Electrical Testing - Page 736

Manufacturer: JDSU / Viavi Brand: JDSU Model: 2302/11

The JDSU SmartPocket OLP-3x series next-generation small rugged optical power meters are ideal for quickly easily and conveniently measuring optical power level and loss in fiber networks from the field. The instruments rugged ergonomic design and large sharp display show relevant results and settings at the same time. Their intuitive one-button operation and automatic wavelength recognition is why technicians choose SmartPocket OLPs when they test fiber. SmartPocket instruments unprecedented data storage capacity for saving up to 100 results and optional micro USB port for downloading results to a PC fulfills all of your testing and reporting needs OLP-34-35-38 PDF [504KB]

Manufacturer: Megger Brand: Megger Model: 45552EL-AMZN

The Megger industrial insulation tester is an insulation resistance meter with built-in voltmeter for measuring insulation resistance, voltage, and continuity in electrical systems. The auto ranging digital meter includes true root mean square (TRMS) and direct current (DC) voltage measurement. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters. The unit has a voltage detection test inhibit feature prevents testing when a circuit has a voltage of greater than 50V. The tester is safety rated to European Standard EN61010-1, Category IV, 600V and is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The Megger MIT400 series is commonly used by cable installers and maintenance workers.

Manufacturer: Siemens Brand: Siemens

Technical Specification Item Power Meter Display No Display Mounting DIN Rail Input Voltage 80/346VAC Amps 4000 Accuracy +/- 0.20% Measures Voltage, Amps, Kwh, Kw, Kvarh, Kva, Kvah, Power Enclosure Rating Not Enclosed Hz 50/60 Meter Range 8 to 520A Operating Temp. Range 20 Degrees to 140 Degrees F Height 3.30 Width 9.50 Depth 1.60 Standards UL Listed, UL Standard 61010-1, IEC 61010-2-030 cUL Certified, CAN-CSA Standard C22.2 No. 61010-1 Features BACnet Modbus Compliance and Restrictions None This listing is for each.

Manufacturer: GW Instek Brand: GW Instek Model: LCR-816

The LCR-800 Series are high-end digital LCR meters for component/material measurements, applicable to various R and D activities and assembly lines. The large 240 x 128 dot matrix LCD display provides ample room for two measurement items and setup parameters, allowing you to grasp measurement results quickly. All test modes are able to measure supplementary factors, such as R/Q, C/D, C/R, L/Q. 100 sets of measurement setup memory allow sharing a single unit among multiple testing conditions or sites. For a better viewing experience in a standard PC monitor, proprietary Windows based software is accessible via the RS-232C terminal. The handler interface is also a standard feature for meters. 100Hz to 2kHz test frequency. 0.1 Percent accuracy. Measures 330mm width by 149mm height by 437mm depth.

Manufacturer: Keysight Technologies Brand: KEYSIGHT TECHNOLOGIES Model: E3641A

Keysight basic DC power supplies offer essential features for a tight budget. The single & dual output, 30-100 W GPIB E3640 series provide small, compact size for bench and system use; low output ripple and noise; and built-in measurements and basic programmable features. The Keysight 30W, single output E3641A is a stable and reliable power supply for benchtop and basic automated test applications, and enables versatile solutions for tests that require moderate speed and precision with both GPIB and RS232. Output ratings (@ 0°C to 40°C): -Range 1: 0 to 35 V, 0.8 A -Range 2: 0 to 60 V, 0.5 A Programming accuracy (@ 25°C ±5°C), ±(% output + offset): -Voltage:

Manufacturer: Megger Brand: Megger Model: 242002-18

The Megger 242002 series duplex test lead with fixed-point duplex hand spikes is for use with Megger DLRO10HD, DLRO10, DLRO10X, 247000, 247001, 247002, 247100, 247101, and BT51 digital low-resistance ohmmeters. This duplex test lead measures both current and resistance when taking four-wire resistance measurements, which are more accurate than two-wire resistance measurements and allow low resistance values to be detected. The lead has a maximum test current input of 10 amp. There is 0.35" (9 mm) between the current and potential probe tips on the duplex hand spikes.A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization ...

