|
|
-
3.8 of 5.0 with 38 Reviews
SALE PRICE: $663.90
Manufacturer: Megger
Brand: Megger
Model: GA-00374
Manufacturer: Megger
Brand: Megger
Model: GA-00374
|
The Megger test cable with Kelvin probe includes one black test cable for use with the Megger MOM2 microhmmeter or other compatible low-resistance ohmmeters. The cable has a Kelvin probe on one end for taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The Kelvin probe is held against the device to be tested.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.
-
3.8 of 5.0 with 5 Reviews
SALE PRICE: $699.99 13% OFF
Manufacturer: Hantek
Brand: Hantek DSO8072E
Manufacturer: Hantek
Brand: Hantek DSO8072E
Acquisition *Sample Modes: Real-Time Sample * Normal:Normal data only * Peak Detect:High-frequency and randon glith capture * Average:Wavefom Average, selectable 4,8,16,32,64,128 * Sample Rate Range:1GS/s * Record Length:2M *Bandwidth:70MHz *Rise Time at BNC( typical):5ns *Set Level to 50%(typical):Operates with input signals ≥50Hz *Waveform Generator Mode Frenquency Range:1Hz(DC)~25MHz * Output Impedance:50 Ω *General Specifications * Display Resolution:640 horizontal by 480 vertical pixels Temperature:Operating: 32℉ to 122℉ (0℃ to 50℃); * Nonoperating: -40℉ to 159.8℉ (-40℃ to +71℃)
-
3.8 of 5.0 with 16 Reviews
SALE PRICE: $770.00 1% OFF
Manufacturer: Dranetz
Brand: Dranetz
Model: DB107CT
Manufacturer: Dranetz
Brand: Dranetz
Model: DB107CT
AC Flexible Current Probe, Amps AC 10 to 500A, AC Frequency Response 40 Hz to 5 kHzConnector Type Dranetz Hypertronics Connector, For Use With Mfr. DBPX108, DBPG106, DBPV500, DBPV10, DBPVFLEXIncludes (3) Mfr. TR-2500A Current Probes
-
3.8 of 5.0 with 43 Reviews
SALE PRICE: $819.99 1% OFF
Manufacturer: T&O
Brand: Toto
Manufacturer: T&O
Brand: Toto
DIR: Setting the coordinate direction Linear and non-linear error compensation. Self-diagnostic function for calculation error. Instant power failure memory. RS232 output. Power consumption: DC 8V~30V, 0.8A. Resolution selection: 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1.5, 10mm. Linear Glass Scales: Resolution: 0.005mm. Accuracy: ±(5+5L/1000) µm. Maximum response speed: 47 in/sec. Includes: All mounting hardware is provided. 2-Axis Packages: (1) Standard DRO counter. (2) Linear glass scales.
-
3.8 of 5.0 with 14 Reviews
SALE PRICE: $890.00 4% OFF
Manufacturer: Megger
Brand: Megger
Model: 242021-30
Manufacturer: Megger
Brand: Megger
Model: 242021-30
|
The Megger 242021 series potential test lead set includes one red and one black test lead with single hand spikes for use with compatible Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. When used with compatible current test leads, the Megger 242021 series potential test lead set allows the operator to take four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.
-
3.8 of 5.0 with 35 Reviews
SALE PRICE: $892.00 1% OFF
Manufacturer: Veris
Brand: Veris
Manufacturer: Veris
Brand: Veris
Din-Mount, Power and Energy Meter, Data Logging: 3 Timestamped 32-Bit Configurable Data Buffers, 60 Day Readings (15-min Intervals), RS-485 Serial BACnet MS/TP Protocol, 2 Pulse Contact Accumulator Inputs, 5-Year Warranty
-
3.8 of 5.0 with 44 Reviews
SALE PRICE: $917.61
Manufacturer: Global Specialties
Brand: Global Specialties
Model: 1350
Manufacturer: Global Specialties
Brand: Global Specialties
Model: 1350
The 1350 features programmable control via USB interface and microprocessor controlled circuits. The voltage and current are controlled by a 12-bit D/A converter with resolutions as high as 10 mV and 1 mA respectively. There is series 0-64 V, 0-3 A operation. The digitized system enables you to input all data via computer keyboard. The protections against over voltage and current are completely regulated by the software producing a safe and reliable instrument.
