|
|
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $299.73 34% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: ACD-41PQ
Manufacturer: Amprobe
Brand: Amprobe
Model: ACD-41PQ
|
The Amprobe ACD-41PQ digital clamp meter is true RMS (root mean square) sensing, auto-ranging multimeter for measuring current, voltage, resistance, frequency, temperature, harmonics, power factor, and real, reactive, and apparent power in industrial electrical testing applications. It has a clamp that measures alternating current (AC) to 1,000 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), resistance to 1,000 ohms, and frequency to 500 hertz (Hz). The clamp has two jaws that can close around an electrical conductor up to 1.77" (45 mm) in diameter to measure current without touching or interrupting the circuit. The meter comes with a K-type thermocouple probe for measuring temperature. Power factor, real power, reactive power, and apparent power readings provide data on the power efficiency of an electrical system. The meter measures fundamental total harmonic distortion (THD) and individual harmonics, which can degrade the quality of the power being supplied by the system. Automatic detection mode selects voltage or current function based on input. The peak hold reading displays the maximum measurement of a current or voltage surge. An audible continuity sensor confirms that the circuit conducts electricity. The hold function keeps the reading on the display, even after the meter is disconnected. The backlit liquid crystal display (LCD) is visible in low light. The unit automatically turns off after 17 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock. This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal wave...
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $300.00
Manufacturer: ProComSol
Brand: ProComSol
Model: HM-USB-ISO
Manufacturer: ProComSol
Brand: ProComSol
Model: HM-USB-ISO
HART Foundation registered compliant HART Modem with a USB interface. Connects your PC to your HART instruments for configuration and monitoring. Electrically isolated for enhanced safety and performance
-
5.0 of 5.0 with 5 Reviews
SALE PRICE: $304.78 2% OFF
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 4005DDS
Manufacturer: B&K Precision Corporation
Brand: B&K Precision
Model: 4005DDS
The BK Precision model 4005DDS is a versatile 5 MHz DDS (direct digital synthesis) function generator with a 4-digit display. The instrument generates sinusoidal, triangular, and square waveforms over the 1 Hz to 5 MHz range. The output voltage can be varied from 0 to 10 Vp-p into 50 ohms or to 20 Vp-p into open circuit. A continuously variable DC offset allows the output to be injected directly into circuits at the correct bias level.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $306.95 21% OFF
Manufacturer: BK Precision
Brand: B&K Precision
Model: 9111
Manufacturer: BK Precision
Brand: B&K Precision
Model: 9111
Model 9111 is a new type of power supply. Unlike conventional power supplies with fixed output ratings, it automatically recalculates voltage and current limits for each setting, providing any Volt/Amp combination within the rated power. By providing greatly expanded choices of maximum power Volt/Amp combinations, users can cut down on the number of power supplies required and free up valuable bench space.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $309.11 5% OFF
Manufacturer: Amprobe
Brand: Amprobe
Model: AMB-25
Manufacturer: Amprobe
Brand: Amprobe
Model: AMB-25
This affordable and rugged megohmmeters are fast and easy to use, and offer the features you need for most insulation test applications including wires, cables, transformers, and motors.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $315.24 2% OFF
Manufacturer: FLIR Systems
Brand: Extech
Model: 380976-K
Manufacturer: FLIR Systems
Brand: Extech
Model: 380976-K
|
Powerful Power Quality Testing The Extech 380976-K is a Single Phase/Three Phase 1000A AC Power Clamp Meter Kit that combines comprehensive power quality testing along with expanded clamp meter capabilities. Along with surges and dips in a plant’s main power supplies, infrastructure factors such as aging lines can affect power quality. And as the prevalence of smart metering systems in manufacturing sites increases, expect to see increased effects on power quality. In addition, power quality should be evaluated and optimized during gen-set installation and maintenance. Advanced Functionality Use the full-size Extech to measure Current, Insulation Resistance, Temperature (Type K) and Power. For example, in trying to determine if there is dirty power in one branch supply, you can measure for True Power (kW), Apparent Power (kVA), and Reactive Power (kVAR), not to mention Horsepower (HP), Power Factor, and Phase Angle with Lead/Lag indicator. The large 9,999-count readout is easy to read while performing a range of functions on this comprehensive power clamp meter. In addition to power quality functions, the True RMS clamp meter also measures AC current and AC/DC voltage, resistance, frequency and temperature. In fact, frequency can be displayed simultaneously with voltage. Other Features If you perform maintenance on heating systems or industrial heat process equipment, you can take advantage of μA current readings with 10nA resolution for flame rod tests. Capacitance testing can be performed up to 7000μF with 0.001μF resolution. Investigate resistance issues with a rating up to 100MΩ and temperatures up to temperature to 1000ºF using the included thermocouple bead wire probe. The useful Data Hold function freezes the display while the Min/Max function tracks and displays minimum and maximum values – even tracking with elapsed time. The 380976-K kit comes with a professional set of test lead accessories to simplify a range of testing scenarios: two CAT IV-600V 72" (1.8m) lead extensions...
