Electrical Testing - Page 68

Manufacturer: Instek Brand: GW Instek Model: SFG-2004

Based on the direct digital synthesized (DDS) technology and unique FPGA design, the SFG-2000 Series function generators are built with exceptionally high performance far exceeding that of any conventional function generators at a very competitive price. Stable output frequency, low distortion, and fine frequency resolution are the most remarkable characteristics of this product series. As a result of the 20ppm stability level and output waveform accuracy, The SFG-2000 Series well fit into a wide variety of applications, such as signal generator for experiment labs, reference signal for PLL (phase locked loop), and calibration and adjustment Source, 100 MHz Bandwidth for electronic devices. 1 User manual, 1 Power cord and 1 GTL-101. Power Source, 100 MHz Bandwidth: AC 115V +/-10 percent, AC 230V +10 percent/-15 percent, 50/60Hz. Measures 266mm width by 107mm height by 293mm depth.

Manufacturer: Hioki Brand: Hioki Model: 3286-20

The Hioki 3286-20 digital clamp-meter is a true RMS sensing, manual- and auto-ranging multimeter for measuring current, voltage, frequency, and power in electrical testing applications. It has a clamp that measures AC (alternating current) to 1,000A (amperes). The clamp has two jaws that can close around an electrical conductor up to 55mm (2.17 inches) in diameter or a busbar up to 80 x 20mm to measure current without touching or interrupting the circuit. A voltage cord with alligator clips is included for measuring AC voltage to 600V, frequency up to 1,000Hz (hertz), single-phase power to 600kW (kilowatts), and three-phase power to 1,200kW. Frequency can also be measured with the clamp. For power monitoring and analysis, the meter detects phase rotation, measures THD (total harmonic distortion) which can degrade the quality of the power being supplied by the system, analyzes individual harmonics to the 20th order, and calculates power factor up to 1.00 to determine how efficiently an installation uses power.The meter has push buttons to select the property to measure, and a 6,000-count LCD. To enable readings of rapidly fluctuating current and voltage, the slow function reduces the display update rate from four times per second to once every three seconds. The record function captures the maximum, minimum, and average readings for a property. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The unit operates on a single 9V battery, and turns off automatically after 10 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of the waveform. It has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects the appropriate operating ran...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-707

Loop Calibrator is a high performance solution for calibration, repair and maintenance of current loops. The new "Quick Click" knob making it extremely fast and easy to use. Large display and simple, quick-click interface for easy one-handed operation. Simultaneous mA and percent readout for quick, easy interpretation of readings. mA accuracy of 0.015 percent, superior to other loop calibrators in this price range. 1 microampere resolution for mA source, simulate and measure. Push button 25 percent steps for fast, easy linearity checks. 0-100 percent "span check" for fast confirmation of zero and span. Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests. 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM. Measures V dc to 28V. Single 9V battery that is easily changed without braking calibration seal 0 - 20 mA or 4 - 20 mA default start up modes. Innovative output adjustment dial with 1 microampere and 100 resolution. HART mode connects 250 O resistor in series with 24 V loop for compatibility with HART communicators. Current measurement: : 0 to 24 mA range, 0.001 mA resolution, 0.015 percent Rdg + 2 LSD accuracy. Voltage measurement: : 0 to 28V DC range, 1 mV resolution, 0.015 percent Rdg + 2 LSD accuracy. Loop power: while measuring mA, 24V. Operating temperature: -10/55 degree C. Storage temperature: -30/60 degree C. Measures 152mm length by 70mm width by 41mm depth. Including: protective yellow holster with test lead storage, instructions sheet (14 languages), single 9V alkaline battery, test leads and alligator clips, NIST- traceable calibration report and data. Weight: approx. 330 g (21 oz)

Manufacturer: Megger Brand: Megger

The Megger MIT410 Insulation and Continuity Tester with PI, DAR and switch probe has been designed for electrical testing by power utilities, industrials, telecommunication companies, commercial/domestic electricians and anyone with unique test voltage requirementsBe sure to Login to transcat.com for preferred member pricing.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-355

