Electrical Testing - Page 630

Manufacturer: Made in usa Brand: awasy2415

NEW IN DIRTY BOX(ZD2-3-5)Exported By ExportYourStore

Manufacturer: Made in usa Brand: awasy2415

NEW OLD STOCK W/O BOX (YL1-7-2) FREE! Sellers: Add a FREE map to your listings. FREE!Exported By ExportYourStore

Manufacturer: Applied Materials (Amat) Brand: Applied Materials (Amat)

Cable, Rf Adaptor With Intlk

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: N7021A

The N7021A pigtail cables are a replaceable accessory for use with the Keysight N7020A oscilloscope power rail probe. These cables are intended to be solder-connected to the power rail of interest and connected to the N7020A power rail probe's main cable. The cables have a small diameter so they occupy less space and are very flexible. They are constructed of high-quality materials, and their solid center conductor can withstand multiple soldering and unsoldering cycles so the cables can be reused.

Manufacturer: AEMC Brand: AEMC Model: MN261

The Model MN261 is the latest in compact AC current probes. It is designed to meet the most stringent demands in industry and electrical contracting. Model MN261 meets EN 61010, 600V, category III safety standards and is CE Marked and UL approved in Canada and United States. Model MN261 has a 20mm jaw opening and accommodate conductors up to 250MCM. The unique hooked jaw design facilitates clamping and hooking onto conductors. Polycarbonate materials and ultrasonic welding are used throughout to ensure ruggedness and overall lasting reliability. Model MN261 uses tape-wound cores to further improve its high and low end performance. Rated at 200A RMS it has a measurement range to 240A RMS. Measurement range of 0.1 to 24A, 0.5 to 240AAC. Designed for DMMs, loggers, recorders and oscilloscopes. 40Hz to 10kHz response. 100mVAC/AAC - 10mVAC/AAC output signal. Transformation Ratio: Voltage output. Overload: 240A for 10 min ON, 30 min OFF. Limit Operating Conditions: 200A permanently to 1kHz; Derating above 3kHz: 200A x (1/0.333F), F in kHz. Crest Factor: 3 at 200A RMS with an error (due to CF) of 4 percent. Working/Common Mode Voltage: 600Vrms. Output Termination: 5 feet BNC. Operating Temperature: 14 to 131 degree F. Storage Temperature: -40 to 158 degree F. Operating Relative Humidity: 10 to 35 degree C 85 percent RH (without roll-off above 35 degree C). Measures 5-15/32" length by 2" width by 1-11/64" height. Polycarbonate Material: Polycarbonate with fiberglass charge, UL94 V0.

Manufacturer: Hoyt Electrical Instrument Works Brand: Hoyt Electrical Instrument Works

The Hoyt LS-110 4.5" Switchboard Frequency Meters feature a 250 degree full deflection with easy to read white scale. The case is made out of rugged ABS plastic and it has four studs for easy mounting. Drop in replacement for Yokogawa Panel meters.

Manufacturer: Siemens Brand: Siemens Model: 6ED10522HB000BA6

LOGO! - The Leading Logic Module for Micro Automation:Simple installation, minimum wiring, easy programming: Thats LOGO!, the intelligent logic module from Siemens. The logo control system is perfectly suited for small-scale automation projects and makes life much easier by replacing many time switches and relays, counters and protective relays. Discover the benefits of this unique turnkey logo control logic module control solution for yourself.LOGO! SoftComfort Overview:LOGO! from Siemens offers you the support you need at a price you can afford. Perform small-scale automation tasks more quickly and free up space in your switch cabinet. With 8 basic logic functions and 31 special functions, the LOGO! logic module can replace a large number of conventional switching and control devices. The natural logic module choice: LOGO! now is even more versatile for analog value applications and simple control tasks.Line-Up Overview:With the logic module LOGO! Siemens offers you the ideal controller for simple automation tasks in industry and building services.The consistently modular design of LOGO! makes it extremely flexible. A wide range of modules allows individual expansion of LOGO! to 24 digital inputs, 16 digital outputs, 8 analog inputs and 2 analog outputs! Communication modules are also available for AS-Interface and KNX (Instabus network for building automation). Now it is also possible to use the analog output module to solve simple closed-loop control tasks. Heating and cooling systems can be designed with the RTD PT100 module using special functions for PI control, ramp response and analog multiplexer. LOGO! exists in the version LOGO! Basic with integrated display and in the version LOGO! Pure without display.LOGO!

Manufacturer: Trifield Brand: EMRSS Model: 100xe 60Hz

The Trifield ® BroadBand Meter is a gaussmeter, electric field meter, radio field strength meter all in one convenient and efficient unit. When measuring electromagnetic fields, the usual concern is usually magnetic fields, which can be difficult to measure. If a less sophisticated 1-axis gaussmeter is used, a reading of zero could result even where the field is strong. A 1-axis meter must be oriented correctly to measure the field (which is a vector). The 3-axis Trifield Meter solves that problem by measuring the true strength of the field regardless of which way it is positioned and oriented. The Trifield Meter conclusively can be used to scan quickly across an area without having to stop at each point to search for the orientation that gives a maximum reading. Another section of the meter detects AC electric fields, which can exist independently of AC magnetic field. The third section detects radio/microwave, such as from a leaky microwave oven. This meter's applications include the ability to measure AC magnetic fields and AC electric fields extremely quickly AND can measure major RF/microwave sources like leakage from microwave ovens or near field cell towers. Includes custom made aluminium case which fits Trifield Broadband Meter Model 100x as well as additional accessories. This carrying case allows to to protect your Trifield device and keep all the parts and components organized.

Manufacturer: Cable Wholesale Brand: CableWholesale

NETfinder 3 Test Sequences, Tone Generator and Portfinder

Manufacturer: Dawson Tools Brand: Dawson Tools Model: DCT220

The Dawson Tools DCT220 digital cable locator send a modulated signal down a cable which can be picked up by the receiver, allowing you to find and trace stubborn buried or in-wall cables. This device is user friendly and can be easily used in multiple configurations. Featuring a high voltage warning indicator, mute function, continuity buzzer, non-contact voltage detection, work and back light.