to 40MΩ (megohms), and temperature to 760 degrees C (1,400 degrees F). It has a clamp with two jaws that can close around an electrical conductor up to 33mm (1.3 inches) in diameter to measure current without touching or interrupting the circuit. Both meters have a rotary switch to select the property to measure, and a 4,000-count LCD. They also feature a data hold function that keeps the most recent reading on the display after disconnecting from the circuit, a continuity buzzer that confirms that the circuit conducts electricity, and a diode check that detects whether a circuit's diodes are working properly. A K-type thermocouple probe is included for measuring temperature and is compatible with both meters. In addition to the meters and the probe, the kit comes with the Reed AC-9 non-contact voltage (NCV) detector, the Reed AC-006 line splitter, a set of test leads, and a soft carrying case. The NCV senses AC voltage to 600V without making contact with the circuit, triggering a red LED when voltage exceeds 100V. A flashlight is built into the NCV for visibility in low light. The line splitter is for use with the clamp-meter to enable measurement of AC to 15A on two-wire and three-wire power cords.Both meters meet EN (European Standard) safety standard 61010-1. The DMM is rated for CAT (category) III installations to 600V, which covers equipmen...
-
4.0 of 5.0 with 23 Reviews
SALE PRICE: $159.00 1% OFF
Manufacturer: Made in usa
Brand: awasy2415
Manufacturer: Made in usa
Brand: awasy2415
&NEW OLD STOCK W/O BOXA LITTLE BIT DIRTY AND SCRATCHES ON SURFACE !!!(ZS1-2-7) FREE! Sellers: Add a FREE map to your listings. FREE!Exported By ExportYourStore
-
4.0 of 5.0 with 18 Reviews
SALE PRICE: $160.00 1% OFF
Manufacturer: Supco
Brand: Supco
Model: M501
Manufacturer: Supco
Brand: Supco
Model: M501
|
The Supco M501 electronic megohmmeter is an insulation tester with a 1,000V test voltage for measuring insulation resistance to 1,000MΩ to indicate the condition of windings or cables in motors, switchgears, electrical installations, and other insulated equipment. The meter displays readings on a zone-type scale that indicates "bad", "caution", or "good" insulation condition. It is built into a hard-shell case for portability and protection. The unit comes with a set of test leads and instructions. Megohmmeters are commonly used for electrical maintenance and testing in industries such as HVAC, transportation, manufacturing, mining, and utilities, among others. SpecificationsMaximum insulation resistance measured1,000MΩTest voltage1,000VPower(2) D batteries (sold separately)Weight1.8 lb.Dimensions (H x W x D)*9.25 x 6.5 x 3 inches*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Megohmmeters, also called insulation testers, are electrical test meters that measure resistance to the flow of current in an electrical component or circuit and check the continuity of an electrical circuit to detect electrical problems such as degraded insulation and improper circuit connections in equipment, wiring, and power supplies. Resistance is an indicator of the overall condition of the device being tested. Megohmmeters have an internal power supply, such as a battery or a capacitor, which supplies a test voltage to a circuit or component that is turned off. Test leads are connected in a series to the tester and the circuit or device being tested. The meter calculates the difference in voltage between the leads and measures the resistance. Most megohmmeters have two terminals for test lead attachment. The two-terminal, or two-wire, measurement method includes the resistance of the circuit or device being tested and the resistance of the test leads, and generally provides sufficient accuracy for...
