|
|
-
3.9 of 5.0 with 15 Reviews
SALE PRICE: $9.65
Manufacturer: TOOGOO (R)
Brand: TOOGOO(R)
Color: Black
Manufacturer: TOOGOO (R)
Brand: TOOGOO(R)
Color: Black
|
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration. TOOGOO(R) Digital LED Voltage Meter Ammeter Voltmeter with Current Transformer AC80-300V 0-100.0A Dual DisplayMeasurement range: AC 80-300V 0-100.0A Power supply: < 0.2V*A Installation: Embedded installation Accuracy: 1% ?? 2digit Measurement speed: about 2 times per second Display type: LED digital tube Display size: 5.7 * 3.4cm / 2.2 * 1.3in Product size: 7 * 4.2 * 3.5cm / 2.8 * 1.7 * 1.4in Product weight: 63g / 2.2oz Package including: 1 * Digital LED AC Voltmeter / Ammeter 1 * Current TransformerNote: 1. Please firstly connect the current transformer with meter. Secondly connect the meter with AC 80-300V wire. After the connection, please do not touch any part of the back of the meter to avoid the electric shock hazard. 2. Misconnection between voltage input and current transformer will lead damage to the meter. Please make sure the voltage and current transformer are connected correctly. Note:Light shooting and differnent displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is ¡À1-3 cm.
-
3.9 of 5.0 with 39 Reviews
SALE PRICE: $9.66
Manufacturer: SMAKN
Brand: SMAKN
Manufacturer: SMAKN
Brand: SMAKN
Brand new and high quality.
Dual color display: red+red / red+blue / red+green.
Measurement range: DC 0-200V, DC 0-10A.
Resolution: 0.01V, 0.1mA(when current < 1A).
Refresh rate: 200ms/time.
Supply voltage: DC 3.5-28V.
Accuracy: ¡À0.3%.
Size: 4.7cm x 2.8cm.
Package Included:
1 x Digital Voltmeter
-
3.9 of 5.0 with 33 Reviews
SALE PRICE: $9.72
Manufacturer: uxcell
Brand: uxcell
Model: a15081800ux0408
Manufacturer: uxcell
Brand: uxcell
Model: a15081800ux0408
Measures current range of AC 0-50A with accuracy of Class 1.5.Clear and easy to read scale and a button for fine tuning the dial.Please Note: this is a direct-connection ammeter ,no CT needed.
-
3.9 of 5.0 with 39 Reviews
SALE PRICE: $10.00 10% OFF
Manufacturer: Instek
Brand: GW Instek
Manufacturer: Instek
Brand: GW Instek
The LCR-800 Series are high-end digital LCR meters for component/material measurements, applicable to various R&D activities and assembly lines. The large 240 x 128 dot matrix LCD display provides ample room for two measurement items and setup parameters, allowing you to grasp measurement results quickly. All test modes are able to measure supplementary factors, such as, R/Q, C/D, C/R, and L/Q. The LCR-821 also contains precise resistance measurements as a combination of absolute value and phase angle. 100 sets of measurement setup memory allow sharing a single unit among multiple testing conditions or sites. For a better viewing experience in a standard PC monitor, proprietary Windows based software is accessible via the RS-232C terminal. The handler interface is also a standard feature for LCR-826/827/829.
-
3.9 of 5.0 with 10 Reviews
SALE PRICE: $12.00 1% OFF
Manufacturer: RioRand
Brand: RioRand
Manufacturer: RioRand
Brand: RioRand
Features: Cutting size: 45.5mm x 26.5mm Dimensions: 48mm x 29mm x 21mm Display color: Red Refresh rate: about 500ms/ Wiring: POWER: Power supply DC 7-30V, Red: Battry Power + , Black: Shunt- INPUT: Measure Current DC 0 ~ 100A, Red(bigger): Shunt+ , Black(bigger): Shunt- Please refer to the picture above Package Includes: 1x Digital Ammeter 1x Current Shunt 100A/75mV
-
3.9 of 5.0 with 8 Reviews
SALE PRICE: $12.99 1% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-GS38CAP
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-GS38CAP
Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
-
3.9 of 5.0 with 5 Reviews
SALE PRICE: $12.99
Manufacturer: Minigrabber
Brand: Minigrabber
Manufacturer: Minigrabber
Brand: Minigrabber
Minigrabber to Minigrabber Test lead set: 10 leads, 5 colors, 2 of each color, 23" Total Length Tip to Tip, 28AWG, stranded, PVC Jacket, Each minigrabber is 41mm Long with a copper IC clip., Minigrabber colors are coordinated with the wire., Yellow, Green, Red, Black, White, Inexpensive, bulk packaged.
