Electrical Testing - Page 716

Manufacturer: SeeedStudio Brand: Seeedstudio Model: TOL01241P

DSO Nano v3 is a 32bit digital storage oscilloscope. Based on ARM -M3, it's equipped with 320*240 color display, SD card, USB port and recharging function. It's compact, simple to operate; meets the basic demands of school lab, electric furniture repairmen and electric engineering. The version 3 of DSO Nano differs from version 2 in that it does not use white plastic shell. Instead, it uses black metal shell which is more durable and strong.

Manufacturer: XiTRON Technologies, Inc. Brand: XiTRON Technologies, Inc. Model: T5 Color: Black

The T5 Universal External Power Supply has 100-240Vrms, 50-60Hz with a 2.5mm 12VDC output plug and a three prong IEC320 AC inlet receptacle, plus a three-prong AC power cord.

Manufacturer: Oriental Motor Brand: Oriental Motor

Pulse Generator, Ac100V +10%, 50/60Hz, 0.15A

Manufacturer: IDEAL Brand: Ideal Nutrition

Tone Generator and Amplifier Probe Kit

Manufacturer: Amprobe Brand: Amprobe Model: TACH-10

This Amprobe combination contact and non-contact tachometer measures rotational and surface speed of motors, conveyor belts, and other moving systems. Contact measurements can be taken in revolutions per minute (RPM), meters per minute, feet per minute, or yards per minute, while non-contact measurements can be taken in RPM. All measurements are accurate to + or - 0.1%. The tachometer has a 15 x 33mm (0.6 x 1.3 inches) LCD display that presents test results and unit of measurement. Non-contact measurements are taken using an infrared beam function that works at a distance of 5 to 30cm (2 to 13 inches) from the target. The unit comes with cone and funnel contact tips for measuring shafts with center holes and flat-end surfaces. This Amprobe tachometer is designed for use by mechanics, mechanical engineers, and industrial equipment operators. Specifications Power supply (1) 9V battery Non-contact rotation range 10 to 99,999 RPM Contact rotation range 10 to 19,999 RPM Contact surface speed ranges 1 to 9,999.9 m/min, 3 to 30,000 ft./min, 1 to 10,000 yd./min Dimensions 266.6 x 177.8 x 81.28mm/10.5 x 7 x 3.2 inches (H x W x D) LCD dimensions 15 x 33mm/0.6 x 1.3 inches Weight (including batteries) 544.3g (1.2lb) Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat III 1000V and Cat IV 600VH is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Tachometers measure the rate of rotation or surface speed of motors, conveyor belts, and other moving systems. Tachometers are installed in cars, boats, and other motor vehicles to monitor the engine’s RPM. Handheld tachometers verify the accuracy of these installed tachometers. Tachometers may take contact or non-contact measurements. Contact tachometers take measurements through direct contact with the moving surface, while non-contact tachometers take measurements from a distance us...

Manufacturer: Vetus Brand: ETCR

ETCR017AD AC/DC Clamp Leakage Current sensor is widely applied in those fields as electricity, communications, meteorology, railroad, car industry, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments. Technical Specifications Function: Measurement of AC/DC current, leakage current Power Supply: Zn-Mn dry battery, 6RL61, 9V. Continually using for 100 hours, connecting external power supply is also available for long time using. Test Mode: Clip-on CT, non-contact measurement Clamp Size: 16X18mm Input Range: 0mA-60.0A AC/DC Output Voltage: 10mV/A;100mV/A(corresponding) Output Range: 1V peak max Resolution: 1mA AC/DC Accuracy: ±3%FS(23℃±5℃，below 75%rh) Frequency: AC: 45Hz-400Hz DC: DC-100kHz Test Position: Tested wire in the jaw center Calibration:Adjust ZERO to calibrate, eliminate external electric field interference Line Voltage: Lower than 600V Working Current: 5mA Working Temperature and Humidity: -10℃-50℃,below 80%rh Limit Temperature Error: -10℃-0℃ and 40℃-50℃, within 2%rdg Storage Temperature and Humidity: -10℃-60℃,below 70%rh Insulating Strength: AC 3700V/rms(between the alloy of the clamp and the housing) Output line:Inner core - signal output positive; shield - signal output (optional plug BNC etc) Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Manufacturer: Peakmeter Brand: PEAKMETER

Product Features: » Design according to the IEC61010-1CAT Ⅲ1000V.CATⅣ600V » Auto Calculate PI and DAR » Store /Load Function » Compare function » Auto discharge for capacitive load » Timer Function for insulation test » Lock function for insulation test »Low Battery Indication » DCV and ACV Test » Continuity test » Auto power Off » Digital and analog display Product Specification: INSULATION TESTS: 50V(0 %～+20%) 0.01MΩ～50MΩ±(3%+5) 100V( 0%～+20%) 0.01MΩ～100MΩ±(3%+5) 250V( 0%～+20%) 0.01MΩ～250ΩM±(3%+5) 500V( 0%～+20%) 0.01MΩ～500MΩ±(3%+5) 1.00GΩ～5.00GΩ±(5%+0.1GΩ) 1000V( 0%～+20%) 5.00GΩ～10.00GΩ±(10%+0.2GΩ) SHORT CIRCUIT CURRENT:1.8mA Multimeter functions: DC Voltage Test: 0.1～1000V±0.5% AC Voltage Test: 0.1～750V±1% Continuity Test: 0.01Ω～200Ω±0.5% Power Supply: 6x1.5V AA batteries Product Size: 180mm x 140mm x65mm (7.1" x 5.5" x 2.6") Product Weight: 950g(20lb) Category: CE ETL CAT Ⅲ1000V.CATⅣ600V Packing size: 340*265*103mm Packing weight: 2060g Package include: 1*MS5203 DIGITAL INSULATON TESTER 1*Colorful Box 1*User Manual 1*Holder 1*Rubber Cover 1*Meter Bag 1*Alligator clips 1*Test cable 1*Signage 1*Sponge mats 1*Static filmKindly notice: As HYELEC is our old brand, and the new brand is PEAKMETER, but we still has the items which the brand is HYELEC, so the item we sent will include PEAKMETER and HYELEC, but please do not worry about it, we guarantee these item 2 logo are the same products.

Manufacturer: Generic Brand: Generic Model: YC-US2-160411-183

Repair broken leads on test equipment and chargers or make your own low-voltage jumper leads with this electrical clip set. The set includes six 2" alligator clips, six 1-1/2" alligator clips, ten mini alligator clips, two 30 amp charging clips, two 25 amp charging clips and two 10 amp charging clips in equal numbers of black and red. The spring clips have PVC insulation and the entire electrical clip set comes organized in a PVC tray. Repair broken leads on test equipment and chargers Make your own low-voltage jumper leads Spring clips have PVC insulation, equal numbers of black and red Set comes organized in PVC tray

Manufacturer: VEEDER-ROOT Brand: Veeder-Root

New, VEEDER-ROOT Digital totalizing counter. Model Number: A103-A15. Includes 1 battery and mounting hardware.

Manufacturer: Multi-Contact Brand: Multi-Contact

Technical Specification Item Modular Test Clips Plug and Connector Description Safety Sheathed 4mm Banana Jack Color Black, Red Length 5 Safety Rating CAT IV 600V, CAT III 1000V Standards UL Max. Amps 8 Max. Voltage 1000 Insulating Material Silicone For Use With For Standard Test Meters Accepts 4mm Banana Plugs Includes (2) Probes Manufacturers Warranty Length 1 yr. Application General Purpose This listing is for each.