-
3.8 of 5.0 with 27 Reviews
SALE PRICE: $929.63 1% OFF
Manufacturer: AEMC
Brand: AEMC
Manufacturer: AEMC
Brand: AEMC
AEMC 1045 DIGITAL/ANALOG MEGOHMMETER, 400KOHM
-
3.8 of 5.0 with 14 Reviews
SALE PRICE: $975.00
Manufacturer: Megger
Brand: Megger
Model: MIT481-EN
Manufacturer: Megger
Brand: Megger
Model: MIT481-EN
|
The Megger insulation and continuity testers has been designed for electrical testing by power utilities, industrials, telecommunication companies, commercial/domestic electricians and anyone with unique test voltage requirements. The wide range of features also makes it ideal for maintenance technicians and engineers. Designed to cope with the additional requirements of the telecommunications industry, insulation testing as standard, plus higher voltages as required. In addition, the voltage detection test inhibit feature has been raised to 75 V (from 50 V), to allow testing of cables with coactivity coupled induced voltages, which would normally inhibit such testing with a 50 V protected instrument. It includes measurement of cable distance by capacitance, providing a convenient cable length without the need to use TDR technology. CAT IV 600 V rating - provides greater safety when testing at higher voltage levels. Dual digital display readout - allows display of complimentary test information simultaneously. Adjustable continuity limit alarm - allows pass/fail limits to be sent to speed testing. Auto fuse warning - warns of fuse failure automatically. No need to test the fuse manually. Buzzer select button - enable or disable buzzer as required with resistance also displayed on the screen. Specification: Nominal test voltage: 50 V, 100 V. Frequency: 40 - 450 Hz (40 Hz - 99.9 Hz) +/-0.5 percent +/-1 digit (100 Hz to 450 Hz). Result storage: Capacity: >1000 test results. Power supply: 5 x 1.5 V cells type IEC LR6 (AA, MN1500, HP7, AM3 R6HP) Alkaline NiMH rechargeable cells. Battery life: 2200 insulation tests with duty cycle of 5 sec ON /55 sec OFF at 1000 V into 1 M Ohms. Measures 8.66" length by 3.63" width by 1.97" height. The instruments meet EN 61010-1 (1995) to 600 V phase to earth, Category IV. Refer to safety warnings supplied. E.M.C.: in accordance with IEC 61326 including amendment No.1.
-
3.8 of 5.0 with 16 Reviews
SALE PRICE: $1,029.87
Manufacturer: Megger
Brand: Megger
Manufacturer: Megger
Brand: Megger
|
Available for sale only in the United States For industrial, telecommunications, and special applicationsInsulation testing to 1000 V and to 200 G ohms Continuity testing at 200 mA down to ohms Analog and dual digital display Insulation & continuity limit alarms PI/DAR timer function Voltage measurements to 600 V True RMS Test data storage and transfer by Compact Flash or Bluetooth downloading AC/DC voltage measurementThe Megger MIT400 Series of industrial insulation and continuity testers combine the latest range of measurement techniques with instrument design to provide a state-of-the-art tester that is compact and comfortable to hold. This listing is for EACH. Product Type: Insulation Testers Operating Temperature Range ( F): 14 - 131 Storage Temperature Range: -25 to +70 C Qty/ea: 1 Resistance (Range): 20 G ohm Humidity: 90% RH at 40 C max. Accuracy: 3% 2 digits 0.2% to 4% per G ohm;3% 2 digits 2% per 100 M ohm Range: 20 G ohm Dimensions: Instrument: 220 x 92 x 50 mm ( in. x in. x in.) Instrument and case: 456 x 178 x 89 mm (18 in. x 7 in. x 3.5 in.) Safety: EN 61010-1 (1995) to 600 V phase to earth, Category IV Power: 5 x 1.5 V cells type IEC LR6 (AA, MN1500, HP7, AM3 R6HP) Alkaline Brand: Megger Model: MIT40X-EN Manufacturer number: MIT40X-EN
|
|