Manufacturer: OMRON
Brand: Omron
 |
[Model]Long-time range model(0.1 min to 10 h) [Time-limit contact]4PDT [Supply voltage] 200 to 230VAC Note: 1. Sockets and Hold-down Clips are not included with the H3YN. They must be ordered separately. 2. Only models with 24-VDC power supply are available. 3. Use the H3YN-4 or H3YN-41 Series when switching micro loads, and use the H3YN-4-Z or H3YN-41-Z Series when switching even smaller loads. Ratings [Item]H3YN-41 [Time ranges]0.1 min to 10 h(1 min,10 min,1 h,or 10 h max. selectable) [Rated supply voltage *4 *5]200 to 230VAC *1 [Pin type]Plug-in [Operating mode]On-delay,interval,flicker OFF start(selectable withDIP switch) [Operating voltage range]85% to 110% of rated supply voltage(12 VDC: 90%to 110% of rated supply voltage)*2 [Reset voltage]10% min. of rated supply voltage *3 [Power consumption]100 to 120 VAC: Relay ON: Approx. 1.8 VA(1.6 W)at 120 VAC,60 Hz Relay OFF: Approx. 1 VA(0.6 W)at 120 VAC,60 Hz [Control outputs]3 A at 250 VAC,resistive load(cos phi = 1) H3YN-4/-41 series: The minimum applicable load is 1 mA at 1 VDC(P referencevalue). Contact materials: Au-clad + Ag-alloy *1. Do not use the output from an inverter as the power supply. Refer to Safety Precautions for All Times for details. *2. When using the H3YN continuously in any place where the ambient temperatureisin a range of 45 deg.(C)to 50 deg.(C), supply 90% to 110% of the rated supply voltages(supply 95% to 110% with12 VDC type). *3. Set the reset voltage as follows to ensure proper resetting. 100 to 120 VAC: 10 VAC max. 200 to 230 VAC: 20 VAC max. 100 to 110 VDC: 10 VDC max. *4. Refer to Safety Precautions for All Timers when combining the Timerwithan AC 2-wire proximity sensor. *5. A diode to prevent reverse voltages is provided only on models withaDC power supply.
