Electrical Testing - Page 589

Manufacturer: Megger Brand: Megger Model: 249005

The Megger 249000 series calibration shunt calibrates a Megger 247000 series or DLRO10 series digital low resistance microhmmeter (sold separately). The shunt verifies the accuracy of the microhmmeter because the resistance of the shunt at a given current is known. The 249000 series is used to conduct more accurate resistance tests with a DLRO10 series microhmmeter.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Manufacturer: Pico Brand: Pico

Pico 1216 PicoLog 1216 with Terminal Board   A distinguished pedigree The PicoLog 1000 Series is the result of a distinguished lineage that goes back to the release of our first multichannel data logger - the ADC-11 - in 1993. The original ADC-11, and its successor the USB ADC-11, proved to be the perfect choice for users wanting a low-cost way to measure and record multiple signals. The PicoLog 1000 Series builds on this success to give you the same low-cost data acquisition but with greater power and performance. (Because the ADC-11 was so popular we've also added a USB ADC-11 compatibility mode which allows you to use your PicoLog 1000 logger as a direct replacement to the USB ADC-11.) An expandable multichannel data acquisition system The budget model PicoLog 1012 has 12 input channels and 10 bit resolution. The powerful PicoLog 1216 has 16 channels and 12 bit resolution. Need more channels? No problem. Using PicoLog you can connect up to 4 Pico data loggers to one PC - giving you a potential 64 channel PicoLog 1000 Series data acquisition system, or the ability to use your PicoLog 1000 logger with other devices such as the USB TC-08 Thermocouple Data Logger. Optional Terminal Board The optional terminal board has screw terminals to allow sensor wires to be attached to the data logger without soldering. The terminal board also has locations where you can fit resistors to offset and extend the input ranges of the logger. Fast and accurate With 10 or 12-bit resolution and multiple sampling modes, a PicoLog 1000 Series logger will meet your data logging needs

Manufacturer: Probe Master Brand: Probe Master Model: 4918

3 Probe Master Kit includes (2) 4905-2RA, 10X, (1) 4902-2, 1X/10X, Includes 21 accessories and case

Manufacturer: LeCroy Corporation Brand: LeCroy Model: PACC-ZD007

Replacement accessory kit for active differential probe.

Manufacturer: AEMC Brand: AEMC Model: 2970.95

Replacement fuse set, 600 volts, 0.2 amps, 5mm x 20mm for 6501 megohmmeter.

Manufacturer: Hioki Brand: Hioki Model: 9010-50

Simply connect to a tester or recorder to easily measure large currents. CE mark compliant CAT III 600V. For more accurate waveform recordings and analysis of harmonic signals, etc. Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10,000 times. Rated Current: AC 10/20/50/100/200/500 A. Accuracy: +/-2 percent rdg. +/-1 percent f.s. (45 to 66Hz). Frequency characteristics: Add to amplitude accuracy for frequencies from 40 to 1kHz: +/-6 percent rdg. (at 10A and 20A range). +/-3 percent rdg. (for 50A range and above). Output rate: 0.2V AC f.s. (Connect to a voltage input device providing a high input impedance of milliohm). Max. current input: (For 40Hz to 100Hz: 100 percent, and for 100Hz to 1kHz: within 50 percent of derating). 150A RMS continuous (10/20/50A ranges). 400A RMS continuous (100/200A ranges). 650A RMS continuous (500A range). Max. circuit voltage: 600Vrms (Insulated conductor). Measures: 3-1/16" width by 7-25/64" height by 1-3/8" depth, 1-51/64" diameter, cord length: 3 meter.

Manufacturer: Schneider Brand: Schneider Model: U0180001

12" ROPE CT, 20-5000A, 1%, 8' LEADS

Manufacturer: ZYB Brand: ZYB

Usually the product will be sent in 2-5 working days and takes about 3--9 business days to reach you Description 0.5-60 MHz Color Graphic VNA Analyzer Pocket-Size, Incredible Performance! Truly accurate SWR, R, X and Z! This pocket-sized wonder breaks the mold for analyzer design with user-friendly convenience, top notch accuracy, and a vivid TFT multi-color display. Don`t let the size fool you, it is packed with all the VNAfeatures and performance you need! For example, get data for SWR, resistance (R), reactance (X), and impedance magnitude (Z) delivered on a color-coded high-resolution bar-graph display or sharply defined swept-frequency plots. Get continuous DDS frequency coverage with 100-Hz resolution and a full selection of tuning steps and sweeps. There's a movable marker that calls up alpha-numeric data for any point on any plot -- and a memory to capture current data when you turn the analyzer off. Get other useful features too, like a built in help menu and a field-strength indicator warns when powerful interference is present. Best of all, juggling batteries is a thing of the past -- a long-running lithium-polymer power source is built right in. Recharge via any USB port. Specification Display: Sharp Transflective TFT, 1600 million colors VSWR 1.00 - 99.99, million level below market instruments Frequency range :0.5-60MHz Frequency stability: 500mA) Charge indicator: Hidden

Manufacturer: Mueller Electric Brand: Mueller Electric

Test Plugs & Test Jacks Black Set Screw Ban

Manufacturer: Smiths Connectors / IDI Brand: Smiths Connectors / IDI

Contact Probes HEADED 90 DEG CONVEX