The Fluke 355 digital clamp-meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, frequency, and resistance in electrical testing applications. It has a clamp that measures AC (alternating current) and DC (direct current) to 2,000A (amperes) (1,400A AC RMS). The clamp has two jaws that can close around an electrical conductor up to 58mm (2.3 inches) in diameter to measure the current of large or multiple conductors without touching or interrupting the circuit. A set of test leads is included for measuring AC voltage to 600V, DC voltage to 1,000V, frequency to 1kHz (kilohertz), and resistance to 400kΩ (kilohms). The test leads are silicone-insulated for flexibility and resistance to heat and cold. The meter has a rotary switch to select the property to measure, and an LCD with a backlight for visibility in low light that turns off automatically after five minutes.The meter's inrush current function analyzes the surge current at the startup of motors and other inductive loads to provide accurate, stable measurements. It features a low-pass filter that reduces high-frequency interference to allow accurate measurements of complex wave shapes. The minimum/maximum function toggles to display the lowest, highest, and average readings. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the reading on the display after disconnecting from the circuit. A continuity buzzer confirms that the circuit conducts electricity. The unit operates on six 1.5V AA batteries, and turns off automatically after 20 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range bein...

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 886

High accuracy LCR/ESR meters were the first handheld meters of their type on the market, offering fast, reliable, and versatile testing at a low cost. With a wide range of test frequencies up to 100 kHz, these LCR meters can perform many different measurements - Z, L, C, DCR, ESR, D, Q, and diameter. Test conditions: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz (886), 1 Vrms, 0.25 Vrms, 0.05 Vrms. These instruments are designed for both component evaluation on the production line and fundamental impedance testing for benchtop applications. With a built-in direct test fixture, you can test lead components very easily. The optional 4-wire test clip can give a convenient connection to larger components and assemblies with the accuracy of 4-wire testing. Measurement parameters: Z, L, C, DCR, ESR, D, Q, and Diameter. 0.2 percent basic accuracy. Dual LCD display. SMD Surface Mount Tweezer Probe included. Very quick response, user friendly. Fully auto/manual selection. DC resistance measurement. Rechargeable battery / AC powered. Frequency accuracy: +/-0.1 percent. Level: 1Vrms, 0.25Vrms, 0.05Vrms, 1Vdc (for DCR). Level accuracy: +/-5 percent. Output impedance: 100 ohm, +/-5 percent. Operating temperature: 32 to 104 degree F (0 to 40 degree C). Storage temperature: -4 to 158 degree F (-20 to 70 degree C). Relative humidity: up to 85 percent. Battery type: Ni-MH or Alkaline (2 x AA size). Battery charge: Constant current 150mA approximately. Battery operating life: 2.5 hours typical. AC operation: 110V/220V AC, 60/50Hz with proper adapter. Low power warning: under 2.2V. Measures 6-57/64" length by 3-25/64" width by 1-57/64" height. 3 year warranty.

Manufacturer: Rigol Brand: Rigol Model: DS1104Z Plus

Rigol DS1104Z Plus 100 MHz Digital Oscilloscope       Best Selling Oscilloscope The DS1104Z Plus is a high quality 4 channel 100 MHz oscilloscope with a 1G Sa/s real time sampling rate. This scope also includes a 7" WVGA intensity graded color display for easy viewing. The DS1104Z Plus features an easily accessible source control button and 4 easy to access analog channel ports. With an industry leading 12 Mpts memory (upgradeable to 24 Mpts) and a waveform capture rate of up to 30,000 wfms/s, the DS1104Z Plus is a great solution for nearly any application. *Image shown is with Optional MSO Add-on Kit: RPL1116 DS1104Z Plus Features 100 MHz Analog Bandwidth Total of 4 Analog Channels 1G Sa/s Real-time Sample Rate Expandable to 16 total digital channels with optional upgrade Maximum Waveform Capture Rate of up to 30,000 wfms/s Includes 4 RP2200 150 MHz Passive HighZ Probes Low noise floor USB Host for Thumb Drive Large 7" Display 12 Mpts of Memory - upgradeable to 24     What makes the "Plus" so special? The new Rigol DS1104Z Plus now features a digital logic connection next to the USB port. Simply by purchasing the MSO Upgrade Package, users will now have the equivalent of Rigol's MSO scopes. This connection allows users to unlock an additional 16 digital channels on their oscilloscope. UltraVision Rigol's innovative UltraVision technology provides a deeper memory depth of 12Mpts standard and is upgradeable to 24 Mpts (with purchase of MEM-DS1000Z). The DS1104Z Plus also provides the ability to quickly focus in on certain piece of a recorded waveform. UltraVision × Full Visibility × Full Visibility The large 7" display of the DS1104Z Plus, with a resolution of 800 X 480 pixels makes it possible to view all channels on a single screen. This makes for better usability and more efficient analysis