Manufacturer: Aaronia Brand: Aaronia

Aaronia EMC / EMI Spectrum Analyzers Active Differential Probe [custom2] Download Manual Download Data Sheet [/custom2]

Manufacturer: AEMC Brand: AEMC

The Ground Resistance Tester Model 6416 measures ground rod and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test it. The Model 6416 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. Three new features unique to AEMC® are: Test frequency selection provides more accurate results in inductive environments Touch voltage indication  indicates the voltage on the display along with a warning buzzer when the voltage derived from current and resistance measurements detect a potentially dangerous touch condition Loop resistance indication alerts the user to the fact that the measurement may not be ground resistance The Ground Resistance Tester Models 6416 and 6417, measure ground rod and grid resistance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting the ground system under test or de-energizing them. The Models 6416 and 6417 simply clamp around the ground conductor or rod and measure the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.   Two new features unique to AEMC ® are test frequency selection and touch voltage indication. The ability to select the test frequency provides more accurate results in inductive environments

Manufacturer: Huanyu Instrument Brand: Huanyu Instrument®

Huanyu Instrument Huanyu Instrument® mainly provides instruments and tools. We provide voltage customized services, specific requirements can be contacted by email, we will respond promptly.After your order is confirmed, the product usually takes 7--13 business days to arrive to your hand. Product Description Four-Point Probe Resistance Tester(DC) is suitable for the use in the testing of the sheet resistance and resistivity of ITO coated glass, FTO coated glass, AZO coated glass, and other conductive thin film that with uniform and rigid structure. Technical Datas  1) Testing resistance range:10 μΩ - 2.00 kΩ (Five testing resistance range with different testing current) 2) With the function of sorting, is suitable for the use in commercial manufacture. 3) The deviation of the Resistance Tester：Please refer to the Table 4. 4) The type of Four-Point Probe: Linear four probe. 5) The Material of the Four-Point Probe: tungsten carbide . 6) The distance between two neighbouring probes :1mm 7) The deviation of the distance between two neighbouring probes:

Manufacturer: AEMC Brand: AEMC Model: 6290

The AEMC 6290 digital microohm meter is a four-input with two adjustable test current/resistance ranges for precise, low-resistance measurements from 0.1 microohm (μΩ) to 19.99 milliohms (Ω) of switchgear and circuit breaker contact resistance and airframe, rail, and pipeline bonding. The test current can be adjusted from 10 to 100% of the range. Four input terminals enable Kelvin-type, four-wire resistance measurements, which are more accurate than two-wire resistance measurements. The memory function allows storage of up to 200 readings which can be downloaded to a PC with the included software. The software is compatible with Windows XP, Vista, 7, and 8, and requires at least 80MB of hard disk space. A cable with USB connector is included for connecting to a PC. Thermal sensors within the meter protect against damage due to overheating by disabling the test current when testing time reaches a set limit. Built into a hard carrying case, the meter has a 4-1/2-digit LCD with a backlight for visibility in low light. The display shows readings numerically and on a 35-segment bar graph. It has a 110V power cord for connecting to a 100 to 130V AC power supply. It comes with a set of Kelvin-type test leads with C-clamps, data download software, a USB interface cable, a 110V power cord, a 12A replacement fuse, an accessory pouch, and instructions. Milliohm meters are commonly used for electrical maintenance and testing in industries such as heating, ventilation, and air conditioning (HVAC), transportation, telecommunications, power plants, and utilities, among others. Accuracy and resolution specifications vary according to the range being measured. The meter meets International Electrotechnical Commission (IEC) safety standard 61010-1.Specifications Resistance measured0.1μΩ to 19.99mΩTest current/resistance ranges200A/1,999μΩ, 100A/19.99mΩStandards met International Electrotechnical Commission (IEC) safety standard 61010-1 Power supply110V power cord for AC power supplyWeight11kg/24.25 lbs.D...