-
5.0 of 5.0 with 3 Reviews
SALE PRICE: $315.45 7% OFF
Manufacturer: Hantek
Brand: Hantek DSO5202P
Model: DSO5202P
Manufacturer: Hantek
Brand: Hantek DSO5202P
Model: DSO5202P
|
Features: •200/100/70MHz bandwidths •1GSa/s real time sample rate •large (7.0-Inch) color display, wvga(800x480) •record Length up to 40K •trigger mode: edge/pulse width/line selectable video/slop/overtime etc. •USB host and device connectivity, standard •multiple automatic measurements •four math functions, including fits standard •provides software for PC real-time analysis specifications: •model:dso5202p •bandwidth:200MHz •channel:2 •real-time sample:1GSa/s •equivalent sample:25GSa/s •memory depth:40K •Rise time:1.7NS •time base accuracy:±50ppm •time base range:2NS/div-40s/Div •input impendance:1mω •Volts/Div range:2mV/div~5v/Div •a/D converter:8 bit •position range:±50v(5v/Div),±40v(2v/div~500mv/Div), ±2v(200mv/div~50mv/Div),±400mv(20mv/div~2mv/Div) •DC gain accuracy: ±3 percent for normal or average acquisition mode, 5V/Div to 10mV/Div; ±4 percent for normal or average acquisition mode, 5mV/Div to 2mV/Div •bandwidth limit:20MHz •trigger types:edge,video,pulse,slope, over time, alternative •trigger source:CH1,CH2,ext,ext/5, AC line •math:+,-,x,÷,FFT •cursor measurement: voltage difference between cursors: △V; time difference between cursors: △T; reciprocal of △T in hertz (1/δt); •auto measurement: frequency, period, mean,pk-pk,cycli RMS,minimum, maximum, Rise time, fall time,+pulse width,-pulse width,delay1-2rise, delay1-2fall,+duty,-duty,base,vtop, vmid,vamp,overshoot,preshoot,Pre I OD mean,Pre I OD RMS, fovshoot, rpreshoot,bwidth,frf •display:7" TFT 16K color LCD,800*480 dots.
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $317.00 1% OFF
Manufacturer: Owon Technology Co., Ltd
Brand: OWON
Model: VDS2062
Manufacturer: Owon Technology Co., Ltd
Brand: OWON
Model: VDS2062
The Owon VDS2062 2+1 Channel Virtual Oscilloscope is an oscilloscope that can connect directly with PCs through a USB connection. Accommodates users with 60 MHz of bandwidth, 1 GSa/s real-time sample rate, and multiple trigger modes - edge, video, slope, pulse, and alternate. Its USB powering facilitates mobile tests under powerless conditions. The VDS2062 comes included with a power cord, software disc, 2 probes and an adjustment tool, usb cable, power adapter, silicon gel case, and a users manual. Multi-trigger option: edge, video, slope, pulse, and alternate USB isolation - less signal inference, more PC protection USB bus powering Ultra-thin body design, easy portability
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $332.95
Manufacturer: Digilent
Brand: Digilent
Manufacturer: Digilent
Brand: Digilent
Analog Discovery 2 is the most affordable all-in-one instrument with the performance required for real engineering challenges. Makers and hobbyists can debug embedded systems, electronics, robotics or sensors with the free and easy to use software. Engineers and designers can perform automated testing & control with LabVIEW and Python drivers. Connect Analog Discovery 2 to any PC (Mac, Linux, or Windows) over high-speed USB. It is a PC-based mixed-signal oscilloscope, logic analyzer, spectrum analyzers, waveform generators, data loggers, variable power supplies, and more
-
5.0 of 5.0 with 1 Reviews
SALE PRICE: $334.28 5% OFF
Manufacturer: Psiber Data Systems
Brand: Psiber Data
Model: LM35
Manufacturer: Psiber Data Systems
Brand: Psiber Data
Model: LM35
|
The LanMaster 35 is a new handheld tester used for installing and maintaining Local Area Networks (LAN) using Power over Ethernet (PoE). The LanMaster 35 Power and Link Tester conducts power tests with actual loads to ensure that when a powered device such as a VoIP phone, wireless access point or security camera is connected to the network it will operate properly. The LanMaster 35 identifies whether power is IEEE 802.3af compliant or a legacy configuration, such as Cisco Inline power, for correctly connecting powered devices. The unit measures Loop Resistance to quickly identify damaged cables and bad punchdowns that cause intermittent problems or equipment malfunction. The LanMaster 35 provides Link speed and duplex mode testing capabilities for verifying connectivity of a powered or unpowered 10/100/1000BaseTX Link. The unit measures cable length and can be connected to a wall outlet to identify a connected port on a switch or hub. The LanMaster 35 is an essential tool for installing and maintaining networks that utilize the latest PoE (Power over Ethernet) technology.
|
|