Manufacturer: Global Specialties Brand: Global Specialties Model: LCR-600

The LCR-600 is a high precision test instrument used for measuring the inductance (L), capacitance (C), and resistance (R) of an electrical component. The LCR-600 has an operational frequency range of 100 Hz to 100 kHz and basic measurement accuracy of 0.3%. There is a dual LCD display, measurement voltage fixed at 0.6 V, auto-detect function, and open-circuit /short-circuit compensation. Use the meter to check ESR values of capacitors and inductors, sort and select components, identify unknown components, and general LCR values.

Manufacturer: Linkinstruments Brand: Link Instruments

As a logic analyzer the IO-3232A has a top speed of 200Msa/s, the IO-3232A records at a blistering rate of 6.4Gbs/s into its deep 256Kpt buffer. Event resolution of 5ns can easily be analyzed. But what makes it so special is the integrated 32 ch Pattern Generator. Fast and wide, the Pattern Generator clocks data out at the same furious rate as the Logic Analyzer. Precise sample to sample Input to output switching means that the IO-3232A can inject and listen to data on your bus. For ASIC designers, the IO-3232A offers a low cost solution to ASIC validation. For FPGA designers, you will no longer need to allocate precious logic and routing resources to soft logic analyzers. Timing closure can be achieved with a smaller device, just think of the cost saving in that! For embedded designers, external peripheral functions can be simulated using the Pattern Generator, which will greatly optimize your design workflow. Max sample rate: 200 MSa/s (internal), 200 Mhz (external) Channels: 32 (Logic Analyzer) + 32 (Pattern Generator) Buffer size: 256 KPt/channel Package contents: IO-3232A main unit, 4 wire harnesses, 11 clips, USB cable, CD Windows based software

Manufacturer: Psiber Data Systems Brand: Psiber Data Systems Model: PRO75

The Psiber Data PRO75 PingerPro Plus Fiber is a portable network testing device for analyzing and testing gigabit Ethernet networks over copper and fiber optic cable. The Pinger Pro stores and performs automated tests that conduct standardized testing and provide connectivity, device, port, and security information to help identify and analyze problems in an organization's network infrastructure. Link tests verify copper or fiber cabling connectivity and connections at 10/100/1000BaseT over copper and 1000BaseX over fiber. It tests cables and identifies faults including opens, shorts, miswires, and split pairs for network maintenance and troubleshooting. The PingerPro supports both IPv4 and IPv6 addressing for compatibility with location and identification protocols, and provides 802.1x authentication to verify access to secure networks. This portable network testing device is suitable for use by network technicians to verify the network connectivity of local-area networks in office buildings or schools.The Psiber Data PingerPro Plus Fiber has a 2.8" diagonal LCD touchscreen to display navigation and test results. It can store up to 1,000 test results for review. It comes with PingerPro Tools Applications software for storing, analyzing, and reporting test results. The PingerPro Plus Fiber comes with a terminator, a single mode 1310nm small form-factor pluggable (SFP) transceiver, a multimode 850nm SFP transceiver, an AC power adapter, a RJ-45 patch cable, a USB cable, a stylus, a case, a strap with two buckles, and instructions.SpecificationsCopper media accessRJ-45: 10/100/1000BaseTFiber media accessSFP: 1000BaseXCable testsPair lengths, opens, shorts, splits, miswiresPortsRJ-45, SFP adapterProtocols supportedIPv6, Link Layer and Cisco Discovery Protocol (LLDP/CDP)Display2.8" diagonal LCD touchscreenPower sourceRechargeable lithium-ion battery, 110/240V AC power adapter, USBWeight24 oz./0.7 kgDimensions6.75 x 3.3 x 2 inches/17.1 x 8.4 x 5.1cm (H x W x D)H is height, the vertical distance from the lowest to high...