-
3.9 of 5.0 with 255 Reviews
SALE PRICE: $13.40 1% OFF
Manufacturer: Volmate
Brand: Volmate
Manufacturer: Volmate
Brand: Volmate
|
The multimeter is one of the most basic skills in electronics. It is a good assistant to test and troubleshoot faults that exist in electronic device. This Digital LCD Multimeter Voltmeter Ohmmeter Ammeter will meet your demands. Adopting durable material, it is tough enough to be used for a long time. Besides, it can be used in measuring remaining capacity of the rechargeable battery, so as to check whether the battery is fully-charged. Features: - CMOS integrated circuit and dual slope A/D conversion, auto zero and select polarity. - It will auto turn off after starting up 25 minutes. - High reliable measure range and 32 gears are more effective to avoid false operation. - Support transistor add Diode test. Specifications: - DC Voltage: 200mV/2V/20V/200V +- 0.5%, 600V +- 0.8% - AC Voltage: 200V/600V +- 1.2% - DC Current: 200A/2mA/20mA +- 1%, 200mA +- 1.5%, 10A +- 3% - Resistance: 200Ω/2KΩ/20KΩ/200KΩ/2MΩ +- 0.8% - Display: LCD, 1999 counts - Fuse Protection: F-200mA/250V. - O"ng Temperature: -0C to 40C. - Over Range Indication: Only figure "1" on the display. - Polarity Indication: "-" displayed for negative polarity. - Low Battery Indication: - /+ display - Battery: 9V (include). - Dimension: 138mm x 69mm x 31mm. Package Includes: - 1 x Volmate LCD Digital Multimeter - 1 x Instruction Manual (English) - 2 x test leads - 1 x 9V Battery Notes: - Pls do not change the inner circuit to aviod damaging the ammeter - Do not connect it to the voltage over 1000VDC or 750VAC - Make sure not connect the error measure range - Pls do not use the ammeter if the back cover is wrong - Pls remove the pen and cut off the power before replacing battery and fuze.
-
3.9 of 5.0 with 11 Reviews
SALE PRICE: $13.62 1% OFF
Manufacturer: Toolcool
Brand: Toolcool
Manufacturer: Toolcool
Brand: Toolcool
Specifications: Voltage supply: 9-12V DC Input Waveforms: Square, Sine & Triangle Impedance: 600 Ohm + 10% Frequency: 1Hz - 1MHz SINE wave: Amplitude: 0 - 3V at 9V DC input Distortion: Less than 1% (at 1kHz) Flatness: +0.05dB 1Hz - 100kHz SQUARE wave: Amplitude: 8V (no load) at 9V DC input Rise Time: Less than 50ns (at 1kHz) Fall Time: Less than 30ns (at 1kHz) Symmetry: Less than 5% (at 1kHz) TRIANGLE wave: Amplitude: 0 - 3V at 9V DC input Linearity: Less than 1% (up to 100kHz) 10mA Package included: 1 x XR2206 Function Signal Generator DIY Kit
-
3.9 of 5.0 with 38 Reviews
SALE PRICE: $13.99
Manufacturer: SMAKN
Brand: SMAKN
Manufacturer: SMAKN
Brand: SMAKN
|
Measurement range:DC 0.0-20.0A
Supply voltage: 4-30V
Display color: Red
Display mode:Three 0.56 LED digital tube
update rate:About 500 ms/time
Physical size: 48 x 29 x 22 mm (L*W* H)
Opening size: 45 x 26 mm (L*W)
Lead wire length: 14 cm(4 lines)
Operation temperature: -10 degrees~65 degrees
Measurement accuracy: ±(1% + 2 words)
Note:(please follow the instructions carefully wiring, or burn out)
The power supply end of the ammeter and measuring the ground USES a total design, that is to say, the power supply ground wire and test the ground wire is mutually, so only string ammeter test end after the electric appliances (both devices being measured between the cathode and tested equipment power of cathode)
Advice header power supply to use isolated power supply separately
Calibration instruction:
Error phenomenon one:Because of the some eclectic parts ageing and influenced by the temperature, sometimes when measuring the small current, the error of some meter become big or sometimes some meter don?t show zero without load.
Solution:When the meter is off the power, please short circuit A and B (connect A and B). Then make the meter have the electricity, the meter will automatically calibrated to zero. When the automatic calibration is over, please disconnect A and B. After this, that is ok.
Error phenomenon two:Because of the some eclectic parts ageing and influenced by the temperature, sometimes when measuring big current, the error of some meter become big.
Solution:let the meter show about half of the range (for example: range 0-10A, let meter show about 5A). At the meaning time, you adjust R7 until the meter show the value is same to the value the more digit meter show.
|
|