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $160.13 1% OFF
Manufacturer: Pico
Brand: Pico
Manufacturer: Pico
Brand: Pico
|
PicoScope 2204A 2 channel + AWG, 10MHz, Includes probes Powerful, portable, and versatile The PicoScope 2200A Series oscilloscopes offer a small, light, modern alternative to bulky benchtop devices. You can now fit a 200 MHz, 1 GS/s instrument easily in your laptop bag or even in your pocket! They are perfect for engineers on the move; ideal for a wide range of applications including design, test, education, service, monitoring, fault finding, and repair. Â A small form factor is not the only benefit of these PC-based scopes. With our PicoScope 6 software, high-end features such as serial decoding and mask limit testing are included as standard. New functionality is regularly delivered through free upgrades. Fast sampling The PicoScope 2200A Series oscilloscopes provide fast real-time sampling rates up to 1 GS/s, equivalent to a timing resolution of only 1 ns. For repetitive signals, equivalent-time sampling (ETS) mode can boost the maximum effective sampling rate up to an incredible 10 GS/s, allowing even finer resolution down to 100 ps. All scopes support configurable length pre-trigger and post-trigger capture. At slower sampling rates the oscilloscope can stream data continously across the USB link bypassing the on-board buffer memory. In this mode PicoScope can collect waveforms with as many as 100 million samples. This deep memory is ideal for long captures of serial data that can then be decoded using the included serial decoding tools. Arbitrary waveform and function generator All PicoScope 2200A Series oscilloscopes have a built-in arbitrary waveform generator (AWG). Waveforms can be imported from data files or created and modified using the built-in graphical AWG editor. A function generator is also included, with sine, square, triangle, DC level and many more standard waveforms. As well as level, offset and frequency controls, advanced options allow you to sweep over a range of frequencies
-
4.0 of 5.0 with 23 Reviews
SALE PRICE: $162.99
Manufacturer: STANDARD INSTRUMENTS CO LTD
Brand: Reed Instruments
Model: R5030
Manufacturer: STANDARD INSTRUMENTS CO LTD
Brand: Reed Instruments
Model: R5030
This compact autoranging True RMS clamp meter is capable of measuring AC/DC current (50, 500A) and voltage (AC: 500mV, 5, 50, 500, 750V/ DC: 500mV, 5, 50, 500, 1000V ), resistance (500Ω, 5, 50, 500kΩ, 5, 50MΩ), frequency, capacitance (500, 5000nF, 50, 500µF, 5mF), duty cycle and temperature (-148 to 1832°F (-100 to 1000°C)). Featuring a 50,000 count backlit LCD display, double molded plastic housing, the R5030 includes diode check and continuity functions and a non-contact voltage detector built into the clamp tip.
-
4.0 of 5.0 with 2 Reviews
SALE PRICE: $164.39 14% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: RS-1007 PRO
Manufacturer: Amprobe
Brand: Amprobe
Model: RS-1007 PRO
|
The Amprobe RS-1007 Pro analog clamp meter is an average-sensing, manual-ranging multimeter for measuring current, voltage, and resistance in electrical testing and heating, ventilation, and air-conditioning (HVAC) applications and in environments where very hot or very cold temperatures might interfere with the performance of a digital meter. This analog meter displays measurements with a needle that moves on a calibrated scale. It has a broader operating temperature range than digital multimeters and can be used outdoors. It has a clamp that measures alternating current (AC) to 1,000 amp, and comes with detachable test leads that measure AC voltage to 600 volts (V) and resistance to 1,000 ohms. The clamp has two jaws that close around an electrical conductor up to 1.88" (47 mm) in diameter to measure current without touching or interrupting the circuit. The needle lock secures the needle in place to protect it from damage during transport and to hold it at a reading, even after the meter is disconnected. The resistance measurement also tests for continuity and confirms that the circuit conducts electricity. A finger guard on the body of the meter helps protect fingers from shock.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is a manual-ranging meter and requires that the operator choose the appropriate operating range. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 600V, which covers measurements at the source of the low-voltage supply, such as electricity meters and overcurrent protection devices. The meter comes with a soft vinyl carrying case. The meter does not require batteries for measuring current or voltage.SpecificationsMaximum alternating current (AC) input1,000 ampMaximum AC voltage input600 volt (V)Maximum resistance detected1,000 ohmsPower...
-
4.0 of 5.0 with 34 Reviews
SALE PRICE: $165.00
Manufacturer: Probe Master
Brand: Probe Master
Model: 5904-1
Manufacturer: Probe Master
Brand: Probe Master
Model: 5904-1
Passive Voltage Probe, 400MHz, 10X, 600V, 3.5ft
-
4.0 of 5.0 with 11 Reviews
SALE PRICE: $166.60 1% OFF
Manufacturer: Teledyne LeCroy
Brand: Teledyne LeCroy
Manufacturer: Teledyne LeCroy
Brand: Teledyne LeCroy
Test Accessories - Other WaveSurfer Thermal Paper 112mmX25m Roll
-
4.0 of 5.0 with 1 Reviews
SALE PRICE: $167.07 7% OFF
Manufacturer: StandardPlumbing: Kohler
Brand: Armada
Model: Pro91
Manufacturer: StandardPlumbing: Kohler
Brand: Armada
Model: Pro91
The Armada Technologies Pro91 is a unique, brand new True RMS Automatic Clamp multimeter that has no peer. This one-of-a-kind meter combines the accuracy of True RMS with the sophistication and ease of a completely automatic meter. There is literally only an on/off button to work with, everything else is done automatically by the Pro.
|
|